The router is good and bad, and the router is good and bad

It would be nice to change to a lock-proof router.

There are some reasons why routers are good and bad:

1. Hardware problems with the router itself. When encountering an unstable router signal, the first thing to consider is the router itself. For example, there is poor heat dissipation of the router in summer, and the internal hardware of the router is very hot.

In such a situation, the user can first feel whether the temperature of the router hardware is very hot, and if it is very hot, the router should be placed in a well-ventilated place, such as near a window or in front of an electric fan. If possible, try a different router to determine the cause of the problem.

2. Update the router firmware. If you rule out the heating problem or there is no router to replace nearby, you can update the router firmware and try to set the router again. Note that when upgrading the router firmware, you can back up the router information to facilitate the restoration after completion.

3. The problem of placement. The transmission distance of the router signal is limited, and the attenuation will be even more severe when encountering obstacles. Therefore, the placement of the router plays a crucial role in whether the wifi signal can cover the entire home.

4. The signal of the wireless router is interfered with. If there are some interfering devices near the wireless router, it is also easy to cause signal instability, such as multiple routers together, and the frequency band channel between multiple routers and routers is the same or adjacent, which may also cause this problem, which is relatively rare.

The reasons why routers are sometimes good and bad are:

1. Poor heat dissipation leads to overheating of the chip, which affects the working performance;

2. Subjected to electromagnetic interference;

3. The network cable of the router is loosely connected;

4. Aging router;

Ways to fix the good and bad times of the router:

2. Try not to use wireless mouse buttons, especially near wireless devices such as set-top boxes, away from microwave ovens, cordless radiation sources, and replace 5GHz routers if possible, and avoid congestion in the Paiju GHz frequency band;

3. Check whether the connection between the WAN port and the LAN port of the router is loose, and reconnect to ensure reliable connection;

4. Replace the router.

Wireless routers come and go, and instability doesn't necessarily mean that the router is damaged. The reasons why you can rent wild energy are as follows:

1. There may be a strong signal interference source next to the wireless router;

2. The router firmware and hardware do not match, causing the router to work abnormally, resulting in an unstable "wifi" connection;

3. The "Wi-Fi" optimization function is enabled on the mobile phone, and the connection function in poor condition is not used, and the connection to "Wi-Fi" is not checked in the dormant state. Turning on these features will disconnect the phone from the wireless router in certain environments;

4. The transmission power of the wireless router "wifi" is too small, or the device is too far away from the router, and there is a shield in the middle. If the "wifi" signal is too weak, it will also drop from time to time;

5. When there are multiple wireless routers nearby, the same channel may have an impact on each other's posture.

6. The hardware of the router "wifi" transmitter module or the mobile phone "wifi" receiving module is faulty, resulting in the "wifi" being disconnected.

Determine whether the router at home is really bad or fake, normally speaking, the service life of the router is generally more than 2 years, and we should take the initiative to replace it no matter how long the time is.

Common router faults can be troubleshot in the following points:

1. Whether the voltage at home is stable, if the voltage at home is often unstable, the router working environment will be directly affected, which will lead to the failure of the router.

2. Whether the router power supply is matched, whether the power adapter used when the router was purchased is matched, if it is not the original, it is likely to cause the current to be too large or too small to cause the situation that it cannot be used.

3. Whether the router is placed in a position that is easy to get wet, such as outdoors, in the kitchen, in the bathroom, etc.