ATI2400 can t run 3DMark Vantage

The 3DMark Vantage is designed for DX10 graphics cards and can only run on Windows Vista SP1.

The following are the configuration requirements officially given by Futuremark:

1. Processor: Requires support for SSE2 instruction set, dual-core processor is recommended, and the performance level is equivalent to Intel Core 2 Duo E6600, AMD Athlon64 X2 6000+ or higher.

2. Graphics card: It is required to be fully compatible with DX10 specifications.

3. Display device: the minimum resolution is 1280 1024, and 1920 1200 is required to run all tests.

5. Hard disk: 1GB free space is required.

6. Operating system: Windows Vista SP1 only, other versions are not supported.

It's worth mentioning that while FutureMark doesn't mention the support issue, it doesn't seem to have any impact at the moment.

Running 3DMarkage requires a Vista system and an DX10 graphics card.

Check if you are using the version of catalyst, as well as the operating system and whether it is the latest version of 3DMark.

Graphics: ZOTAC GTX460-1GD5 Destroyer Memory: 4GB Kingston Hack Prothea 1600Hz 3DMarkVantage No problem, all normal.

There's nothing wrong with the P-grade, at least it's worth the price.

If it is a graphics card purchased in the past two years, it can be seen from the P15600 score that it should be the GTX 460 high-frequency version (Hetan core frequency above 800MHz) or the 470 6870 5850 high-frequency version level.

These four are all high-end graphics cards at present, with extremely strong performance, and can run smoothly at the highest resolution and high image quality for large-scale 3D games, so there is no need to worry about large-scale stand-alone games being able to play the manuscript of the studio.

It's fun, hey, the configuration on the first floor, you can give the town to the average person, I'll talk about your 5970*4 cow b first, but is there a difference between your 5970*4 and 5970*2? Crossfire is a dual-display internal dual card, 4 roots and 2 blocks Is there a difference in performance? Point 2 3DMark06 Do you know what it is?

Do you know what the highest record is? 3DMark06 world record is 3w you 8w? God-like you.

And the landlord said that 3DMark Vantage knows what this is? There are still a few ...

To get back to the point, I was a little excited to see God. Landlord, your score is normal, 3DMark Vantage measured the performance of the DX10, not the DX9, and running 1W4+ is already very good. But depending on your configuration, it's good to add some memory.

It depends on how many I sapphire 5970x4 i7 975ee 12g memory run 06 is 78576 points less than 80,000.

I can't imagine that there is such a stupid person on the first floor, and I asked LZ that you ran a few points!!

Although your configuration is quite high-end, it is normal for Vantage to score more than 1W After all, Vantage is much stronger than Mark06 It is very good to be able to run more than 1W.

A card runs vantage and mark06 are to be patched, but the specific patch I forgot (after more than half a year) You can check it on the Internet.

However, LZ doesn't have to worry too much about the score, after all, strong gaming performance is important, and 3DMink is just a test program, and it doesn't prove your game performance.

The LZ machine is so good that you can play the game to your heart's content, so why care about the score.

LS's look is. 12G RAM??? What system do you have??? 3DMark can only be used under the win system, and the maximum memory supported by the win system is only 6g, are you so hanging? 12g？Bluffing children?

Notebook bar, it looks like an inch Y550, the minimum required resolution is 1280x1024, so your machine can't run.

Even if you change it to an entry and cancel the additional test, it won't work.

As long as the graphics card and memory are properly matched, this score is normal. My configuration is i7 860 4G DDR3 1333 RAM GTX260+ graphics card, and my score is 16986 points. So it's not unusual to run 17,000 points.

The i7 920 is a bit more high-end than the i7 860, and if it is equipped with a GTX285 or higher graphics card, and the memory is three with a total of 6G memory, it will score 17000 or even higher. Here's a screenshot of my own configuration after testing.

The i7 920 does not overclock 5000-6000 points.

The total score of 17000 is mainly determined by the graphics card.

My i7 920+4890 is 17000+920 OC4G 4890 core super 1000hz video memory super 4000 score close to 20000

People are asking about vantage, not 06, okay.

Please change the answers to the above two people.

It depends on what mode you choose, and what resolution do you have?

The temperature rises. Considering the stability of the whole machine, the turbo frequency may have struck.

What I can say is, normal!

Opinion? 1.You shouldn't post a "standalone sound card", this has no effect on the 3DMark score.

2.Add another 2G to the memory, otherwise many large software is now open out of memory is not enough, resulting in the system to allocate a part of the hard disk space as virtual memory, the speed of virtual memory and physical memory is simply a world of difference, if you run large software, or multitasking may be full of physical memory and use virtual memory, resulting in performance degradation.