If the water pipe valve is leaking, what should I do if the water pipe valve is leaking

If there is a leak at the connection between the household valve and the pipe, wrap more self-adhesive tape at the connection, and wrap it in a counterclockwise direction, so that it will be tightened more and more tightly when connecting the valve. If the valve itself is leaking, then the valve needs to be disassembled and added to the seal or O-ring. If it still doesn't work, it's best to replace one.

If it is an industrial valve leakage, if it is not the valve itself is leaking, then the valve and the pipeline connection should be added to the sealing ring, if the valve itself is leaking, it is to return to the manufacturer for maintenance, if it is inconvenient, then only ask the manufacturer to come for maintenance.

What a naïve child! If the housing management office asks you for trouble, of course you have to say that you don't know! You've never moved!

He didn't record again, what are you afraid of! Such an old house, the total valve can be opened and closed is already quite good, can not switch more goes, even if it can be opened, open, close once the possibility of water leakage is almost 100, the housing management office it also knows this situation, will not find you fault. What the maintenance worker said is also from experience, not from you, it will be better after a long time.

In short, your worries are completely unnecessary.

Yes, it's none of your business, don't be single-minded, because that's what I do. It is caused by time.

Don't think about it, it's normal.

You have to know that water companies can't just take money and don't care about repairs. Repairs like this should have been replaced a long time ago.

Put 10,000 hearts.

If the housing management office wants to trouble you, I won't live!

Dear, good! It's a pleasure to serve you. What should I do if the water pipe valve is leaking?

Pro, household valves: leaking water at the connection with the pipeline, wrapping sticker tape around the connection, the valve itself is leaking, disassemble the valve and add the sealing ring inside. If it doesn't work, replace one.

Industrial valves: It is not the valve itself that leaks, the connection is added to the sealing ring, and the valve itself is leaking, so that the manufacturer can repair it. Second, how to install the valve Valve installation first cut the pipeline along the vertical direction, and trimmed, remove the burr, and measure the pipe diameter.

Use gauze or a wire brush to remove pipes and cuts to make their metal surfaces shine. It is not advisable to use steel wool. 1. Apply flux on the outside of the pipe and the inside of the welding cover, and the flux must completely cover the welding surface, and use the flux sparingly.

2. Make sure the valve is open. Heat the pipes first. Transfer as much heat as possible from the pipe to the valve.

Avoid prolonging the heating time of the valve itself. 3. Silver brazing method: assemble the parts that need to be brazed.

If the flux-coated part is allowed to stand upright, the moisture in the flux will evaporate, and the dry flux will easily fall off, causing the exposed metal surface to be easily oxidized. 4. When connecting and assembling, the pipe should be inserted into the pipe sleeve until it encounters an obstruction. The assembly is to ensure that there is a stable support that can be maintained in a straight position throughout the brazing operation.

In our daily lives, water is indispensable for both laundry and cooking. It is also very common for water leaks in the home due to the passage of time and the lack of maintenance awareness, so don't be nervous at this time. Check that if the water pipe is not broken, it should be caused by a loose water pipe valve.

In view of the problem of water pipe valve leakage, we will bring you a set of solutions.

1. What should I do if the water pipe valve is leaking?

1. Turn off the main valve of the water inlet pipe first.

2. Prepare self-adhesive tape and wrench.

3. Loosen the connection between the valve and the pipeline clockwise with a wrench, and then dry the connection with a towel. Use some more self-adhesive tape to wrap the newly wiped connector in a counterclockwise direction.

4. When maintenance, use a wrench to rotate in the counterclockwise direction, and tighten the valve as tightly as possible.

5. Open the main valve of water inlet and observe whether there is any water leakage. If it is a leak from the valve itself, it is recommended to replace it with a new one.

Second, the maintenance of water pipe valves.

1. Don't always close the valve and wheel Li door, there is a gasket in the valve mess. If the valve gasket is opened and closed frequently, it will wear out and become thinner, and the valve itself will leak.

2. Always check whether the valve interface is loose by hand.

3. Do not press too the valve regardless of opening and valve, it is best to leave a little space up and down.

3. The impact of water leakage.

It's okay to have someone at home when there is a water leak, but it's a problem if there is no one at home. A large amount of water leakage will not only cause damage to the living equipment at home due to soaking, but also make it difficult to clean up later. Therefore, we should usually do regular testing of the water pipe valve at home to avoid economic losses.

Fourth, maintenance precautions.

After all, repair is a technical job, if you are not confident in yourself and cannot ensure that the repair can be successful, then ask a professional to deal with it. Do not blindly twist the valve in a rough way, it will easily lead to damage to the valve.

The above summary is not compiled, and it is only suitable for home valve leakage repair. If it is a valve leakage in an industrial or large enterprise, you should call a professional meditation service**, and you should not operate it at will to cause greater losses.

<>1. If there is water leakage at the connection between the household valve and the pipeline, you can wrap a little more self-adhesive tape around the connection, and wrap it in the counterclockwise direction when winding, so that the valve will be tightened more and more tightly when connected. If the valve itself is leaking, you can disassemble the valve and add a seal or O-ring inside. If it still doesn't work, it's best to replace it.

2. If the industrial valve leaks, if it is not the valve itself is leaking, then the valve and the pipeline connection can add some sealing rings, if the valve itself is leaking, it is recommended to return to the factory for maintenance, if it is inconvenient, you can also contact the manufacturer for door-to-door maintenance.

If there is a leak at the connection between the household valve and the pipe, you can wrap more self-adhesive tape around the connection; If the valve itself is leaking, then the valve should be disassembled and added to the seal or O-ring, but it is recommended to replace one more conveniently. If the industrial valve leaks, you can add a sealing ring to the connection between the valve and the pipeline, or find a manufacturer to repair it.

What are the commonly used water pipes.

1. PP-R pipe.

PP-R pipe is non-toxic, light weight, corrosion-resistant, smooth inner wall of pipe, and high temperature resistant. This kind of water pipe can not only be used as a cold water pipe, but also can be used as a hot water pipe, in the connection is the use of hot melt technology, pipes and pipe fittings in the hot melt connection, can make the two completely form a whole, the connection of the jujube transport qualified its life and pipe.

2. Copper pipe. The copper pipe is not easy to corrode, the performance is relatively stable, and the service life is long, and the copper pipe connection method has two types: crimping and welding. The crimping is sealed with O-rings, which will have the problem of aging and water leakage after long-term use, and the metal solder is melted by high temperature such as acetylene welding, and then filled into the gap of the joint, which is reliable and has a long service life.

3. Galvanized pipe.

The service life of galvanized pipes is short, and a large amount of rust will be produced in the pipe after a long time, and the "yellow water" that often flows out of the faucet is formed after iron corrosion.

4. PVC pipe.

PVC pipes need to be glued when they are connected, and the frost resistance and heat resistance of water pipes of this material are not good, so they are generally not used as hot water pipes, and are mainly used for wire pipes and sewage pipes.

5. Stainless steel pipe.

Stainless steel pipes are safe and reliable to use, but the welding requirements and costs are relatively high, and household use is usually crimped, which requires O-rings for sealing.

Summary: The above Mo Yanhong is about how to repair the leakage of the water pipe valve, I believe everyone understands it! Water pipe valve leakage should be treated according to the specific cause, so it is necessary to find out the cause of water leakage before treatment.