What to do if the sewage pipe is leaking, and how to deal with the leakage of the water pipe

1. The water leakage caused by cracks on the outside of the cement pipeline is generally caused by the long-term aging of the pipeline. If the pipe wants to be temporarily repaired, it can be repaired with cement and then wrapped in a layer of adhesive tape. After the cement has set, the tape can be removed.

If there is a leak, if the leakage is light, it can be wrapped or coated with cement mortar. If the joint is leaking severely, the original packing should be removed and the asbestos cement joint should be remade.

2. If the pipe has a sand hole, a small conical wooden plug can be driven into the sand hole.

3. If there is a small crack in the pipeline, it can be wrapped with rubber, and the outside is clamped with a pipe clamp, of course, once the seam is too large, we can only replace it with a new pipe.

4. If there is a small range of water leakage in many places of the cement pipe, make a sealant around the drainage pipe, so that the water will not come in and will not leak out. or filling the drain with a flexible waterproofing agent, or gypsum water – the material is cheap and readily available; Polyurethane foam or sealant is used around the perimeter, and finally water-resistant putty or cement slurry is used at the treatment site, and then the perimeter is sealed with a cleaning tool. However, if the leakage is serious, it is recommended to replace the pipe with a new one.

Put sealant around the drain pipe, water can't get in, and naturally it won't seep out. Or you can fill the perimeter of the drainage pipe with a flexible waterproofing agent, or you can use gypsum water to fill it - the material is cheap and easy to obtain; Use polyurethane styrofoam or sealant to hit the surrounding, and finally treat it with water-resistant putty or cement slurry at the treatment position, and then press the sanitary ware and apply sealant around it.

Kiss! Hello, happy to answer your <>

How to deal with leakage of hydrophilic pipes is as follows: The best way to deal with leakage of toilet sewer pipes is to apply glass glue to the location of the broken water pipe and the surrounding locations.

Then don't rush to use water first, wait for the glass glue to bond the leaky place tightly before using water. Basically, wait one night, and the next day you should be able to test the water to see if there is any leakage. Check the drain pipes in the kitchen to find out if there is a water leak.

If it is because the interface to the sink is loose, tighten it. You can also wrap an adhesive-coated cloth tape around the interface of the sink, and then do not drain it, and wait until the next day, if the water is still leaking and the water pipe is not broken, it is caused by the aging of the water pipe, and a new water pipe needs to be replaced. If the water pipe joint leaks, the interface must be broken, and it is difficult to have an effect with ordinary repair methods, even if it is forcibly wrapped with a few circles of adhesive tape, it is only a symptom but not a cure, and it will leak again after a few days.

Therefore, at this time, it is more appropriate for us to change to a new interface. Generally speaking, it is relatively simple to install the water pipe interface and can be operated by yourself. The only thing we need to pay attention to is that when installing, the rubber pad inside must be wrapped tightly, and some tapes with good toughness can be wrapped several times to avoid secondary water leakage.

The leakage of plastic sewer pipes is still very easy to solve, and you can repair it by buying a plastic water pipe of about the same size. First, cut off the previous leaking section, then connect the newly purchased sewer joint with the old water pipe connection, or wrap the new water pipe connection around the old water pipe connection, and then apply a layer of glue on the outer layer of the joint and wrap it with a watertight raw meal tape. Hope mine can help you <>

Do you have any other questions?

If you have a PVC water pipe, you can go to the supermarket or hardware store to buy a PVC water pipe to connect. The specific operation method is: first cut off the broken stool water pipe, and then put the interface to one end of the water pipe, and then bend the bush to bury the cut position at the other end and the mouth of the interface can be level.

In addition, if the sewer pipe is leaking, we can also buy waterproof tape to solve the problem.

If the PVC pipe is leaking, you can buy a new PVC pipe, replace the broken part in several rows, and fix it with PVC glue; Buy waterproof tape, wrap the sewer pipe, and then use mortar anti-reed and cement to wipe the outside of the waterproof adhesive; If you can't handle it yourself, find a professional master to help you repair it to avoid major problems.

Second, what to do if the pipe is leaking.

