After installing the Yanxiu tool, the CAD2008 menu cannot find the Yanxiu tool

64-bit win7 can theoretically be compatible with 32-bit applications,But in fact, it is not 100% compatible,The Yanxiu tool installed by the landlord belongs to this kind of 32-bit program that cannot be installed normally,There are several solutions to this kind of problem:

After the system is formatted, install 32-bit win7 or 32-bit XP, the latter is the safest, and the dual system is also installed.

Wait patiently for the 64-bit version of the "Yanxiu tool", but the hope is very slim, because the current 64-bit program is not mainstream.

64-bit win7 install "virtual xp", you can set up a virtual xp environment without formatting, in this virtual environment you can install all the old versions and win7 all incompatible programs, but when you use the virtual environment, the software will run slower, but the speed will return to normal immediately after exiting the operating environment. Virtual XP needs to be from the online ** software, please landlord himself to use "virtual XP" to search for related software, installation of this software is very simple, fool level. If you can't find this software, just send me a netizen text message.

cad2008

Support Yanxiu ,,, whatever your system.

Win7 with x86 or x64

XP is fine.

I just changed to win8 today

The x64-bit system is also installed.

1.Install the above versions of Yanxiu toolbox; (I haven't tried anything else) 2Will. Copy it to the installation directory of Yanxiu Toolbox. (XP or win7x86 flagship version under the installation of Yanxiu will have one more file,Find a way to get it.) ）

3.Open AutoCAD

4.Move the mouse over the blank space of the toolbar, right-click and select "Custom(c).".

5.In the pop-up custom window, select the "icon with a plus folder" to add the file in step 2 (note: preview the file and press open after finding it).

6.At this time, "Apply" in the "Customize" window is activated, click "Apply". Follow the prompts to reboot and you're done! (Note: English is terrible; The meaning may be "application").

If in doubt, contact us directly.

cad2008 installation Yanxiu toolbox installation directory can not write permissions,Unable to run,This is due to nonsense for the combustion of the hole to install the non-conforming version of the toolbox caused by the cad software crash,Need to reinstall the software to solve the problem,The specific operation steps are as follows:

1. First launch the CAD installer, and then click Install in the lower right corner

<>3. Fill in the installation path of the software

4. Then, the CAD software will start to be installed automatically

5. After the installation is completed, you can use the software normally without errors

Hello, now I am here to answer the above questions for you. How to load the CAD2014 Yanxiu toolbox, CAD2014 Yanxiu Toolbox**I believe that many friends still don't know, now let's take a look. <>

Hello, now I am here to answer the above questions for you. How to load the CAD2014 Yanxiu toolbox, CAD2014 Yanxiu Toolbox**I believe that many friends still don't know, now let's take a look.

1、Directly**Install can be clicked** Yanxiu Toolbox 2014 Yanxiu Toolbox 2014 Installation Tutorial This program is an AutoCAD plastic mold enhancement plug-in, you need to install AutoCAD2004 and above versions to run this program2, please close AutoCAD3 before installation, you can directly overwrite the installation, no need to delete the old version, note that the new version should be installed in the same directory as the old version 4, execute the installer file (Yanxiu Mold Follow the prompts.

2. It can be automatically loaded into AutoCAD5, if the dialog box (file name, directory name or disk label syntax error) appears, it is because the installation file (the name of the directory where Yanxiu Mold is located is Chinese.

3. Please change the name of the directory where the installation file is located to a letter.

Yanxiu toolbox is a very easy to use plug-in for mold 2D drawings in the past, but in the era of 3D popularization, although 2D is gradually going to withdraw from the background, there will still be CAD engineers to use, so do you know how to manually install Yanxiu in CAD2010? The following is my cad2010 how to manually install Yanxiu's method, I hope to give you an answer.

CAD2010 method of manually installing YanxiuFirst of all, unzip the Yanxiu toolbox, open it and install it.

