What does static mean, what does static management mean

A static route is a route that is manually configured by the network administrator. When the topology of the network or the status of the link changes, the network administrator needs to manually modify the static route information in the route table. Static routing information is private by default and is not passed on to other routers.

Of course, the webmaster can also set the router to be shared. Static routes are generally suitable for simple network environments, where network administrators can easily understand the topology of the network and set the correct routing information. Here are two examples of good candidates for static routing.

In Figure 1, assuming that a network other than Network 1 must pass through Router A and Router B to access Network 1, the NMS can set a static route to Router B in Router A. The advantage of this is that the amount of data transferred on the WAN link between Router A and Router B can be reduced, because there is no need for the exchange of routing information between Router A and Router B after the network uses static routes. In a network that supports dial-on-demand routing (DDR), dial-up links are dialed up only when needed, so they cannot provide changes in routing information to dynamic routing tables.

In this case, the network is also suitable for static routing. Another benefit of using static routes is the high level of network security confidentiality. Dynamic routing requires routers to frequently exchange their routing tables, and the analysis of routing tables can reveal information such as network topology and network addresses.

Therefore, the network can also use static routing for security reasons. Static routing is often not appropriate for large and complex network environments. On the one hand, it is difficult for network administrators to fully understand the topology of the entire network. On the other hand, when the topology and link state of the network change, the static routing information in the router needs to be adjusted on a large scale, which is very difficult and complex.

Resources.

Static system: The system is not a simple rule provision, the rule provisions are rigid and static, and the system has an effect on people's behavior, dynamic, and flexible operation, often changing. It is the executive power that transforms the rules and regulations from static to dynamic, gives them agency, enables them to realize their binding role in the implementation, proves their ability to regulate and regulate, and thus can be complied with by people, so that it truly becomes a system.

System: System generally refers to the rules of affairs or code of conduct that everyone is required to abide by, and also refers to the norms or certain specifications such as laws and regulations, customs and other norms formed under certain historical conditions. In different industries, different departments, and different positions have their specific work guidelines, and the purpose is to make the work as planned and required to achieve the expected goals.

Static managementIt refers to the suspension of all kinds of leisureEntertainment venuesactivities, suspend business activities that are not necessary for production and life, government agencies and institutions work from home, suspend related gathering activities, and strengthen the control of pharmacies and clinics.

Static management is not absolute, and the general public can report to the community where they live if they have special needs such as medical treatment, and can only go out after the community asks the higher authorities.

The basic characteristics of static management

1. "All businesses will be closed".

First, in addition to the personnel involved in the epidemic prevention work, all administrative institutions in the city.

All staff work from home; Except for the key enterprises identified by the city and the public service enterprises that protect people's livelihood, all business establishments will be suspended; Except for qualified supermarkets, pharmacies, medical institutions, etc., all other businesses will be suspended; Taxis and ride-hailing services will be suspended. To put it simply, all three are "all closed".

2. "Don't gather, don't flow, don't go out".

Second, the city's communities (villages) and units implement closed management, and residents do not gather, move, or go out. To put it simply, there are three "nos". In other words, the three "all closures" and the three "nos" are static management.

Note: The static management measures implemented in each city may be adjusted according to the actual situation, please refer to the official specific notice.

The above content reference: Encyclopedia - Static Management.

Static management is actually a stricter epidemic prevention and control, and there will be no lockdown, but a certain closure and control area will be set up, so that people in this area can't go out. It may be that there are multiple confirmed cases in this area, and people in the area also need to undergo multiple nucleic acid tests in order to achieve dynamic zero. Static management is a little better than engineering management, and it allows the rest to work normally without affecting most people's lives.

I believe that many people have experienced nucleic acid testing and know the terrible nature of the epidemic, so many regions attach great importance to the epidemic or carry out static management. Static management and dynamic management are corresponding, and dynamic management shows that this region is laissez-faire and does not pay much attention to epidemic prevention and control. The static management shows that the flow of people in this area is relatively infrequent, do not go out unless necessary, do not go out of the province unless necessary, or do not gather unless necessary.

