What can I wear for a long time Bluetooth headset I listened to it and ran out of power in the morni

A morning is about a few hours. It is normal for the general Bluetooth headset to last for half a day, that is, about 5 hours. Some write battery life is ten hours or more of battery life with charging case, and I haven't seen it for the time being, and there may be more than 6 hours.

It is normal for Bluetooth headsets to listen to a morning without power, in fact, it is recommended not to wear the headphones for too long, no matter how good the design is, wearing it for a long time will have an impact; If you want to wear it longer, you have to choose a headset with a longer battery life, I have used my colleague's magic wave O5 before, and athletes use it to run a full marathon, the headset has a single battery life of 7 hours, and the battery compartment is 100 hours together.

Bluetooth headphones can only listen for half an hour, it should be that there is a problem with the battery of the Bluetooth headset. You can go check it out. Otherwise, in order to save trouble, simply change one.

The solution is to listen unilaterally, the other is charging, and the other way, just, two sets, always backup power, but it is not recommended to hurt the ears.

In this case, the other earbud may not be charged, or the other earbud may have a problem and is faulty.

Taking Apple earphones as an example, when one of its Bluetooth headphones is powered and one is out of power, you can take out the powered earphones from the earphone case, plug the dead ones inside, and wait for the indicator light to display, which means that it has entered the charging mode.

The Bluetooth headset is not plugged into the charger.

1. The indicator light is off, indicating that the machine has been turned off.

2. The indicator light is always on, indicating that it has entered pairing mode.

3. The indicator flashes 5 times rapidly, indicating that the pairing is successful.

4. The indicator flashes rapidly once every 3 seconds, indicating that it is in standby mode.

5. The indicator flashes slowly once every 8 seconds, indicating that it is in the call state.

Precautions for use: When the earbuds are about to run out of power, there will be 5 short sounds every 20 seconds to prompt.

One Bluetooth headset is fully charged and one is out of power, it may be that the charger is in poor contact, or it may be that the battery of the dead battery is broken and cannot be charged.

In this case, either the charging compartment of your Bluetooth headset is not charged, or the battery of the Bluetooth headset has been faulty and there is no power, so it will lead to this situation.

It is possible that the charging compartment is out of power, and then you keep using one-sided earphones, one is out of power, and the other is still fully charged.

This kind of problem may be a quality problem with Bluetooth headsets, mine is also the left ear often out of power and the right ear is fully charged, the quality of the second-generation AirPods is a little poor.

Two reasons. One of the earphones doesn't touch well and can't be charged'

One of the earbuds has a failed battery and cannot be charged.

It may be that the charger of the other one is broken, or the earphones are broken and cannot be charged.

In fact, Bluetooth is very power-hungry, and the 848 itself is very weak in standby, so it is recommended to change to a larger battery.

1. If the newly bought Bluetooth headset has not been charged by itself, it is normal for there to be no sound after listening to the song for a while.

2. Because the newly bought Bluetooth headset will have a little power in it, it is used to test the call effect.

3. If it is a new Bluetooth headset that is fully charged by yourself, and the battery runs out after listening to the song for a while, it means that the battery of this Bluetooth headset is not good.

4. Generally, a fully charged Bluetooth headset can last 7-8 hours of talking, 5-6 hours of listening to songs, and about 9-10 days of standby.

Hello, the reason why the bluetooth headset is fully charged but runs out of power soon is: the bluetooth headset is old, or the battery is leaking. Bluetooth headset is the application of Bluetooth technology to hands-free headphones, so that users can avoid the stumbling of annoying wires, and feel comfortable to talk easily in various ways.

Since the advent of Bluetooth headsets, it has been a good tool for mobile business people to improve efficiency. Bluetooth is a low-cost, high-capacity, short-range wireless communication specification. A Bluetooth laptop is a laptop with Bluetooth wireless communication function.