CAD2010 manual installation of Yanxiu step 1Then click on AutoCAD2008

CAD2010 manual installation Yanxiu step 2Go to the CAD page and click Tools in the menu bar.

CAD2010 manual installation Yanxiu step 3Click Load Application in the tool.

CAD2010 manual installation Yanxiu step 4Then, find the installed Yanxiu toolbox and load it.

CAD2010 manual installation Yanxiu step 5Finally, the Yanxiu toolbox appears on the CAD page.

CAD2010 manual installation Yanxiu step 6

Troubled We know that Yanxiu is an auxiliary tool used in CAD drawing, because Wang Shudan tool has many functions, so many students will use it. So do you know how to load Yanxiu in CAD2012? The following is my cad2012 how to load Yanxiu's method, I hope to give you an answer.

CAD2012 loading Yanxiu method 11. Yanxiu tool is a plug-in in VLX format, and AutoCAD supports VLX format.

2. Click Tools and select Load Application.

3. Find Yanxiu's VLX format file, select it, and then click Load.

CAD2012 Loading Yanxiu Method 2 First of all, unzip the Yanxiu toolbox, open and install it.

Then click on AutoCAD2008

Go to the CAD page and click Tools in the menu bar.

Click Load Application in the tool.

Then, find the installed Yanxiu toolbox and load it.

Finally, the Yanxiu toolbox appears on the CAD page.

CAD2008 installation Yanxiu toolbox installation directory can not write permissions,Unable to run,This is because the CAD software crashes caused by the installation of the toolbox that does not meet the version,Need to reinstall the software to solve,The specific operation steps are as follows:

1. First launch the CAD installer, and then click Install in the lower right corner

<>3. Fill in the installation path of the software

4. Then, the CAD software will start to be installed automatically

5. After the installation is completed, you can use the software normally without errors

Go to the 32-bit system where the Yanxiu toolbox is installed, copy it into the directory of the Yanxiu toolbox you have installed, and then open CAD2008 to load the file.

auto2008 loading swallow method:

1.Copy from the installation folder to the program installation directory (it is copied from the installation folder of Yanxiu Toolbox to the directory where the Yanxiu program is installed, for example, your installation file is in the E drive, and the Yanxiu software is installed in the C disk or D drive, then copy it from the E disk to the C disk or D disk installation directory);

2.Find Autolisp under Tools in CAD and select Load Application to find Load in the installation directory;

3.Just enter after the cursor!

Yanxiu only supports until 2012, but it can be, and it's more troublesome.

Here's how, in addition to 2013, install one more CAD from 2012 or earlier.

Install Yanxiu to 2012 or earlier versions of CAD.

In the Start Menu CAD directory, there is a "Migrate Custom Settings" with "Migrate from an earlier version", click on it. Follow the prompts to do it later. After the transplant is completed, open 2013, the workspace is changed to the transplanted, and Yanxiu has it.

Mine is 2014, 2013 I also used, the same method, you can do it.

Summary. Why can't it be used, is it a "unknown command" prompt when you click on the command? If you manually use the "ap" command to load the program under Yanxiu's installation directory",If it can't be useful,Search for it" These two files,If there is,,Then it's in the lisp virus,This virus will block the lisp extension,Don't let it load and use。

Why can't the Yanxiu toolbox hanging in CAD2006 be used? There is a column of Yanxiu toolbox on the toolbar, but it can't be used.

Why can't it be used, is it a "unknown command" prompt when you click on the command? If you manually use the "ap" command to load the program under Yanxiu's installation directory",If it can't be useful,Search for it" These two files,If there is,,Then it's in the lisp virus,This virus will block the lisp extension,Don't let it load and use。

My CAD Yanxiu is installed, but I can't see Yanxiu's plug-in command in the CAD interface.

Tool Load Application Find the file in your Yanxiu toolbox and load it and close it.,When you install it, you must select the version.,The version selected is not right, and you can't load it normally.,You also have to have administrator privileges to install.,Use.。

Which one is this one to choose?

Then look for it again.

Close and try.