1. When installing the pipe, you need to pay special attention to the water pipe, be sure to install the water pipe, and the material should not be too problematic. This means that the quality of the purchased water pipes must be good, based on the brand, and the guarantee of the hall is higher, and you must not be greedy for cheap.

2. After the water pipe leaks, it is necessary to see whether there is a problem in the position of the water pipe connection, if the connection is not stable, it needs to be reconnected, and the raw material or professional glue is fixed, so as to avoid the problem of connection again in the later stage.

3. If the pipe leakage is not a connection problem, you need to consider whether the water pipe is a problem, if there is a problem with the water pipe, you need to replace a new water pipe. Generally speaking, as long as there is no problem with the connection and the water pipe itself, there will be no water leakage.

4. If the individual is not good at repairing the leakage problem of the pipeline, then it should not be repaired at will, so as not to cause the problem to become bigger and bigger. It's best to have a professional inspect and repair it, but you need to pay a fee.

What to do if the pipe leaks, and what to do if the pipe leaks, I will introduce it here, do you understand? Leaking pipes is very troublesome, and it is necessary to find the specific cause and then proceed with the correct treatment.

1. If it is a PVC water pipe, you can buy a water pipe to reconnect, first cut off the leaking pipe, put the interface into one end of the pipe first, so that the other end is flush with the interface, so that it can be straightened, and then apply glue to the inside of the two ends and the outside of the two sewer pipes. 2. You can buy waterproof leakage beam tape to repair the sewer pipe, wrap it up, and then wipe it with mortar waterproofing agent and cement.

Why do water pipes leak.

1) The welding is not compact.

The most direct reason for the leakage of water pipes at home is that the joints are not firmly connected, like hot-melt plastic pipes, the hot-melt temperature cannot be reached, the hot-melt time is not enough, and the hot-melt socket depth is too shallow, which will lead to virtual welding. After a period of use, the joint will leak, and for example, when the stainless steel pipe is threaded with the inner wire pipe fittings, the number of turns wound by the raw material belt is too small or there is no raw material belt, and it is easy to leak during the use of the water pipe.

2) A burst water pipe.

There are two reasons for the burst of the water pipe, first, the water pipe itself has a hidden hole, even under the normal working pressure, it will rupture in a large area in a short time, and the water gushes out of the crack, which is the phenomenon of the water pipe bursting that we often see. The second reason is that the quality of the pipe is not good and the pressure is not enough. The home has just been renovated, and I have no intention of turning the faucet to the maximum instantly, resulting in water hammer.

If the quality of the water pipe is not good, it is easy to burst instantaneously or even burst.

3) Man-made sabotage.

If there are children in the family who like to sabotage, a section of the water pipe is suppressed and hit by the bear child many times, and after a period of time, there will be a breach, resulting in a burst.

4) Excessive pressure.

It is also a common occurrence that excessive pressure leads to a pipe burst. One possibility is that you unintentionally pressed a heavy object on top of the pipe, and after some time, the pipe burst. Another situation is that the pressure coefficient of the water pipe is not well chosen.

The higher the floor, the smaller the pressure of the water pipe, and the water pipe on the first floor has the largest pressure, so it is necessary to choose the corresponding pressure-resistant water pipe according to the floor.

I believe that many friends have encountered water leakage in the bathroom, kitchen, etc., whether it is their own house leakage, or by someone else's house leakage, it must be very depressed, annoyed, and then there is no way, only pry open the floor tiles, redo the waterproof treatment, if you encounter this is not good, then it is necessary to carry out a large project, and it is time-consuming and costly, and it may not be able to completely solve the leakage of sewage pipes. So we need to really find out the cause of the leakage of the sewage pipe and how to deal with it!

The reasons for water seepage in this pipe are as follows:

1 It is possible that the temperature of the spray gun is too high or too low during hot melt welding of the interface section.

2 The pipe was smashed during backfilling.

3 When possible, the brick-built inspection well wall seeps water. Remember, when doing the closed water test, it must be left for at least 24 or 48 hours after filling it to observe whether the water is leaking, otherwise the water absorbed by the brick and lead spring dry inspection well will cause the change of water level to be mistaken for water leakage.

So now there are many reasons that lead to leaking sewers. Now we are asked to choose Huaidong to use penetrating waterproofing agent to solve some small problems in life.

