-
It is possible that the backup file restored with one click has been damaged by infection and needs to be reinstalled in the system, which is reinstalled with ghost, not restored!
-
It doesn't matter what you have to restore with one click! It could be that your other partitions are poisoned. Causes you to be poisoned immediately after every time you restore the system. It's best to reformat the other scoring areas once, or you restore the system, but don't touch the other scoring areas, upgrade the antivirus software to check and kill viruses.
Note: "Do not click on any partition other than the C drive.
What's bad about Rising, there's actually nothing good about Kaba.
There's no such thing as the best antivirus, as long as it's practical.
Killing soft can never be faster than a virus.
Author: w5024 - soldier level 10-3 20:48 I didn't look at the questions carefully, I was answering the questions randomly.
Thanks for the reminder.
-
1.Poor heat dissipation of the machine, 2Hard drive track damage. 3.Poor memory contact.
-
Open the case to see if the CPU fan is rotating, it may be that the line is blocking the fan, and the CPU will crash if the heat dissipation is not good.
-
Don't talk nonsense if you don't understand, the landlord is a broken memory, you first pull it off and rub it with elephant skin and then press it, or the same old words are to make you ruined.
-
The restore only restores the C area, and the other partitions need to be formatted or disinfected.
-
Rising is garbage.
Let's use the Russian Kaspersky.
Also, whether your computer is outdated.
-
Hello, please analyze and solve it from the following aspects.
1 Computer poisoning or malware may also cause computer abnormalities, the solution is to upgrade the anti-virus software, anti-virus, if it really doesn't work, reinstall or restore the system. Reinstalling or restoring the system can completely resolve the software side of the problem.
2. Unreasonable configuration, uncoordinated, and incorrect BIOS settings will also cause computer abnormalities, so you should find more professional personnel to solve the problem when installing or upgrading hardware. You can send the configuration down to help you see if the configuration is reasonable.
3 The high temperature of the computer will also cause the computer to be abnormal, it is recommended to use Master Lu software to measure the temperature of the hardware, and then solve it.
4. Due to the voltage instability point, the power supply is not enough, and it will often cause computer abnormalities, if it is caused by these reasons, configure a voltage regulator, and replace the high-power power supply to solve the problem.
5 Caused by running large software and programs, such as playing big games, using large software, watching Blu-ray movies, etc., it should be caused by poor computer hardware configuration. The only solution is to upgrade the computer configuration and optimize the computer system.
6 Old computer Because there is too much dust in the case, it is easy to cause computer abnormalities caused by short circuits. Clean the inside of the chassis frequently.
7 Old computer Due to the long period of use, the capacitance of the motherboard circuit is aging, which will also cause abnormal problems in the computer. Only sent for repair or replacement.
8 Old computer hard disk will also fail after a long time, causing the computer to crash, which requires the use of hard disk testing software to test the hard disk, repartitioning the installation system can repair the hard disk logical bad sectors, can not be repaired, and only to replace the hard disk.
If it helps, please choose the answer you are satisfied with!!
-
Hello friends!
The probability of memory module problems is more than 75%, and the 25% chance is that the hardware temperature is too high, resulting in a crash or protective reboot or blue screen. Rule out the case of high temperature and blue screen of death restart.
Open the chassis. Plug the memory module back in. Two memory sticks. Just plug in just one.
Check whether the air dissipation of the CPU is running normally, whether there is a gap between the CPU and the heat sink, and whether the silicone grease is dry or cracked.
Add silicone grease and debug the air dissipation. Unplug all the hardware and clean it up.
In addition, the chassis has now been opened. Use a hair dryer to clean up the dust. Don't forget to go to the door and deal with it.
Otherwise, the house will be filled with smoke.
If it's still a blue screen. Just find a normal memory module and try it. Probably just fine. That means your memory module is broken.
If you are Ben. It's sad ... It's better not to disassemble this book by yourself for novices.
If it's a book, take it out and find a repair point, disassemble it, and try to change the memory.。。。 It is risky for novices to split the book. Think again.
There is also a 15% chance that it is a disk error caused by a 00000000ed error.
and drivers and other programs. The workaround is to enter safe mode, disable all startup items, and then start again.
When you're done, please give me the answer. Thank you.
-
Landlord, uninstall the 360 in your machine and it's basically good!
Then use the system's built-in cleanup tool to clean up the junk and redundant patch files, and finally compress it!
If the above method does not work, please refer to the hardware processing scheme of other friends.
-
The piracy of the system you are using is too serious.
1. The CPU is overloaded, or it is not working properly. Check CPU and graphics card cooling, dust removal, oiling, or replace fans. >>>More
It's a very simple problem, there is a problem with the memory you bought later, you can plug in the 256 one, unplug the 1g new one, if there is no problem, then it is definitely the 1G new memory problem later.
1. Incorrect screen refresh rate setting: If the refresh rate is set incorrectly, it will cause the screen to flicker. You can right-click on the blank space of the desktop, select Properties, switch to the settings window, then open the Advanced tab, switch to the monitor window, and reset the resolution. >>>More
Is it a virus??
Or is the hardware aging? >>>More
Hello. Please analyze and solve the problem from the following aspects. >>>More