-
Cleaning an air conditioner can actually be done in just a few simple steps. First of all, we need to find a watering can to place the air conditioner cleaner, and generally when we buy the air conditioner cleaner, we will give a separate watering can. Secondly, we also need to remove the filter surface of the air conditioner, and then use a watering can filled with air conditioner cleaning agent to spray and wipe the inside of the air conditioner that needs to be cleaned.
In the end, we just had to wait a minute quietly before we could rinse with the water gun jug. Then it is the easiest way to wipe off the water droplets, and then the air conditioner is basically cleaned. Of course, the removed filter also needs to be cleaned, in fact, the filter is the best to clean, only need to be washed with water.
After all these steps are completed, you only need to wait for the water to evaporate before installation.
It should be specially reminded that in the process of cleaning, the air conditioner cleaning agent must avoid direct contact with the eyes, nor can it be in direct contact with the **, and it is recommended to wear rubber gloves when cleaning. If you have children at home, be sure to store them in a place that is not easily accessible to children.
-
The nozzle of the air conditioner cleaner needs to be rotated to a suitable position, and the nozzle can be pressed to spray out the cleaning machine to clean the air conditioner.
-
If the air conditioner cleaning agent is not sprayed, the switch is not opened, and if you turn the square opening of the nozzle 90 degrees and press it again, it will be sprayed.
-
If you want to use air conditioner cleaner, it is best to find a professional cleaning person, because if you do not clean it properly, you may be damaged by the machine.
-
Well, you can spray the air conditioner cleaner directly on the surface of the air conditioner and scrub it.
-
If it is a new one, you turn the lid, the expression ability is average, the knowledge you have learned is limited, and I hope to help you!
-
Air conditioner cleaner is something that should be pressed by hand and sprayed outward, if it can't be sprayed, whether there is no inside.
-
Turn the nozzle once, and then press the switch to spray out.
-
This kind of switch is not sprayed now, which shows that its nozzle still has a certain fault and has a unique place.
-
What is the deal with adjusting the detergent and not being able to press it out even if you press the switch with your fingers? Without squirting, you may be that the switch below is not unscrewed.
-
How do you use and talk and talk about the switch squirting out what's going on? It may be like a button, or it can be opened at once.
-
The difference is that when the foam cleaner is used, a lot of foam will bulge out from the aluminum fins to push out the dirt inside, and it is not a foam cleaner that does not have this function. Air conditioning foam cleaner has strong penetration, large cleaning surface, can clean air conditioning evaporator and various ventilation pipes, strengthen the refrigeration effect, effectively maintain the air conditioning system, and prolong the service life of the air conditioning system. Non-bubbled.
Air conditioner cleaners, foam, nozzles.
Carburetor cleaner is about ten dollars on the market.
It is better to use a 2-in-1 cleaner for cleaning car interiors, and it is recommended to buy a 2-in-1 cleaner from regular channels. The two-in-one cleaner is the two-in-one shampoo, which is a high-end table and cleaner, which is a two-in-one cleaning and nursing function, which has both cleaning function and waxing function, which can meet the requirements of rapid cleaning and waxing. The waxing ingredient is a water wax with a unique formula, which can form a wax film on the paint surface during the cleaning operation, increasing the brightness of the car body and effectively protecting the car paint. >>>More
The 365 stainless steel weld cleaning agent of Shenzhen passivation technology does not use any equipment, is environmentally friendly, and can be done with a plastic frame.
The characteristic of silicone oil cleaning agent is that it is neutral and environmentally friendly, and cleans uncured silicone oil. >>>More
You can combine baking soda, white vinegar, and dish soap to clean tiles, and the specific cleaning method is to prepare a free watering can, pour 2 caps of baking soda, 4 caps of white vinegar and 1 cap of dish soap into the watering can, then add a small amount of water, shake it vigorously a few times, and then you can spray the homemade detergent on the tiles, wait for half an hour and then scrub with a sponge. >>>More