Tools Raw materials.

Penetrating water repellent agent.

Dosage: tile surface and joints can be brushed about 10 square meters;

Color: colorless and transparent;

Uses: Large-area overall painting to achieve the overall waterproof effect;

Construction method: The appearance is the same as water, and it can be sprayed directly with the packaging matching nozzle or brushed with a brush.

Plastic steel mud (third generation).

Dosage: Toilets and kitchens can be constructed for about 30-40 meters with waterproof edges. According to the width of the edge line, the dosage is slightly different;

Color: White, Gray, Yellow, Black (default white);

Usage: Edge banding. Make the corners, wall roots, pipe roots and other positions permanently waterproof;

Construction method: AB mixed and used. The appearance is like clay, and when used, it is rolled into a thin strip and pressed to the construction site.

Waterproof paste. Dosage: 10 square meters (200*300 square bricks) box, 20 square meters (300*600 square bricks) box;

Color: White;

Uses: special for caulking, repairing gaps, defects, etc.;

Construction method: The appearance is the same as toothpaste, and it can be compacted and smoothed with fingers or scrapers directly filled into the empty gaps.

Experience: Precautions. After the operation, wash thoroughly with water to avoid leaving your hands behind.

If you are hanging heavy objects or high pressure (water pressure), please delay the use to ensure the effect.

If there is oil or dirt on the bonding surface, clean it up, otherwise the effect will be affected.

After the operation, wash thoroughly with water to avoid leaving your hands behind.

If you have allergies**, please wear gloves.

There are many reasons why a leaky sewer can occur. Different places have different ways to deal with them. Sometimes the above method can be used for small areas such as our room, bathroom, kitchen, etc.

Perhaps a serious sewer leak will not be able to use this method. You'll have to go to the construction team to deal with it. If it is a leaking sewage pipe in a public place, it is more important to find a construction worker.

Because the underground connection of public places is close, it is not easy for private people to deal with it!

You can get it for free

1.Close the main line valve: The first thing to do is to close the main line valve to prevent the water from continuing to flow out. The main pipe valve is generally located at the water meter of the home, which can prevent the water from continuing to flow out after being closed, further reducing the loss.

2.Find the leakage: Finding the leak is the premise of repairing, so you need to carefully observe the leakage point of the water pipe. Generally, there are water traces at the collapse point of the leakage scale, and there may also be water vapor or sound.

3.Repair leaks: If the thickness of the water pipe wall is less than 10 mm, it can be repaired with waterproof glue or rubber glue. If the thickness of the water pipe wall is more than 10 mm, it needs to be repaired with solder.

4.Check the water pipe bus: Check the water pipe bus to prevent other leaks. You can touch the water pipe with your hands to see if there are serious bubbles or deformations.

5.If the water pipe leakage is serious and it is difficult to solve or repair it by itself, it should be repaired in time to avoid further losses.

Leaking water pipe joints: If the connector is broken and leaking, it needs to be replaced. Leaking sewer pipes:

If it is a PVC water pipe, buy a new one and connect it yourself, first cut off the cavity liquid of the broken buried mold root pipe, and put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface. Leaking iron pipes: If there is a problem with the connector, replace the fitting part.

If there is a water leakage in the pipe body, wear off the rust stains of the original pipe body, and then repair it by welding.

First of all, we must understand the type of water pipe, whether it is an iron pipe or a plastic water pipe, and the degree of water pipe leakage: some water pipes are only slightly leaking, some are a large amount of water seepage, sometimes it is a water pipe joint leakage, and the common different types of water pipe leakage are as follows:

1. Cause of water pipe joint leakage: This situation is generally relatively slight, and it is not difficult to solve, which is due to the fact that the water pipe and the faucet are not well connected.

2. Causes of sewer pipe leakage: water pipe hardening or long-term foreign body blocking the water pipe resulting in rupture.

3. The cause of water leakage of iron pipes: The general situation of iron pipes is that the water pipes are not replaced in time due to long-term dripping, resulting in rust and corrosion of water pipes.

4. Causes of leakage of plastic water pipes: water pipes are hardened or foreign objects block the water pipes for a long time, resulting in rupture.