After the WAN port of the wireless router is set with a static IP, the machine in the upper LAN cann

You can use the route as an exchange, that is, the access line, connect to the LAN port, and then change the DHCP address to your original network segment address, or close the DHCP server, and manually fill in the IP address after the laptop wireless access.

Of course the router doesn't work, the router is not broadcasting, how you set it up is useless, the solution is simple, just replace the router with a switch.

The router can be used as a switch, and the network cable of the unit is not plugged into the WLAN, but plugged into the LAN port, then your router will become a wireless switch, and this is how I use it. If you connect to the computer again, plug it directly into the LAN port. The settings of the machine do not need to be changed, your laptop is set according to the IP of the unit, so that you can directly connect to the wireless connection and the LAN can also be connected.

Let's take a look at the LAN port of the router with the unit network cable.

Your laptop is connected to the router, the router is not connected to the unit network cable, enter the settings, static or something; Wireless is also set up; Turn on the DHCP of the router and save.

Then the unit network cable enters the LAN port of the router, which should be fine.

The LAN cable is directly connected to the LAN port of the router, and the IP of the LAN port of the router is set to the IP of the same network segment as your LAN or not set, and the dynamic DHCP function in the router must be disabled.

Set it to a dynamic IP address

It should work.

Connect the wireless router with a static IP method, which means that your computer has been connected to the Internet through the external network, and it is connected to the Internet by entering the specified IP in the local connection, not by connecting to broadband Internet access, and now you need to add a wireless router, be sure to see clearly. First, insert the network cable from the external network into the WAN port of the router, and then select a plug-in network cable from the four LAN ports of the router to connect it with the network card of the computer.

After connecting the router network cable to the computer, open the computer browser, enter and press enter to enter the router settings interface, some routers are, you need to enter the user name and password to enter the router settings interface.

Due to the different types of routers, the setting interface of the router is also different, but most of the setting connection methods are the same, and the functions are similar. Take mine as an example, after entering the settings interface, you will go directly to the one-click setup and installation router, and some routers are setup wizards, in fact, the principle is the same. Set the Internet Access Type to Static IP Address

Fill in the correct IP address and other information in the following **, here is the setting when your computer connects to the Internet through the specified IP address, you must fill in the correct information, otherwise the router will not be able to connect to the Internet and will not be able to access the Internet normally.

Okay, the external network connection has been set, and then pull down to set up the wireless network, you can change the name of the wireless network by yourself, set the password of the wireless network, and click Save to take effect.

If you can't surf the Internet normally after setting it up, restart your router. If you still can't access the Internet after restarting, find the MAC address clone option in the external network configuration, click on the clone MAC address at the back, and click Save to take effect after the address change in **Restart the router to surf the Internet normally.

That static address is routed, and your address is still assigned by the wireless router, which should be fine.

It's the router that is bound to the mic, and only the administrator can change it, or you reset the router to go,

To see if your computer and router are on the same network segment, you must first be able to ping.