When entering and leaving the community, it is necessary to take a temperature measurement, and if someone in the community comes back from other places, it is also necessary to report and conduct nucleic acid testing in the later stage. In some places, there will be separate lockdown management areas, so that people in this area cannot enter and exit casually. The reason is what is said above, after all, to ensure the safety of other people.

Shops that are not non-essential are not allowed to open, such as entertainment venues. If you can work from home, work from home. Some places are stricter and have basic shops, such as supermarkets, pharmacies or medical facilities, open their doors, while other establishments, such as food stalls or barber shops, are closed.

Buses, taxis, and ride-hailing services will also be suspended, so that people's living areas will be smaller and unable to move casually. This kind of management does have a certain effect, after all, the movement of people is restricted, and the situation will not become very serious.

Quasi-static means to be in a relatively static state.

Quasi-static refers to being in a relatively static state, that is, in a non-dynamic state. Quasi-static may be either completely stationary or mostly at rest, but not necessarily completely at rest. It also refers to the sum of all the states that a system goes through as it changes from one equilibrium state to another.

In the process, the system deviates from the equilibrium state infinitely little and returns to the equilibrium state at any time, and the process is uniform and slow without any abrupt change, such a process is called a quasi-equilibrium process or a quasi-static process. An ideal process that a thermodynamic system undergoes when it changes.

Each intermediate state in a quasi-static process is in equilibrium. Any process will inevitably destroy the original equilibrium and put the system in a non-equilibrium state. It takes a certain amount of time for the system to reach a new equilibrium state, which is called relaxation time.

The length of this time is determined by the process of attacking the potatoes that leads to equilibrium.

For example, in a gas, the pressure tends to equilibrium as a result of the collision of molecules and the exchange of momentum, and the relaxation time is about 10 seconds to 16 seconds. The homogenization of the concentration in the gas requires the molecules to move over a large distance, and the relaxation time can be extended to a few minutes. If the process takes a long time to rest for a long time, each of its intermediate states is very close to the equilibrium state.

Static depiction, refers to:NarrativeIt is a writing method that depicts characters and scenery in a static state to create vivid and specific touching images. Static description is the most common and basic expression method used in narrative writing. In terms of its techniques, there are mainly white drawings, fine drawings, etc.; As far as the object of description is concerned, there are character descriptions and scenery descriptions.

This kind of description is to shape the ontology of objective things, to convey the author's emotions, and also to create a specific and touching image for the reader, so as to achieve the purpose of description.

Example sentences: 1. Kingfisher.

Motionlessly, staring at the microwave water, waiting for the small fish to swim to the surface.

2. Directly in front, Kunming Lake.

It's as quiet as a mirror, as green as a piece of jasper Pleasure boats and painting boats glide slowly across the lake, leaving almost no traces.

3. The burning clouds of the cave in this place are burned.

There are many changes, one moment red, one moment golden, one moment half purple and half yellow, one moment half gray and half lily Grape gray, pear yellow, eggplant purple, these colors are all in the sky, and there are some colors that I can't say and have never seen.

1. Static: The word static can be understood as stopping and not moving, and the state of not moving is called static. From a physical point of view, it is a state of rest, a state of immobility.

In addition to static, in addition to describing a state of an object, there is also a term for static in **scripting languages.

For example, the common ones are htm, html, shtml, these are the most static scripts, the use of static access to the page in addition to the access speed, and more accelerated search engine index, and the static page does not have any security risks, there is no exploitable vulnerability. The use of static to build** is beneficial and harmless to **.

2. Dynamic: dynamic, refers to the situation of change and development of (things); the active demeanor of the artistic image; Kinematic state of change or examined from the state of kinematic change.

For example: 2. The activity and demeanor of the artistic image: the characters in the painting are different and lifelike.

3. Motion change state or investigation from motion change state: working point; Current analysis.