How to set the WAN port of the router and how to set the WAN port of the wireless routing network pa

The router you bought has a manual inside, and different router settings are different.

There are two scenarios:

The details are as follows: The regional modem itself does not have a routing function, and directly connects the modem to the router WAN port with a network cable.

Note: Some areas use 8545M and 8321R, except for those that can be enabled in the background.

The router sets up the dial-up connection (PPPOE), input, password; Then set the wireless name and save the password.

If it is a regular telecom, mobile, or China Unicom optical modem, most of them have already enabled the routing function; That is to say, you can also connect to wifi without a router, and then add a router to set it up in 2 steps.

First, the router is not connected to the optical modem, directly enter the management interface, set the way to automatically obtain the IP, and then set the wifi name, password, and save.

Second, reconnect to the WiFi, enter the management interface again, and set the LAN port IP (to prevent conflicts with the optical modem IP, resulting in Internet access at that time, but you can't access it after a period of time).

After setting OK, save it, and then connect the modem to the router to use.

Wireless router WAN port parameter setting method:

1.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

2.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband password, and select Automatic connection as the connection mode.

DHCP is automatically obtained, and no other settings need to be modified.

For enterprise networks, with the increase in the number of users, its network applications are also more and more, when everyone uses a network cable, it is obvious that the network speed is getting slower and slower, if you can add one more line access, then you can greatly improve the speed of the Internet, due to the birth of multi-WAN port routers. Next, I will teach you how to set up the router WAN port, I hope it will help you.

1. The multi-WAN port router needs to process a large amount of data

Therefore, most of the processing chips with strong capabilities are used to prevent bandwidth abuse and malicious attacks, and can more comprehensively solve the needs of bandwidth upgrades, and the purpose of multi-WAN routers is basically the same as that of single-WAN routers, which is to connect the interface between the internal network and the public network and provide firewall function services, but there is an additional Ethernet address that can be used for a second Internet connection. It can control traffic load balancing with built-in intelligent management.

Second, multi-WAN port connection is generally used

The second connection mode is better different from the first connection mode, using different operators, so that different operators can backup each other, generally telecom and Netcom, which is caused by many insufficient bandwidth problems caused by insufficient bandwidth of cross-network operators.

3. When investing in the establishment of a new dual-WAN port router

The user must be very clear that they can actually have a second connection, because in some places there may not be a second line, or there is no network with another operator, and the user will not be able to provide the service even if he is willing to pay.

4. Cisco routers have built-in powerful and efficient network processors

Compared with the basic dual-WAN router, Cisco routers provide many additional features, such as bandwidth limiting function to solve the BT** problem, full Chinese configuration interface, load balancing of different WAN ports, etc., which is very suitable for small and medium-sized enterprises, offices, branch offices and organizations with broadband access needs.

5. Cisco routers also support bandwidth management functions

Multiple sets of access rules can be set to manage internal and external connections. Administrators can limit network usage by IP or service port to double the unblocking efficiency, and can arbitrarily set the settings to ensure bandwidth, maximum bandwidth and priority.

Sixth, for most users

The router can start working and balancing the load according to its basic settings, if necessary, you can adjust the load balancing, backup function attributes, bandwidth management and firewall functions by setting the interface, which can make the use of bandwidth more efficient, users can select relevant attributes on the status page of the router to detect their status from time to time, and can also see the status of its WAN connection and the distribution of traffic.

There is no problem that the WAN port can't solve, if there is, then expand the WAN, let's see how to set up the router WAN I brought!

1 "Local Connection" on the computer - select "Automatically obtain IP address", then open the browser, enter, and enter the router interface.

2 Before the specific settings, let's take a look at the router network interfaces with different WAN ports, as shown in the following figure

Schematic diagram of the network card interface of the four-WAN port router.

Schematic diagram of the network card interface of a dual-WAN router.

3 When we don't need so many WAN ports, we can set the number of ports we need in the Advanced Management --- WAN Port Settings, and after modifying the number of WAN ports, we need to restart the router to work. As shown below:

Note: Soft routes do not have this feature.

Default WAN port order:

lan---wan1---wan2—wan3—wan4 (quadruple wan).

lan1---lan2--- lan3—wan1—wan2 (dual wan).

If the number is changed to three, the order of the router's WAN ports will be changed to:

lan1---lan2---wan1—wan2—wan3；

If the number is changed to two, the order of the router's WAN ports will be changed to:

lan1---lan2---lan3—wan1—wan2；

If the order is changed to one, the order of the router's WAN ports will be:

lan1---lan2---lan3—lan4—wan

The above is how to set the number of WAN ports in WayOS routers.

Finally, I would like to remind you that during the setup process, when the WayOS router is modified to a WAN port, the policy route will be automatically hidden and not displayed.