How to paste kitchen tiles? How to paste kitchen tiles?

In the kitchen, the general choice of wall and floor decoration materials is ceramic tiles, because the kitchen is the worst area in the family environment, especially the Chinese cooking method will produce a large number of oil stains, which is a great test for the wall and ground in the kitchen, and the ceramic tile has the advantages of dirt resistance, waterproof and moisture-proof, and easy to clean is widely used in the kitchen.

First, tile paving should be budgeted.

A home budget needs to be done before the home is renovated, and tiling in the kitchen also needs to be budgeted in advance. Especially when modern people decorate their houses, they will hand over the kitchen to the decoration company to deal with, and they do not need to go into battle in person, but the decoration company will require the residents to buy tiles by themselves, so it is necessary to pay attention to whether the decoration company falsely reports the amount of tiles, resulting in overspending, so the residents need to do a good job in budgeting.

Second, the tile budget needs to know how high the tile is laid.

When making a tile budget, you need to calculate the area of tiles in the kitchen, and you also need to know the height of tile paving. Generally, the height of the tile will be pasted in the home kitchen, and even some families will be paved to the ceiling. Residents can calculate the number of tiles from the area inside the kitchen, and experienced workers can even calculate the amount of tiles from the height and width of the walls.

Third, the tile budget needs to pay attention to the design requirements.

When paving tiles in the kitchen, you need to pay attention to the style and color of the tile itself, and you also need to pay attention to the combination between the tiles and the tiles, especially for plain tiles, you can buy some bright color tiles and plain tiles for combination paving when paving, so you need to pay attention to this part of the budget when making a tile budget.

Fourth, tile paving is related to the color of the tile.

When it comes to tiles in the kitchen, you need to pay attention to the choice of tile color when you prepare your tile budget. Generally speaking, the kitchen space is not large in the overall space of the house, not to mention the occupation of the kitchen area by various supplies in the kitchen. Therefore, when choosing ceramic tiles, you need to pay attention to the visual effect of the overall space of the tiles.

Generally, when choosing kitchen tiles, you tend to choose light-colored tiles, because light-colored tiles have the effect of expanding the field of vision, and white tiles are used more frequently in the kitchen, and it is not recommended to use white tiles, because the oil in the kitchen is heavy, and the white tiles are not resistant to dirt, and it is difficult to clean.

The most essential thing for a family is to have a kitchen, the kitchen is a place for cooking, so many places will be filled with oil smoke, especially the wall of the kitchen, there are often some oil stains, and people will put tiles in the kitchen for this purpose. The kitchen tiles should be more firm, and there are certain methods and skills for tiling. The ridge tiles in the kitchen are no different from those in other rooms, except that people have to be more careful and deal with some of the corners and corners.

So let's take a look at how the kitchen tiles should be pasted.

How to paste kitchen tiles?

1. Before tiling, soak the tiles in a large basin for 12 hours, and then take them to the shade and place them for 12 hours before the next step of installation.

2. Operating conditions.

After the ground is leveled, do a good job of waterproofing the ground and waterproof protective layer.

Do a good job of installing water and electricity pipelines, and plugging and smoothing scaffolding, eye and pipe holes.

Basin frames, mirror cards, pipe cards, water tanks, gas, etc. should be buried with anti-corrosion wood bricks, and the position should be accurate and accurate.

Uniform pops up a +500mm horizontal line on the wall.

The construction process is as follows:

1) Clean up the base layer, clean up the mortar slag, dust, oil stains, etc. remaining in the base layer, and water and moisten it in advance.

2) 12mm thick 1:3 cement mortar priming, priming should be layered, each layer thickness should be 5 7mm, and then smooth and rub the hair.

3) Wait for the bottom layer to be ashed.

When the sixth and seventh layers are dry, according to the requirements of the drawings, the specifications of the bricks and the actual conditions, the bricks are arranged and the elastic line is carried out.

4) Use 1:3 cement mortar to stick the corner bricks on the ground as a reference point to control the surface flatness of the floor tiles.

5) Bottom ruler, calculate the elevation of the lower mouth of the next brick accurately, the upper skin of the bottom ruler is generally 10mm lower than the ground, and put the bottom ruler on this basis, which should be horizontal and stable.

