What bits do you start with when reading and writing?

When reading and writing, it is from a high position.

1. When reading the number within 10,000, from the high position, read in order of numbers, 10,000 is a few to read tens of thousands, thousands of to read thousands, hundreds of hundreds of digits, ten to read dozens, a few to read a few digits, a few to read a few in the middle, a 0 or two 0s in the middle, only read a "zero", no matter how many 0s there are at the end;

2. When writing the number within 10,000, from the high position, write in the order of the numbers, thousands on the thousand, hundreds on the hundred, dozens on the ten, a few on the single bit, the middle or the end of which one is not one, just write 0 on that bit (with 0 place).

In English, when reading and writing, it is from a high position.

Here are the rules and examples:

If you want to talk about the number of two digits, first talk about the number of ten digits, and then the number of single digits.

For example, 21 is twenty-one, 35 is thirty-five, 99 is ninety-nine, and so on.

To say three or more digits, we need to introduce the word and, which is equivalent to sum in Chinese. For example, 101 is onehundred and one, 550 is five hundred and fifty, 999 is nine hundred and ninety-nine, and so on.

Since there is no unit of 10,000 in English, 10,000 in Chinese will be said to be 10,000 in English. 250,000 is said to be two hundred and fifty, 300 is said to be nine hundred and fifty-four thousand and three hundred, and so on.

In English one million is one million, nine and a half million is nine million and five hundred thousand, and so on.

Writing numbers is the same as writing words from left to right order, for example, the number 321, 3 is the high position, 1 is the low position, we start writing from the high position, so the number written is 321.

The readings are also in order from left to right, for example, 456, we start with the high position, first read 400, then read 50 to the right, and finally read 6, which is 456. If a number has zeros in between, such as 601, read six hundred and one.

Both the reads and writes are read and written in numerical order, starting from the high position. If the number of digits is different, then the number with more digits will be larger, and the number with fewer digits will be smaller.

Reading, Chinese pinyin dú

shù means to read out the number of scales on a meter, machine, indicated by a pointer or mercury bar, etc. Reading is the use of words to express numbers. To write a number is to represent a certain number with numbers and symbols.

When reading and writing, start from the (first) digit and follow the order (from left to right).

Pay attention to the number of digits from which digits of reading and writing begin. Count how many digits there are and read them from largest to smallest. When there is a decimal point, pay attention to the number of decimal places. Read 100 million first, then 10,000, and finally 10,000. The reading of 100 million and 10,000 is read according to the reading of each level.

Both the reading and the writing are from [

From the first position on the left, both the reading and the number of writes are from the high position. The integer part is written as an integer, with the decimal point in the lower right corner of the single digit. For example, 4352 is read as four thousand three hundred and fifty-two.

If you don't understand it, you can also understand it as reading or writing from the left.

Dear, what are the bits of reading and writing? It is from the highest position.

Writing numbers is the same as writing words from left to right order, for example, the number 321, 3 is the high position, 1 is the low position, we start writing from the high position, so the number written is 321. The readings are also in order from left to right, for example, 456, we start with the high position, first read 400, then read 50 to the right, and finally read 6, which is 456. If a number has zeros in between, such as 601, read six hundred and one.

When reading and writing, it is from a high position.

1. When reading the number within 10,000, from the high position, read in order of numbers, 10,000 is a few to read tens of thousands, thousands of to read thousands, hundreds of hundreds of digits, ten to read dozens, a few to read a few digits, a few to read a few in the middle, a 0 or two 0s in the middle, only read a "zero", no matter how many 0s there are at the end;

2. When writing the number within 10,000, from the high position, write in the order of the numbers, thousands on the thousand, hundreds on the hundred, dozens on the ten, a few on the single bit, the middle or the end of which one is not one, just write 0 on that bit (with 0 place).

Both the reading and the writing start from the (highest) digit.

The Law of Reading. 1. From the high position, read in digital order

2. Thousands are a few thousands, hundreds are a few hundreds, ten are a few tens, and a single is a few thousands.

3. There is a 0 or several zeros in the middle, and only one zero is read; No matter how many zeros there are at the end, you don't read or write the number rule. 1. From the high position, write in digital order.

2. Write a few on a thousand, a few on a hundred, a few on a hundred, a few on ten, and a few on a single place.

3. If there is no one in the middle or at the end, write 0 on that one.

Both the reading and the write are from the highest digit, and both are written in left-to-right order.

Take 25 as an example, when reading, there are 2 tens in the 10th place, which is read as 20, and 5 1s on each of you are read as 5, which together is read as 25. When writing numbers, twenty means that there are two tens in the ten digits, 2 in the ten digits, 5 in the five digits in the single digits, and 5 in the single digits, which adds up to 25.

Methods of reading and writing numbers.

1. From high to low, read one level at a time, the 0 at the end of each level is not read, and the rest of the digits are only read as a zero for several consecutive 0s; How to write integers: from high to low, write level by level, which digit does not have a unit, just write 0 on that digit

2. For example, it should be read as: one thousand two hundred and three .4, that is, it is read from the highest thousandth place 1, read it in order from high to low, and when it is written, it should be written from the highest thousandth place 1, and written in order from high to low.

3. Reading is to express the number with words, such as: reading as: 1203.4 to write a number is to use numbers and symbols to represent a certain number. Such as: