How to install a chandelier? How to install the chandelier

Many people don't know how to install after buying the ceiling, some even go to the installation master, in fact, we can install it ourselves, the specific installation steps are as follows: 1. Install the drill bit Select the right electric drill Install the drill bit Precautions: The hole in the ceiling is generally 6mm, and the installation is to choose the appropriate electric drill specification 2. Find the hole on the top plate of the suction cup Take the hanging plate off the ceiling tray Align the ceiling plate on the screw 3, drill the hole on the wall Mark the hole 4, the expansion screw Race the expansion screw into the hole and hammer it in 5, fix the hanging plate and completely embed the expansion screw into the wall Fixed the hanging plate 6, fix the ceiling plate and the lamp body Connect the hanging plate and the ceiling plate with screws Tighten the screws and fix the ceiling tray The last step is to install the lampshade.

When buying, find an installer to install it, after all, people are professional. It's safer and faster than installing it yourself. But if you pretend to be yourself, you can do it. Recommend a**you, search: the only ornament. The articles inside are taught, you look for them.

1. Choose the right chandelier to take the lamp: choose the right chandelier according to the room area and decoration style.

2. Prepare tools: chandelier, chandelier installation base, chandelier metal connecting rod, spring wire, electric drill, screws, etc.

3. Measuring height: Use a tape measure to measure the distance from the installation base of the chandelier to the ground to determine the installation position of the chandelier.

4. Install the chandelier installation base: Use an electric drill to fix the chandelier installation base in the predetermined position.

5. Install the metal connecting rod of the chandelier: insert the metal connecting rod of the chandelier into the core hole of the base of the chandelier, and then tighten it with screws. Hand in hand.

6. Connect the power supply: according to the wire diagram on the chandelier, connect the wires in the lamp body with the home power supply.

7. Replace the chandelier lamps: Replace the lamps and lanterns according to the specifications of the lamps and the interface of the chandelier.

8. Confirm the installation effect: tighten the fixing screws and adjust the angle of the chandelier to confirm the installation effect.

1. First of all, you should draw the drilling point and use a percussion drill to punch the hole.

2. Then drive the expansion screw into the hole, and then use a metal hanging plate or hook to fix the ceiling and connect the chandelier base.

3. Connect the power supply wire, and wrap the exposed part of the copper wire with insulating tape.

4. Connect the boom with the base and adjust the appropriate height.

5. Finally, install the lampshade and bulb of the chandelier.

The installation of the chandelier is generally divided into four steps: preliminary preparation, fixing the base and lamp body, connecting lines, and chandelier commissioning.

1. Preliminary preparation: first fix the embedded parts of the chandelier, drill holes with an electric drill, and check whether the parts of the chandelier are complete.

2. Fix the base and the lamp body: turn off the power supply, connect the hanging plate and the ceiling plate to the expansion screw, and when installing the screws, you need to tighten them on both sides in turn, so as to ensure the balance of the hanging plate. After the base is fixed, the pendant chain of the chandelier and the lamp body of the chandelier are fixed on the ceiling, and the chain needs to reserve a certain length so that the angle and height of the lighting can be adjusted in the future.

3. Connecting lines: connect the wires between the line and the chandelier, wrap the insulating tape, and take insulation measures to avoid short circuits. After that, the new light fixture was put back in, and the ground wire and the live wire were installed separately.

4. Chandelier debugging: check whether the lighting status and lighting effect are normal.

The installation method of the chandelier is:

1. Embed iron or wood bricks in the structural layer (except for the load-bearing water bricks). The burial position should be accurate and there should be sufficient room for adjustment.

2. Set up transition connectors on iron parts and wooden bricks in order to adjust the error of the parts, which can be nailed, welded and screwed through with the parts.

3. The boom, sling and transition connector are connected.

Installation precautions: The following three points should be paid attention to during installation and construction.

1. If there are multiple chandeliers during installation, attention should be paid to their position and length, and chandeliers can be installed at the same time as the ceiling, so that the position and height of the lamps can be adjusted based on the ceiling joists.

2. The must-have surface of the boom out of the roof can be directly discharged and the method of adding casing. The addition of a pipe facilitates installation, and the chandelier keeps the ceiling panel intact and drills holes only where the outlet pipe is needed. The hanging cup directly out of the ceiling is not easy to align when the board surface is drilled during installation.

Sometimes the method of installing the boom first and then cutting the hole in the panel may be used, but it has an impact on the decorative effect.

