Can I connect another optical modem if the optical fiber is removed and the optical fiber is left?

Of course, this is not possible, one fiber with one optical modem. Target.

As long as the broadband is not logged out, you can still use another modem (which must support the broadband of the same broadband provider). But if it's logged out, then it's useless to pick it up. In addition, when handling the new broadband, the installer will re-pull the cable, and will not use the original fiber optic cable.

Of course. The optical modem is used as a terminal and can be connected to the home after the password is activated. If you remove the original modem and reconnect to the new modem, you must go to the service provider to open a new one.

Your light and always leave fiber, you can connect to another vast, but then you have to open this network through a mobile company for you to use in the county.

It doesn't matter if the optical modem is gone, if this is only an optical fiber, it can be connected to another optical modem, as long as there is this line that can be used, you can contact the customer service staff of the business hall, and the staff can come to the door.

Of course, it is possible to remove the optical fiber and leave the optical fiber to be closed by another cat, of course, because as long as there is an optical fiber waiting, it is no problem to go, and it is also possible to have a network to connect to another optical modem.

As soon as the optical modem leaves, leaving the optical fiber, of course, this can identify an optical modem, this case. There is nothing wrong with that.

The modem has gone, leaving the optical fiber, and of course you can connect to another modem. However, the interface of the optical modem should be exactly the same as the original interface. And the other end of the light cat must be operated by the company to open financial management.

Yes, as long as the optical fiber has a network, it can be connected, and if another optical modem is like this, the effect is the same, mainly depending on the signal transmission of the optical modem, whether the ability is strong or not.

The optical modem has gone, can I still connect another optical modem if I leave the optical fiber? Theoretically, yes, but each modem needs to contact the operating company, for example, Unicom can only use Unicom, and the modem can only use the mobile modem.

Of course you can.,It's a tool.,It's like a router, and it's okay if you change a router.,But you can use it.。

That's okay, of course this one can be picked up with another one, it doesn't matter much.

Yes, as long as your light has traffic and there is no arrears, then you can use it if you change it to another light cat, and my original light cat can be used if it is broken.

:OK. The so-called optical modem is a photoelectric converter, which can convert light into electricity, and can also convert electricity into light, which is basically used in pairs.

The modem has gone, leaving the optical fiber, and wants to pick up another modem. The same model and the same specifications are required. Otherwise, it can't be connected.

The optical modem can be replaced and the optical fiber connection is removed, and another new one is also very good.

This is definitely possible, because the optical modem belongs to a device from the outside world, and it can be changed as long as there is no problem with the optical fiber.

Yes, it can be accessed, as long as it belongs to the same optical signal.

The light cat does not scan the code, the home with the customer number, and the other can also be, but you have to contact the service customer service.

:OK. This is the hardware.

Can be replaced. It's okay if it's broken.

The light sweater goes, can I still connect another optical cat if I leave the optical fiber? He doesn't need it, because the light cat can only work normally, and it doesn't need to.

The optical modem can be connected to another optical modem if the optical fiber is removed, but the optical modem must be reopened and can only be used after recharging.

I think the modem is gone, and if you leave the fiber, of course, you can connect to another modem, but you need to use the connecting cable.

This kind of is okay, because there is no necessary connection between them, and you can change the cat.

Of course you can. As long as your network cable is normal, then you can connect it through the settings.

If the optical cat is removed and the optical fiber is left, it can be used to connect another optical modem, as long as the wiring is correct, but it is better for a professional to get it.

Well, like you said that if you leave the optical fiber as soon as the light cat leaves, you should pick up another mama, this crop is okay, and it's completely fine to pick up the other one.

If one modem leaves optical fibers, can it be connected to another optical modem? This should be no problem, you can use the way in series, just connect the holes at the bottom.

Of course, if this optical modem is not used, and the erbium fiber is not in arrears, of course it can be used to replace it with an optical modem.

If this modem is gone, if this one is only an optical fiber, it can be connected to another modem, as long as this cable can be used.

Brand model: Huawei MateBook D15

System: Windows 11

If an optical fiber cannot be connected to two optical modems, only one optical fiber modem, but multiple routers can be connected, just connect the router to the network port of the optical fiber modem, and then enter the router settings page separately to set up a block and set it up. Optical fiber is an abbreviation for optical fiber, which is a fiber made of glass or plastic that acts as a light conduction tool. The tiny fiber is encapsulated in a plastic sheath that allows it to bend without breaking.

Typically, a transmitter at one end of the fiber uses a light emitting diode (LED) or a laser beam to deliver light pulses to the fiber, and a receiver at the other end of the fiber uses a photosensitive element to detect the pulses.

The steps to connect two routers with one fiber are as follows:

1. Set up the telecom optical modem: First of all, set up the telecom optical fiber modem so that it can access the Internet.

