The industrial computer was flooded, and after taking it to dry, it was replaced with a power supply

This could be a problem on the motherboard, as your power supply current is unstable and the protection features on the motherboard come into play. It is also possible that the overvoltage protection is unique to ATX power supplies. As for the problem that occurs after ten days, you can see if the CPU has a fan with water and the motor rusts, and after half an hour, the CPU heat dissipation requirements increase and the fan speed is not enough.

I beg your pardon for that!

Check that it is thoroughly dry.

Check the fan and add lubricating oil to each component.

Check the settings for auto-shutdown temperature and fan shutdown**.

Check the stability of the power supply.

Check the motherboard for water stains that cause short circuits.

Check the links for each part.

Check the software settings.

Check the peripherals.

Your question is confusing.

You see if your power supply is enough.

It has nothing to do with the power supply. Because your factory uses a voltage of 380V, but the 380V circuit uses a live wire and neutral wire to be 220V.

For the problem of automatic shutdown, it is best to check the temperature of the various parts inside the computer, and according to the details you provide, it is most likely that the temperature is too high.

The power voltage is 380V, and the standard voltage of ordinary power supply is 220V. Some components will be damaged when the ordinary power supply works for a long time under too high voltage, so it can be used normally at first, and it will be broken after a period of time.

It may also be caused by too high temperature, mainly check whether the cup cooling fan can work normally, as well as the temperature of the power supply.

If there is a problem with the CUP cooling fan, the heat accumulates in large quantities locally, even if there is an air conditioner, it will not play much role, the air conditioner will only cool down as a whole, and the fans of each component will be used.

Your power supply has been used for more than 10 days, and these power supplies can't withstand 380V power supply, and they all have 220V power supply.

Aging is normal for you to overload use.

It's self-adjusting, according to your operation, Hongyan chooses the right AI or opponent for you, to put it simply, Chang takes you for 1 second, you can press the Xunyu 1-2 times, and it will choose a simple opponent for you, if you can press the keyboard 4-5 times in 1 second, it will choose a high-level opponent for you, probably like this.

This battery seems to be quite expensive, if you want to check it above, you should call the police

If the important thing is that the computer is running, then just buy a model of the same model

Buy the same model, no problem.

In fact, it is an industrial computer, and you can find the first of the industrial computer, which is generally divided into customized and standard, and the customized type is expensive.

Industrial computers have their own over-current and over-voltage protection, so it is easy to burn out and it is not industrial-grade.

Buy a battery again and install it, the computer city has it, and the old motherboard can also be used.

I only know that the computer systems used in industrial control are old systems because they are stable.

It should be commercially available and the system is modified.

The kb-lk key means to lock the keyboard, i.e., keyboard-locker.

The KB-LK key is used in industrial and special occasions in computers, and is a keyboard lock key specially made to prevent misoperation and data leakage. And this key is in the case cover of the industrial computer. The outside is locked with a key.

It not only ensures that the data is not leaked, but also protects the computer from data loss caused by misoperation.

"KB-LK" is the keyboard switch, press the switch, the "KB-LK" light is on, the keyboard is locked at this time, you can not input information from the keyboard, press the switch again, the "KB-LK" keypad lock switch pops up, the "KB-LK" light is off, at this time, you can enter information through the keyboard.