3. The boom, sling and grille are connected.

The boom and sling are directly nailed and screwed on the secondary joist, or are connected to the vertical grid by the method of perforating the above-mentioned plate surface. Or hang on the cross grille that is added between the secondary grilles. The power of the light source used in ceiling lamps: 40 100W for incandescent bulbs and 30 40W for fluorescent lamps.

Chandelier is a common lamp in home decoration, which can not only provide a light source, but also play a role in beautifying the indoor environment. However, the installation of the chandelier needs to pay attention to some details, and the following will introduce the installation method of the chandelier.

1. Preparations.

1.Choose the right chandelier: When shopping for a chandelier, choose the right chandelier according to the size of your room and the style of decoration. At the same time, pay attention to the weight and size of the chandelier to ensure that it can be installed in the ceiling.

2.Prepare tools: Some tools are required to install chandeliers, such as electric drills, screwdrivers, wrenches, wire pliers, etc., which should be prepared in advance.

3.Turn off the power: Before installing the chandelier, be sure to turn off the power first to avoid electric shock accidents.

Second, the installation steps.

1.Determine the location of the chandelier: Determine the position of the chandelier on the ceiling, and then mark the center point of the chandelier on the ceiling with a pen.

2.Install the chandelier base: Fix the chandelier base to the ceiling, use an electric drill to drill holes, and then use expansion screws to secure the chandelier base to the ceiling.

3.Connect the wires: Pass the wires of the chandelier through the base and connect the wires with the power cords in the room. When connecting the wires, be careful to match the color of the wires correctly to avoid electric shock accidents.

4.Install the chandelier shade: Install the chandelier shade on the base of the chandelier, and then fix the lampshade to the base with screws.

5.Install the bulb: Install the bulb in the chandelier shade and cover the lampshade.

6.Test the chandelier: After the installation is complete, turn on the power and test whether the chandelier is working properly.

3. Precautions.

1.When installing a chandelier, pay attention to the weight and size of the chandelier to ensure that it can be installed on the ceiling.

2.When connecting the wires, be careful to match the color of the wires correctly to avoid electric shock accidents.

3.Be sure to turn off the power before installing the trembling and stuffy chandelier to avoid electric shock accidents.

4.When installing chandeliers, pay attention to safety and do not stand on chairs or other unstable objects to avoid accidents.

In conclusion, there are some details that need to be paid attention to when installing a chandelier, and only by doing the work of preparation and following the correct steps to install it can you ensure the safety and beauty of the chandelier.

There are the following steps for the installation method of the chandelier:

Prepare installation tools: Installing chandeliers requires tools such as electric drills, wire pliers, and wrenches.

2.Turn off the power: Before installing the chandelier, the power must be turned off to ensure safety.

3.Install the chandelier base: Depending on how the chandelier base is installed, use an electric drill or wrench to secure the chandelier base to the ceiling.

4.Connect the wires: Pass the wires through the wire holes in the ceiling and use the wire pliers to connect the wire ends to the chandelier's wires.

5.Gucha Ziyuan Dingchandelier: Fix the chandelier on the base of the chandelier, pay attention to the fixing method and installation method of the chandelier, so as not to install it firmly.

6.Debugging the chandelier: After completing the installation of the chandelier, turn on the power again to test whether the chandelier can work normally, if there is a problem, it needs to be repaired in time.

It should be noted that when carrying out the installation of chandeliers, it is important to pay attention to safety and keep it stable to avoid accidents. If you have no installation experience yourself, you can seek the help of a professional to ensure the quality and safety of the installation.

The method usually requires the following steps: First, make sure that the installation location can withstand the weight of the chandelier. Then, determine the installation method of the chandelier according to the installation instructions of the chandelier.

It is usually necessary to connect wires, secure the base of the chandelier, and install the bulb. Finally, the circuit connection is made and the lamp is tested to see if the lamp is working normally. If you are not familiar with electrical work, it is recommended to ask a professional electrician to install it.

Before installing the chandelier, it is necessary to install a bracket that can bear the weight of the chandelier on the ceiling, and then use the driving of the chandelier Lu Liang to lift the key and the chandelier to hang it up to Zaobi, and the screws can be zero.

The installation of the chandelier needs to determine the location first, then install the base, and then link the light line.

Depending on the function space, the installation position of the chandelier is also different. After the position of the chandelier is determined, it is also necessary to pay attention to the detection of the bearing capacity of the position, after all, the weight of a chandelier is still quite heavy, especially the chandelier in the living room is large and heavy, if the top bearing capacity is not enough, there will be a danger of falling off after a long time. Therefore, the installation position of the chandelier should be a solid masonry top or wall, not a light wooden top surface.