2. Set up Router 1: Log in to the router interface in the browser and enter the username and password.

3. In the router settings interface, select the Internet setting option.

4. In the Internet settings window, select the static IP option.

5. Set the IP address to and the gateway to .

6. Then, set the DNS address and note that it is different for different broadbands.

7. Click the Advanced Settings button and select the intranet setting option.

8. In the advanced settings window, select the LAN port setting option and change the LAN port IP address to.

10. Select the LAN port setting option in Advanced Settings and change the IP address of the LAN port to Brief Notice.

11. Finally, connect both routers to the telecom fiber modem, and that's it.

Summary. Hello, I'm honored to answer for you, there are two optical fibers and two optical fiber cats, and the two optical modems cannot be used interchangeably. The modem must register with the operator's equipment room device.

If there are two optical fibers and two optical fiber cats at home, can the two optical fiber cats be used interchangeably?

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello, I'm honored to answer for you, there are two optical fibers and two optical fiber cats, and the two optical cats cannot be used interchangeably. The modem must register with the operator's equipment room to be wide-spoken.

Optical modem is divided according to the Internet function,Roughly divided into wired Internet access and wireless Internet access,First of all, wired Internet access,As the name suggests, it is a finch lead Nian can only be connected to the Internet locally,Can't use wifi to surf the Internet; The optical modem of wireless Internet access has a routing function, which can transmit wifi signals, with a single frequency of 300m and a dual frequency of 1200m, which is a meaning of the dual-band wifi of the router.

I hope the above helps you If you are satisfied with me, please move your fingers and give a thumbs up Thank you, I wish you a good life

After the optical modem is unplugged from the optical fiber cable in a different position, it will not affect the Internet access if it is plugged back into the original interface.

Optical modem wiring method:

1. First of all, the socket connection of the telecom optical fiber to the home line and the optical fiber modem is accurate, and the connection method is connected according to the following figure.

2. The next step is to set up wirelessly: there will be a label on the back of the fiber optic modem, don't tear off the label, it is marked with the default login IP address (the browser used to log in) and the user name and password.

3. Open the browser on the computer, enter the IP address on the back in the address bar (directly enter the numbers and punctuation points and then click enter to enter**), enter the username and password on the back of the fiber modem in the login box, and click the user login.

4. Configure the logical ID and password, which belongs to the official certification, do not change it at will. Just leave it in its default state.

5. The second is to configure the voice service, which is also officially set and cannot be changed by the user at will.

6. To configure a broadband connection, you first need to keep in mind the number of the place circled by the red line below, and the number is different for each person; Then change your settings according to the image below, only the red circle needs to use your own number.

7. Then set the wireless configuration, first of all, select the wireless switch (that is, check behind the [wireless switch] option) to turn on, and the rest remain unchanged, do not change the settings.

8. The configuration of IPTV does not need to be replaced, it is set by the official, and changing it may cause problems in the network.

An optical fiber can not be connected to two optical modems, an optical fiber can not be divided into two cats, two at the same time Internet access, if you want to achieve two computers at the same time with optical fiber Internet access, you can install a wireless router.

Optical modem, also known as optical modem, refers to a network device that transmits optical signals through optical fiber media and modulates and demodulates optical signals into other protocol signals, and is a relay transmission equipment for large local area networks, metropolitan area networks and wide area networks. The device is composed of transmitting, receiving, control, interface and power supply, using large-scale integrated chips, simple circuit, low power consumption, high reliability, complete alarm status indication and perfect network management function.

Optical fiber communication has rapidly developed into the main form of information transmission today because of its advantages of frequency bandwidth and large capacity, and optical modem must be modulated and demodulated to achieve optical communication, so as a key component of optical fiber communication system, optical modem is receiving more and more attention. There are two types of optical modulators: direct modulators and external modulators, and optical demodulators are divided into two types: with and without built-in front amplifiers. The direct modulator and the demodulator with built-in preamplifier are the research focus of this project, and the direct state connection modulation has the advantages of simplicity, economy and easy implementation, while the demodulator with built-in preamplifier has the characteristics of high integration and small size.

The optical modem connects to the optical fiber and requires special equipment. If you want an operator** to set up the data, you can't get it yourself.

No, you can install the hardware, and you don't have permission to open it in the background, so urge it.

Can I continue to use the fiber broadband cat left behind by someone else's move?

Usually cats can be general, and China Telecom and Unicom will not do customized development and restrictions, but only use them directly from manufacturers. However, the parameter configuration of the cat should be matched with the configuration in the telecom or Unicom computer room, such as the setting of PCI VCI and so on.

The cat is also called the modulation modem, is a device for signal conversion between the computer and the first line, composed of two parts, the modulator and the demodulator, the modulator is the digital signal of the computer (such as files, etc.) is modulated into the sound signal that can be transmitted on the first line, at the receiving end, the demodulator converts the sound signal into a digital signal that the computer can receive. Data communication between computers can be realized through a modem and a ** line.