Newly bought computer memory problems Call for help

Your system is 32-bit, the memory is normal, if Vista is an enterprise or flagship version, you can consider turning on physical memory addressing, and it should also be turned on in the BIOS, so that the 32-bit system can also recognize and use up to 128GB of memory, but a single application can only use 2GB of memory, so it doesn't make a lot of sense, and it will install a 64-bit system in the future, right?

DDR3 1600 frequency is 800 no problem, 1600 is the equivalent DDR frequency, and the actual frequency of the chip is 200MHz.

Intel does not allow dual-channel to be turned on while XMP memory technology (DDR31600) is enabled, if you want to turn on dual-channel, you must turn off XMP, i.e. downclock the memory to 1333.

What kind of array do you have with 6 groups of 1TB hard drives? raid 0？It is recommended to use 3 to make up RAID 5 and 2 to group RAID 0. The remaining one is used separately, so that the data security is high.

64-bit systems and triple channels don't matter!! It's Intel XMP that restricts memory multi-channel on! The 64-bit system is now very imperfect, and many programs have serious problems running (mainly games), so it is not recommended to install them.

A 32-bit system is a bottleneck, so let's switch to a 64-bit one. In this way, three channels can be opened, and 3DMark can pass 2W.

My 4G RAM can only read out more than 3G.

1.When the physical memory in our computer system is insufficient, the system will automatically enable the virtual memory to solve the problem of insufficient memory. The so-called virtual memory means that the system uses an area on the hard disk as physical memory (RAM), but because the read and write speed of the hard disk and the memory are far from comparable, it will have in performance.

2.Select "Computer", click the right mouse button, select "Properties", and in the pop-up system window, click "Advanced System Settings" on the left. 3.

Then in the System Properties window, click on "Advanced" and then click on "Settings". 4.Under "Performance Options", click on "Tune to Best Performance".

The advantage of this setup is that the visual effect is sacrificed, so that the system can reduce the occupation of hardware resources.

When the computer shows that the memory is insufficient, what should be solved at this time?

1. First open the Start menu and find the Control Panel option.

2. Then select System Options.

3. Select the Advanced System Settings option.

4. Select the Settings button in the Advanced tab.

5. Click the Change button in the Performance tab.

6. Check the automatic hosting, and then click the OK button to complete.

Set the size in My Computer - Properties - Advanced - Performance Settings - Advanced - Virtual Memory Changes, but such a large and small size will put an extra burden on the system and make the system run slower! For this reason, it is best to customize the minimum and maximum values of virtual memory to avoid frequent resizes. Replacing a larger memory module can also solve this problem.

When the computer is running, virtual memory is used only if there is not enough physical memory. Therefore, it is necessary to open the software reasonably and regularly clean up the junk of the system and scan the system for anti-virus, otherwise the accumulation of junk files and Trojan virus programs will occupy most of your memory, making your system slow down and bringing you a great burden.

The computer prompts the system to run out of memory to solve the problem:

Right-click [My Computer] - click [Properties].

Click [Advanced] in the System Properties tab, and then click [Settings] under [Performance] to click [Advanced] in the pop-up performance tab

Click [Change] in the bottom virtual memory, set the virtual memory to a reasonable value in the dialog box that appears, and click OK. If shown. When the virtual memory is large enough, there will be no out-of-memory pop-up.

Is this problem solved? I'm also a newly equipped computer, and the configuration is similar to yours, but when I run a large software, the same dialog box will pop up like you, and the solution will be solved!!

How big is the memory? You can use Task Manager to see what software consumes memory, and it is possible that there is more pre-installed software.

When you open your computer, your browser shows that your memory is insufficient.

The new notebook always shows that the memory is low because some programs take up a lot of memory, and you can just end the process.

Tools to prepare: Laptop.

1. Press the keyboard shortcut Ctrl+Alt+Delete key combination to enter the task manager.

2. Click "Performance" at the top to view the current memory usage.

3. Switch to the "Processes" tab of Task Manager, and then click "Memory" to let the system sort by the size of the occupied memory.

4. My process management shows that the application "Firefox" occupies a lot of memory.

5. Go back to the "Performance" in the task manager to check the current available memory, and you will find that the available memory of the system is more than the original.

The memory of this computer is only 2GB,If it's the installed win7 system,The memory is not enough,The system will occupy about 1G memory,The rest will be the memory used for other programs to run,The memory is definitely not enough when the big program runs。

It should be a virtual memory issue, you press the settings below as described below.

Right-click on the "My Computer" icon on the desktop and select the "Properties" option in the context menu that appears to open the "System Properties" window. Click on the "Advanced" tab in the window, and a dialog box for advanced settings appears.

Click the "Settings" button in the "Performance" area and select the "Advanced" tab in the "Performance Options" window that appears to open its dialog box.

In this dialog box, you can see the area about virtual memory, click the "Change" button to enter the "Virtual Memory" setting window. Select a partition with a large free capacity, check the box before "Custom size", fill in the specific values in the "Initial size" and "Maximum" columns, then click the "Set OK" button, and finally restart the computer to make the virtual memory settings take effect.

Suggestion: You can divide a small partition for virtual memory, IE temporary file storage, etc., and then you can defragment the partition regularly, so as to better improve the work efficiency of the computer.

What software you have installed, don't put it in the C drive when you install the software in the future.