Detailed installation method for Type3

1.First find the image of the mathtype, then right-click on it, and then find the location of the open file as shown below.

2.At this point, we open the Word2016 Open option.

<>4.Select the option in the front bridge pop-up box, find the mathtype folder in the pop-up folder, and find the word folder in officesupport, and select it.

5.If we go back to the word document, we can see that there is a mathtype in the word menu bar, which means that the installation is successful, as shown in the figure below.

Install the Type3 software.

One: Install the software.

1 Insert the type3 disc into the optical drive, the screen will be automatically installed, if the computer does not automatically install the book, please right-click to open the disc, select the type3v42oo folder, open it and double-click to install, and then install it according to the prompts, all the way down, the installation will be completed automatically. After the installation is completed, restart the computer according to the prompts, open my computer, right-click to open the CD, open the type3 folder, and copy and paste the datakit and exe in the crack directory to the installation directory x: vision (x is the installation drive letter of type3, the same below).

Two: Install Chinese character single lines.

Open my computer, right-click to open the CD, open the 'Chinese Character Single Line' folder, copy the file to the installation directory x: vision fonts Zhou Qin Vision, and the Chinese character single line will be installed.

Three: post-installation processing.

Turn on my computer, right-click to open the CD, and copy and paste the type3 post-processing into the installation directory X: Vision PostPro.

Four: Set up the engraving page.

After the above work is completed, double-click the type3 icon on the desktop to enter the type3 interface window. Click 'Change' to select the 'Engravable Pages' option, set the width, height, and depth to (small and medium) and (large models) respectively, and set the left, right, top, and bottom edges to 0. Click ''Options', set the width, height, and depth to (small and medium-sized models) and (large models) respectively, and set the left, right, top, and bottom edges to 0.

After the above work is completed, you can use the Type3 software to design the DC series computer engraving machine. Finally, I wish you all a fortune!

The operation process of the engraving machine seems to be complicated and difficult to understand, but in fact, it can be learned in 1 day, and it also depends on the individual's understanding ability. Here are the five steps of engraving with an engraver:

1.First, arrange the layout, including setting parameters such as material height, size, distance, and line spacing. It is best to copy the same content in batches.

2.Then set the path (2D, 3D, cut), choose the knife according to the size of the font, the thickness of the line to choose the appropriate tool, after walking the path to see if there is a place where the word is not gone, if there is a proof that the tool is set up or repair the text. Characters of different depths should take the path of different depths, and the general engraving is 2D to choose a flat bottom sharp knife, and a straight knife to cut and cut.

In order to process the actual size of the item and the design, it is best to design the tool compensation in advance, the path calculation selection to calculate the inner and outer contours, the width is half of the selected tool, the general engraving is the inner contour, the cutting is the outer contour, and the original drawing is not retained, 3Save the engraving path, different depths of the content store different files, for example, there are both engraving and cutting in one layout, because the engraving depth or the tool selected is different, it must be saved as two path files. When you finish saving the engraving path, you must delete the engraving path as a cutting path and save the path.

4.Open the motion management system, click the right button to select and load to open the path to be engraved saved in Wentai, replace it with the selected tool, move the engraving head to the material to be engraved in the manual to set the origin point (click on the working coordinates x, y, z), when cutting, generally move the tool to the front of the material, and set the z-axis and the table surface just after touching the z-axis to 0, and move the tool to the lower left corner of the material in lifting the z-axis, and the y can be set at 0. . . Assuming that there are both engraving and cutting on the same layout, when the cutter needs to be replaced, remove the engraving cutter after the engraving is completed, and replace the cutting cutter as long as the Z-axis is re-set to the origin, and the X, Y coordinates must not be changed, otherwise the cutting and engraving do not match the typesetting layout.

When cutting, pay attention to slow down the feed speed, and adjust the following spindle speed for different materials).

5.Lift the spindle, move the gantry to a suitable position, and the processing is completed.

Normal phenomenon, it means that your computer does not have an old-fashioned EPP printer interface, and the woodpecker engraving machine uses a cracked version of T3, so there are many problems.

There are cracking instructions in the software, copy 2 files to the installation directory, and then execute it.

Install the Type3 software.

One: Install the software.

1 Insert the type3 disc into the optical drive, the screen will be automatically installed, if the computer is not automatically installed, please right-click to open the disc, select the type3v42oo folder, double-click to install after opening, and then install according to the prompts, all the way down, the installation will be completed automatically. After the installation is completed, restart the computer according to the prompts, open my computer, right-click to open the CD, open the type3 folder, and copy and paste the datakit and exe in the crack directory to the installation directory x: vision (x is the installation drive letter of type3, the same below).

Two: Install Chinese character single lines.

Open my computer, right-click to open the disc, open the 'Chinese Character Single Line' folder, and place the file.

Copy it to the installation directory x: vision fonts vision, and the single line of the Chinese characters will be installed.

Three: post-installation processing.

Turn on my computer, right-click to open the disc, and it will be.

Type3 post-processing

Copy and paste it into the installation directory X: Vision PostPro.

Four: Set up the engraving page.

When the above work is done, double-click type3 on the desktop

icon to enter the type3 interface window. Click 'Change' to select the 'Engravable Pages' option, set the width, height, and depth to (small and medium) and (large models) respectively, and set the left, right, top, and bottom edges to 0. Click ''Options', set the width, height, and depth to (small and medium-sized models) and (large models) respectively, and set the left, right, top, and bottom edges to 0.