Place the base of the chandelier against the top or wall installation position, find the hole and mark it, then put down the base, use an electric drill with the same hole specifications to punch the hole, the ceiling hole is generally 6 mm, and the expansion bolt can be installed after the hole is punched, which is used to fix the base of the chandelier, but pay attention to the depth of the hole, plug the expansion screw into the hole, use a hammer to knock it in, and then tighten and fix the base with the expansion bolt, which should be the same as the predetermined installation position, and there can be no deviation.

After the base of the chandelier is fixed, you can connect the lamp wire and the power cord, but pay attention to which potato is good to contact the two wires connected, wrap it with black tape, and pay attention to keep the spacing, try not to put the two connectors under a piece of metal to prevent the danger of short circuit.

Precautions for chandelier installation

1. Pay attention to the position and length of the chandelier

If the chandelier is a combination of multiple small chandeliers, then pay attention to the distance and length relationship between them, uncertain spacing and length can refer to the lighting manual, and then use the size to measure, and mark on the top surface, after installing the base, you can also measure again, adjust the position and height, so as not to affect the overall aesthetics of the chandelier.

2. Pay attention to the firm safety of the base

The base of the chandelier must be installed securely, otherwise it will be dangerous if it falls. If the weight of the chandelier is greater than 3 kg, the embedded hook should be used to directly fix the support and hanger before the chandelier can be installed. Reminder:

No matter how many chandeliers are installed, the base must be installed firmly, and in strict accordance with the requirements of the manual, so as not to bring hidden dangers to family safety.

3. Pay attention to the installation height of the chandelier

Now the floor height of commercial residential buildings is not very high, so the indoor installation of chandeliers should pay attention to the height, so as not to install too low to affect people's sight, especially in the living room and dining room, chandeliers can not be too low, should not obstruct the normal people's line of sight, the light is not dazzling. Generally, the boom of the chandelier has a certain length of thread, which can be adjusted in height according to needs. Considering the height of the floor, it is not recommended to choose a longer chandelier for general commercial housing, and a simple ceiling lamp can be selected to make the interior bright and beautiful.

Summary. Answer: Hello kiss How to install the chandelier to choose the installation location such as the living room, dining room, kitchen will usually be installed in the middle, so as to ensure that the light is balanced, if it is a bedroom, do not install it directly above the bed, chandelier to choose a masonry structure, so that it can be more....2. Remove the chandelier maskThe chandelier mask has two fixed ways: buckle and rotation, and the lamp tube can also be removed after the mask is removed, which can prevent damage during installation.

Answer: Hello kiss How to install the chandelier to choose the installation location such as the living room, dining room, kitchen will usually be installed in the middle, so as to ensure that the light is balanced, if it is a bedroom, do not install it directly above the bed, chandelier to choose a masonry structure, so that it can be more....2. Remove the chandelier mask, the chandelier mask has two fixed ways of buckle and rotational disturbance, and the lamp tube can also be removed after the face mask is removed, which can prevent damage during installation.

1. Which grip should first draw the drilling point and use a percussion drill to punch the hole. 2. Then drive the Jianshi expansion screw into the hole, and then use a metal hanging plate or hook to fix the ceiling and connect the chandelier base. 3. Connect the source wire of the electric stopper, and wrap the exposed part of the copper wire with insulating tape.

4. Connect the boom with the base and adjust the appropriate height.

1.Prepare tools and materials: chandeliers, chandelier brackets, electric drills, screwdrivers, expansion screws, wires, wire joints, insulating tape, wire clips, ladders, etc.

2.Turn off the power: Before installing the chandelier, be sure to turn off the power to avoid electric shock accidents.

3.Install the chandelier bracket: Use an electric drill and screwdriver to fix the chandelier bracket to the ceiling, taking care to choose the appropriate screws and expansion screws to ensure that the bracket is secure.

4.Connect the wires: Connect the wires of the chandelier through the wire clips on the bracket and the wires on the ceiling. Pay attention to the color of the wire when connecting, usually red is the live wire, blue is the neutral wire, and yellow-green is the ground wire.

5.Fix the chandelier: Connect the base of the chandelier with the screws on the bracket, and pay attention to fix the base of the chandelier firmly.

6.Install the bulb: Choose the right bulb according to the specifications of the chandelier and install the bulb on the chandelier.

7.Turn on the power switch: Turn on the power switch and check if the chandelier is working properly.

9.Clean up the site: Clean up the garbage and tools generated during the installation of the chandelier and keep the site tidy.