Extended information: An important decision for Bluetooth headsets is the transmission distance, which is not related to the Bluetooth version, but depends on the Bluetooth technology PowerClass. Most mobile phones and mobile devices use PowerClass2, with a standard transmission distance of 10 meters; The upgraded PowerClass 1 increases the transmission distance to 100 meters, and both versions support the A2DP stereo transmission protocol, which can be interconnected with stereo headphones.

According to the actual use feeling, the distance between the mobile phone and the Bluetooth headset is directly proportional to the call noise; In addition, when using stereo Bluetooth headphones to enjoy**, do not stay too far away from the mobile phone, otherwise it is easy to intermittent. Generally speaking, the distance between the mobile phone and the Bluetooth headset will not be too far, if there is no big obstacle in the middle, the transmission quality is very good within 7 meters, and there will be a breakpoint if it exceeds 8 meters! More than 10 meters between Bluetooth devices will lose connection.

Summary. With Bluetooth headsets, the mobile phone consumes power, and if it is only in the standby state when the connection is turned on and not in use, the power consumption is not large. When connected to a Bluetooth headset and started using it, its power consumption is roughly twice that of ordinary wired headphones.

With Bluetooth headsets, the mobile phone consumes power, and if it is only in the standby state when the connection is turned on and not in use, the power consumption is not large. When connected to a Bluetooth headset and started using it, its power consumption is roughly twice that of ordinary wired headphones.

With Bluetooth headphones, the phone is battery hungry. However, it needs to be divided into two situations: standby and Bluetooth use. The mobile phone is on normal standby with Bluetooth standby, and the power consumption does not increase much, and only when the Bluetooth device is connected will it affect the power consumption of the mobile phone;

Summary. The reasons and solutions for Bluetooth headphones showing a full charge and a dead power are as follows: the earbuds may not be charged, put the earbuds into the charging case to charge, can not be charged, it may be that the power of the charging box is also exhausted, you can connect the charging cable to charge, when the earbuds are out of power, it is generally a prompt sound, it is recommended to charge in time, so as not to affect the use experience. Headset Tips:

1. There are many reasons why the Bluetooth headset has no sound, it may be that the headset and the mobile phone are disconnected, you can try to pair it again; It could be that the headphones are damaged; Need to contact after-sales maintenance; It is possible that the device is running out of power and needs to be recharged; It may be that the system volume of the mobile phone is set to 0, and the volume can be turned up to solve the problem; It may be that the phone is far away from the headset and cannot transmit the signal. 2. The computer can be connected to the Bluetooth headset, turn on the computer, enter the win10 settings page, turn on the Bluetooth function, and then pair it with the headset. 3. The sound quality of the headset call is not clear, it may be that the microphone is blocked, and it can be cleaned up before use.

The reasons and solutions for Bluetooth headsets to display a full charge and a lack of power are as follows: the earphones may not be charged, put the earphones into the charging case to charge, can not be charged, it may be that the power of the charging box is also exhausted, you can connect the charging cable to charge, when the ear volt bumps the machine and there is no lack of electricity, it will generally send out a prompt sound, it is recommended to charge it in time, so as not to affect the use experience. Tips for using headphones: 1. There are many reasons why the Bluetooth headset has no sound, it may be that the headset and the phone are disconnected, you can try to pair it again; It could be that the headphones are damaged; Need to contact after-sales maintenance; It is possible that the device is running out of power and needs to be recharged; It may be that the system volume of the mobile phone is set to 0, and the volume can be turned up to solve the problem; It may be that the phone is far away from the headset and cannot transmit the signal.

2. The computer can be connected to the Bluetooth headset, turn on the computer, enter the win10 settings page, turn on the Bluetooth function, and then pair the headset with the headset. 3. The sound quality of the headset call is not clear, it may be that the microphone is blocked, and it can be cleaned up before use.

Reasons and solutions: 1. In this case, the battery of the Bluetooth headset should be damaged; 2. Go to the after-sales outlets of the Bluetooth headset brand for testing, or replace the battery with a new one; 3. During use, try to protect the battery to avoid damage to the battery;

It's just bad to scold the customer service.