6) Before the veneer brick, the face brick should be soaked in water for more than 2 hours, and then taken out to dry and set aside.

7) Wipe the 8mm thick cement mixed mortar bonding layer, scrape flat, paste the surface brick with the wipe from top to bottom, require the mortar to be full, remove and repaste when the ash is lost, and check the flatness with a ruler at any time, and ensure that the width of the gap is consistent.

8) After pasting after self-inspection without hollowing, unevenness and straightness, wipe it clean with cotton yarn, wipe the joints with white cement slurry or pat dry cement, wipe the plain slurry in the joints with a cloth, and wipe the brick surface clean.

Many people think that tiling is a difficult job, need a professional decoration team to carry out, in fact, tiling is a need for patience and careful work, as long as you learn the method can be practiced, but the professional team will be more flat than our own paste, they have excellent work experience and time. If you have limited time, you can still ask a professional team, but it costs some money, if you have time, you might as well do it yourself to try it, according to the method you can easily paste the kitchen tiles.

You can get it for free

When decorating, it is inevitable to stick floor tiles. However, it is necessary to pay attention to the construction steps when decorating and paving, otherwise it will be very troublesome to repair more problems after decoration. SoHow to paste kitchen floor tiles?

1. How to paste kitchen floor tiles.

1. How to paste kitchen floor tiles, you need to soak the tiles for 12 hours before tiling, and put them in the shade for 12 hours before they can be installed.

2. How to paste the kitchen floor tiles, before laying the floor tiles, you need to level the ground, and do a good job of water prevention and waterproof protective layer on the ground. Do a good job of water and electricity pipelines and install Wangcheng, and it is also necessary to plug and smooth the feet, hands and holes and pipe holes. Anticorrosive wood bricks should be buried in the basin frame, mirror card, pipe card, water tank, gas, etc., and the position of the sail must be accurate.

3. How to paste the kitchen floor tiles and clean the base layer, you need to clean up the mortar slag, dust, oil and other dirty things that remain in the base layer, and you need to water and moisten them in advance. 12mm thick 1:3 cement mortar priming, note that the priming of the ground needs to be layered, the thickness of each layer is the most suitable in 5 7mm, and at the same time, it is necessary to smooth out the hair.

4. Wait for the bottom layer of ash.

When the sixth and seventh floors are dry, according to the requirements of the design drawings of the house, the specifications of the bricks and the actual conditions of the bricks, the bricks are arranged and the line is stretched. Use 1:3 cement mortar to stick the corner bricks on the ground to make a reference point, in order to be able to control the surface flatness of the floor tiles.

5. It is necessary to wipe the 8mm thick cement mixed mortar bonding layer, scrape flat, pay attention to the surface bricks with the wipe from top to bottom during construction, and also require the mortar to be full, when the ash is lost, we need to remove and re-paste, and at the same time of construction, we need to check the flatness with a ruler at any time, and it is necessary to ensure that the width of the gap is consistent After pasting, check that there is no hollow, uneven, and not straight, wipe it clean with cotton yarn, wipe the joints with white cement slurry or pat dry cement, and wipe the plain slurry in the joints evenly, and wipe the brick surface clean.

Second, what are the skills of laying floor tiles.

1. The floor tile is soaked in water, we must soak in water before paving the floor tile, mainly because there are many small voids inside the floor tile, and these gaps have a certain degree of water absorption.

2. Ground leveling, before laying floor tiles, the ground needs to be leveled in advance, and as far as possible, cement mortar is used to pave the ground, the main purpose of this is to reduce the phenomenon of hollowing and falling off of tiles.

3. Leave joints, we should pay attention to the floor tile paving, we must leave a certain gap between each floor tile, the purpose of this is to prevent the floor tile from warping due to thermal expansion and contraction, if you feel that the gap between the floor tiles will affect the overall effect of the beauty, we can choose to use the caulk to fill it, which can make the floor tile more exquisite.

1. After scraping the old wall, use something to hairen the wall. Make more concave holes so that the bonding performance is good.

2. Clean the brick wall, flatten it with 1:3 cement mortar, grind it flat, and shave it with iron sheet, requiring the wall to be vertical and square at all corners.

