How to wipe the wooden floor clean, how to wipe the wooden floor clean

The solid wood board should be waxed, one is to maintain the floor, and the other is to facilitate cleaning in the future.

Laminate flooring does not need to be waxed, just squeeze it with a mop and mop it down, and it doesn't matter how much water you bring with you. If you have time and are not afraid of trouble, you can squat on the floor and wipe slowly with a rag little by little.

Maintenance method of solid wood flooring 1, anti-fouling Every two or three months, you can apply floor wax on the floor. Before waxing, dust and dirt should be removed, and then a clean, lint-free soft rag dipped in wax, starting from one edge of the wooden floor, should be wiped in a ring on the board in turn. After wiping evenly, use the original rag (no longer dipped in wax) to wipe from the edge of the original wipe, and wipe it again in turn according to the above plan.

The waxed floor not only cleans and refreshes, but also protects the paint film and delays aging.

When maintaining the solid wood floor, we must pay attention to keeping the floor dry and clean, and do not wet it with water or scrub it with alkaline water or soapy water, so as not to destroy the brightness of the paint. If it is dirty or dirty, it can be wiped with a dry cloth. It is also necessary to wax once a month, but wipe off moisture and stains before waxing.

2. Lacquer use.

After three or five years, you can use the same kind of paint as the first paint floor to repaint the floor. In addition to dust and dirt removal before painting, a fine water sandpaper should be applied, dipped in warm water, and the board surface should be gently sanded to remove the remaining oil stains on it, and to grind off the small paint particles left in the last paint. After sanding, wipe it clean with a clean rag and you can apply the paint.

In this way, the painted floor will be smoother, cleaner and brighter3, if the heating leaks and there is water on the wooden floor, it must be wiped clean in time, and it cannot be directly exposed to the sun or baked with an electric stove, so as not to dry too quickly and the floor cracks. If the solid wood floor is not used for a long time, do not cover it with plastic sheeting or newspaper, because after a long time, the paint film will be sticky and lose its luster. At the same time, do not put hot water basins, hot rice cookers and other objects directly on the floor to avoid scalding the paint film.

4. Scrubbing can be cleaned with a vacuum cleaner first, and then cleaned with a soft cloth dipped in a special detergent or dilution of soap chips. For large area cleaning, it can be done with a sprayer or rotary cleaner. For natural lacquered solid wood floors, water is not good for it, so try to minimize excess water when cleaning, and be sure to wring out the rag when scrubbing.

Oil wax solid wood flooring to remove black rubber wear marks and other stains that cannot be removed with water, can be removed with a soft cloth dipped in low concentration alcohol or a little liquor.

How to maintain wooden floors.

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water, soapy water, etc., so as not to damage the paint film. It can be wiped with a wrung out cotton mop; If the stain is rubbed with steel wool, do not wipe it with a wet mop, gasoline, flammable materials and high-temperature liquids.

2. Waxing every once in a while (laminate flooring is mainly waxed at the interface), and the time interval depends on the finish of the floor paint. The method is to first wipe the floor with a semi-dry rag and wax it. Apply evenly to the surface of the floor and let it "soak through".

Once it has dried, rub it back and forth on the floor with a soft, dry cloth until smooth and shiny.

3. If you accidentally sprinkle water on the ground, you must wipe it with a dry soft cloth in time, and you can't directly expose it to the sun or bake it with an electric stove after wiping, so as not to dry too quickly and the floor will dry out.

4. After paving, the floor should be exposed to direct sunlight as much as possible, so as to avoid excessive ultraviolet radiation of the paint and early cracking and aging.

5. Do not throw cigarette butts or matches and other fires on the floor to avoid scorching the surface of the floor. Avoid sharp, sharp objects scratching or being weighed by heavy objects for long periods of time.

6. If the paved floor is not inhabited for a long time, do not cover it with plastic sheeting or newspaper. Over time, the paint film will become sticky and lose its luster. At the same time, do not use very hot objects to directly touch the floor.

7. When the floor is just laid, the window should be opened frequently for ventilation, on the one hand, for the indoor air freshness, and on the other hand, for the emitting moisture.

You can usually use a vacuum cleaner or broom to clean the dust on the surface of the solid wood floor, and then wipe the surface of the solid wood floor with a rag or mop that is soaked and wrung out until it does not drip water. After mopping the floor, it is best to open the doors and windows to allow air circulation, dry the solid wood wood floor as soon as possible, and keep the solid wood wood floor dry and clean.

Wax the solid wood floor from time to time, but the waxing should not be too frequent, at least once every 6 months.

When walking on solid wood floors, you should wear cloth slippers as much as possible, preferably barefoot. Paste a soft-bottom protective pad on the "feet" of the furniture to avoid scratching the wear-resistant layer of the solid wood floor on the "feet" of the furniture, and do not let heavy items smash the wear-resistant layer.

If there are grease stains on the ground, you can pour some vinegar on them and scrub them.

The floor is sprayed with rice washing water and then sprinkled with wax, which has an excellent effect.

The effect of spraying rice washing water on the floor and then waxing it is absolutely wonderful. This novel method is actually very simple, specifically: wipe directly on the floor with a rag dipped in rice washing water, and then dry wipe.

Of course, you can also spray the washing water evenly on the floor and wait for 5 minutes, so that the dirt on the floor will "automatically" float to it. Rice bran water forms a membrane on the floor. At this time, without force, gently wipe the old cotton clothes 4-5 times, carefully wipe the floor clean, leave it for another 15 minutes, let the floor dry, and then wax the floor.

The floor is so polished and waxed that it is shiny and clean, and it is not slippery. The items needed are rice washing water, watering cans for spraying rice washing water (larger ones are easy to make), and old cotton clothes.

It may seem a bit troublesome to sprinkle rice water and then wipe the floor, but this method is really efficient and the effect is even more unique. In order to make it easier to wipe and clean, the furniture should be moved to the corner first. If the room is large, spray half of the floor before cleaning the other half.

Food stains should be sprayed with rice washing water to make them easy to wipe off.

Wipe the floor with fresh cream to make it brighter than with rice washing water, but it is easy to leave residue because of the high amount of oil, so it must be wiped vigorously.

Whether it's new, unwaxed or old, cracked floors, wax them first and dry them thoroughly before you start working.

1) Wax at least three times, and rub the floor with a non-fluffy cloth or waxer each time to allow the wax oil to penetrate the wood.

2) To get a shiny effect, gently rub and polish each wax with a soft cloth.

You need to pay attention when walking in the above methods to avoid slipping on the smooth floor.

You can use Bi Li-Zo to maintain it.