hp CQ511 How to redo the system detailed steps .

It's a business machine! If you install the system, you must use the DM partition method low-level hard disk, if you don't have a low-level business jet with a Linux system, the built-in system is not clean, you can't install the system, and the system is also blue screen or not in the system. The second is that you have to go to BIOSS to set the hard disk options.

Click the F10 key to enter the BIOS setup process. Use the arrow keys to select Device Configurations under the System Configuration menu in the main menu and hit Enter, then use the arrow keys to move the cursor over the SATA Native Mode option. Use the left and right arrow keys to change the value of the SATA Native Mode option from enabled to disabled.

Click F10 to save the settings, select the "yes" option and hit enter to confirm the change to the IDE option. Press F10 to save. There is absolutely no problem with reinstalling the system!

Go in and sign up and reply once to buy**! These 2 are very important for you to change the system of HP Business Jet! And your ghost disk must be the latest version or it can't recognize the hard disk! This machine doesn't need to brush bioss ha!

For the installation process of win7, you can refer to Microsoft's official documentation.

We hope you find the above reply helpful.

Put it into the system disk --- boot --- reboot --- press the F12 --- optical drive to boot the first --- and install it to the first partition.

Your machine is currently using a Linux system, and if you want to install the XP system, you need to delete the Linux partition (because the XP system does not recognize the partition format of the Linux system). There are two methods: first, you must back up all the important data on the disk to a storage device other than the computer (such as an external portable hard disk), and when the HP (or Compaq) interface appears at boot (or restart), keep clicking F10 to enter the BIOS, and select the disk under the Security option

Sanitizer (Disk Wipe), please note: all data on the hard disk will be lost after using this function, run Disk

When the Sanitizer is about to be progressed, click ESC to cancel the operation, and then use the clean version of the XP disc to partition and install. You can try to use a third-party partitioning tool like DM to remove the Linux partition and use the pure version of the XP disc for partition installation.

We hope you find the above reply helpful.

1) The volume icon of the system tray does not appear when it starts up (the computer has sound, if there is no sound, please reinstall the sound card driver).

1. Open the Control Panel Sound, Language, and Audio Devices Sound & Audio Devices Volume Tick "Put the volume icon into the taskbar" and press Apply to OK.

2. If the fault persists, please press Start Run and enter regedit enter to open the registry, and then [hkey local machine software microsoft windows current

version run], right-click the right pane to create a new string, add "sndvol32" to the new value, and double-click the "sndvol32" key value, whose value is c: windows system32 system32

sndvol32

Then press OK to restart the PC and let Windows

Automatically loads sndvol32 on xp startup

program to minimize loss".

If just the taskbar doesn't have icons, pass you a taskbar repair applet which has an option "Program Minimize Loss" that you choose to repair on it.

If the fault persists, it is recommended to check and kill the Trojan horse and repair the system.

1. Please use the system restoration that comes with the system to restore it to the time when you do not have this failure (or use the restoration software to restore the system).

2. If the fault persists, use the system disk to fix it, open the command prompt and enter sfc

scannow

Press enter (there is a space between SFC and ), insert the original system disk to repair the system, and the system will automatically compare the repaired one.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.

Use the system that comes with the system restore method:

The system comes with System Restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore.

Appendix: Reinstallation of the system method. docx

There is a wake-up function in the network card.,If you cancel it, it won't restart.。

You unplug the network cable and then turn it off.