3. Use the ink fountain line to pop up the horizontal or vertical line on the wall as a basis.

4. Before pasting the wall tiles, they should be soaked in water for 1-2 hours, and after drying, scrape the cement paper mortar on the back of the tile with a shovel or iron sheet (cement: paper tendon lime = 1: or cement slurry with 107 glue. Paste from bottom to top in the shape of a pint or a field shape.

5. Whenever a row of tiles is paved, a long ruler should be used to check according to the baseline to make the wall smooth and the longitudinal and horizontal joints straight. The gap width should not exceed millimeters.

6. After laying a part of the bricks, wipe the mortar on the surface of the tiles with a dry cloth.

7. Use soft and dry white cement slurry to fill all the tile gaps. Finally, use a dry cloth to smooth out the gaps and wipe the tiles clean.

Before paving, confirm the tiles used everywhere on the kitchen wall and floor to avoid confusion, and remember the line movement of the wire, save the wiring diagram, and facilitate the maintenance to find; If you choose a waistline and tile for kitchen tiles, we should consider the location of the tile waistline, and the waistline is preferably along the floor of the cabinet so as not to be clogged. It does not need to be as good as the ground paste, now there are special wall tiles for sale, and there is the craftsmanship of the tiles must be in place, the bricks can not be hollow, the hollow bricks are easy to break, and the quality is not. Reliable.

It is best not to put tiles at all, because the tiles will be difficult to stick firmly.

Pay attention to the texture of the tile when applying the tile and lay along the texture. Pay attention to the positive and negative directions of the tile waistline so as not to stick. This work needs to be carried out after the tiles have dried completely, at least 24 hours later.

When paving. Pay attention to the slope of the ground, and extend the flood slope in the direction of the floor drain according to a certain slope to avoid water accumulation on the ground.

Pasting kitchen tiles should pay attention to many aspects. The kitchen environment is often more fumey. Many, and belongs to a high temperature environment, it is recommended to choose the color of the tile mainly consider light and cold colors, that is, the order of the store tile and the direction of the store sticker, the general kitchen wall tile paving is to leave the last piece at the bottom, and then begin to spread from the bottom to the top.

It is better not to stick the tiles, because the tiles are difficult to sturdy.

It is recommended to choose antique tiles for the kitchen. When tiling, you must pay attention to the supervisor, and pay attention to the lines of the tiles can not be distorted.

Try not to create too many gaps, budget in advance, try not to choose too small bricks to be sure to tidy up the wall in advance, and also pay attention to the color.

Pasting kitchen tiles is a very critical kitchen tile, before tiling, you must first smooth the wall, try to paste a larger tile, so that it is easier to clean later.

The wall should be made very flat before it fits closely, so that it can have a good effect, and it will be more flat.

If you want to tile your kitchen, you need to pay attention to all aspects, such as preventing water leakage. What are the precautions for tiling in the kitchen? PChouse will take you to find out.

1. Before laying wall tiles in the kitchen, the base should be cleaned before leveling and tiling, such as lime paste, latex paint, wallpaper and other decorations on the wall, or there is dirt on the ground, it must be cleaned up, otherwise the cement mortar and the base layer are not firmly bonded; In addition, if there are cracks in the wall itself, it should be properly treated before tiling, so as to avoid cracking or falling off the wall tiles due to the enlargement of the cracks in the basic structure in the future; There are also cement walls to be brushed, and for the ground and wall with too large a gap in flatness or verticality, cement mortar should be used for leveling.

2. The laying sequence should pay attention to the wall tiles should be paved from the bottom up, and the bottom bricks should be pasted back for the sake of beauty. After the wall tiles are pasted, press the floor tiles, and when there is half a brick, it should be placed below as much as possible. In addition, a wall should not be pasted to the top at one time to prevent the tile from falling due to its large weight.

3. Choose better quality cement sand The choice of cement sand is the basis of the wall tile paving project, if you want to have a good wall tile paving effect, you must choose a higher quality sand, only in this way the wall tiles will be connected tightly with the wall. When we choose cement sand, we must check whether it has QS certification to see if it exceeds or is close to the expiration date. It is best to choose river sand for sand, mainly because the water content of river sand is larger, and the paste effect is better.