The newly installed telecom 100 megabyte, mobile phones and pads can be on, and my mother s mobile p

Hello, like this is generally a problem with the phone's wifi signal receiver.

You follow the steps below to set up the wifi again

1.Turn on the power supply, and then plug in the network cable, plug the line into the WAN port (usually the blue port), and then connect with the computer network cable just plug in which LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if you are using ** online Internet access at home, then you have to prepare an additional modem, commonly known as "cat").

2.Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

5.If you choose PPPOE dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in!!

6.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

Hope mine is helpful to you.

The reasons why the iPad is connected to wifi but can't access the Internet are:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. iPad system problem, there may be a problem with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

1. If you can't access the Internet, please try to turn off and restart; Please check whether the maximum flow rate threshold for this month has been reached; Please check whether your phone settings mobile data is turned on; Set the mobile data option APN and whether the name is set to 3GNET.

2. If you still can't access the Internet, it is recommended that you troubleshoot in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

In case of traffic capping, it will also lead to the inability to access the Internet;

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

3. If the above situation is not the case, it is recommended that you contact the manual customer service of Unicom in the place where you belong for consultation, and the actual situation is subject to the local policy.

The IP address is not recognized, or you have used other ones before and now conflict, you don't save this wifi, re-enter the password to enter, then open the network connection, reset the adapter!

Is your router set up to automatically assign IP, if so, check your pad's network settings, and select auto-assign all in the IP filling part. Hope!

Check to see if the mini2 uses a static address.

DNS error. Wireless router DNS configuration method:

1. Enter the IP address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page.

2. In the running state, we need to see our current DNS here. Search the local DNS address of the broadband operator you are using online to see if it is the same, if not, you need to change it.

4. Just tick the button to set up the DNS server, and then enter the DNS address of the local broadband operator you use.

The mobile phone clearly shows that it is connected to WiFi, but it can't connect to the Internet?

Mobile phone connected to wifi but can't connect to the Internet?

If the broadband is not available, please first confirm whether the broadband is suspended due to arrears, and if so, please recharge first.

If the mobile broadband fails due to non-arrears, we recommend that you perform the following operations:

Restart the modem and plug the fiber connector back in before surfing the Internet.

Determine the status of the modem indicator, for example, whether the WAN indicator is solid or flashing when the port is connected to the modem normally;

Remove the router, create a broadband connection, and reconfigure the router;

If the above methods still do not solve the problem, you can call the local 10086 to report the broadband fault.

On your phone's screen, find your phone's Settings icon and tap to turn it on.

After entering the settings interface of your phone, find the [Connect] option in the interface and click to enter.

After entering the connection interface of the mobile phone, find the [Wi-Fi] option in the interface and click to enter.

After entering the Wi-Fi page of the mobile phone, turn the Wi-Fi function on/off.

After the Wi-Fi function of the phone is turned on, find the [ ] icon in the upper right corner of the interface and touch to turn it on.

Mobile phone repair assistant.

Tianji quick check maintenance assistant.

Smart applets.

In the pop-up interface, find the [Advanced Settings] option and click to enter.

In the advanced settings interface of WLAN, find the [Save WLAN during sleep on] function, click it, and finally select the [Never] option in the pop-up interface.

Make sure your router is turned on and that you're within range of your router's coverage.

If you are too far away from the router, you will not be able to get the signal from the router. Make sure that your location is within the range covered by the router, that the wifi signal can be searched, and that the signal is stable.

Check for problems with the wifi network.

Make sure your router is connected and turned on.

Make sure your router server doesn't have a set limit. For example, if you set MAC address or IP address filtering permissions to prohibit your phone from connecting to Wi-Fi, you need to modify the relevant configuration of the router or contact the router administrator to deal with it.

After restarting the router, phone, see if the problem is fixed.

If your WiFi network is set up by someone else, ask them for help. If you're using a network for work, school, hotel, store, or other free Wi-Fi location, ask their staff for help.

If you are unable to use the wifi network with another device, the service may have been interrupted. Call your communications company or internet provider for assistance.

Try to use it while connecting to a different wifi. If your phone can't connect to any WiFi network, you can go to the OPPO service center to deal with it.

Samsung phones are generally recommended to do the following:

1.Turn off the handset, reset the router, and then reconnect to the wireless network.

2.Please confirm.

Mine is the same, it's a quality issue.

The cause of the failure may be: mobile phone problem, mobile phone forgot or ignored wifi, shut down and restart, search for wifi again, enter the password to verify and log in; If there is a problem with the wireless router, turn off the wireless router for a few minutes and restart it to see if the mobile phone is connected to the Internet normally; Mobile phone system problems, backup mobile phone related data, factory reset the mobile phone, and then why the wifi is connected but can't access the network, other people's mobile phones can.

Mobile phone connected to wifi but can't connect to the Internet?

Hello, first of all, thank you for your support to China Telecom. I hope the following can be helpful to you, please test the network speed in the online business hall of China Telecom to see if it can reach the speed you signed up, indicating that it is a wireless router problem, you can restore the router to the factory value test.

The reply is for reference only, please consult 10000 or log in to Anhui Telecom online business hall shall prevail, Anhui Telecom will serve you wholeheartedly, I hope I can get yours. Anhui Telecom's "Deposit to the Bank 0 Yuan to Get a Mobile Phone" activity is online! Go to the bank's activity outlets with your ID card and bank card to handle the deposit and get your mobile phone business for free.

As long as you deposit money in the bank, and at the same time promise the mobile phone ** guaranteed consumption and network time, Anhui Telecom will give you a free mobile phone, and at the same time the deposit can also get interest. For more information, please visit the online business hall of Anhui Telecom.

The distance is too far away or the router is set with a limit.