Can I get more than one cable broadband in one bedroom?

This is possible, after you enter the telecom broadband home, it is divided into multiple network cables through routers, switches and other equipment, and you can install multiple lines in the bedroom as needed. Web Links.

Customer service 32 will answer for you. The daily rental version of the star card will get 20 yuan of phone bills, 200G star card exclusive directional traffic package, swiping **, playing the whole network, easier and more free, details can be viewed in the online business hall of Guangxi Telecom.

Generally, there is one broadband in one broadband, and some high convergence may have two broadbands, and if you want to pull multiple telecom broadbands in the same bedroom, you need to handle multiple broadbands**. It's about having enough fiber optic interfaces at the location.

Multiple broadband can be installed in a home. Now there are such routers that can be connected to dual broadband.

A broadband can have multiple interfaces, this interface can only be pulled by yourself or a professional, the person who installs the broadband is not responsible for this, you can also buy a wireless router, the whole house does not need to pull the cable, it is more convenient and faster to connect the terminal equipment with a wireless router.

Of course, you can get your own Internet café. The question is whether it will get stuck. There are also enough routing ports.

Generally, the community will only connect to 1-2 communication providers, if the community has two wires, you can install two broadband.

Operators don't care how many bedrooms you have, right? Generally, it is counted as one house, and there is no limit to the number normally.

Do you want to pack multiple broadband cables or take the network cable in your own room? You can install the network cable however you want.

**Two broadband bands are available. OK.

If the No. 1 network cable is suspended, you can directly use the No. 2 network cable, and the user can also choose a good signal Internet line, open the network cable of the same service, and use someone else's ID card to re-open it. The traditional ** wire system uses the low-frequency portion of the copper wire (below 4kHz).

ADSL uses DMT (Discrete Multi-Audio) technology to divide the original ** line OKHZ to the frequency band into 256 sub-frequency bands with a frequency width. Among them, the frequency band below 4kHz is used to transmit POTS (traditional ** service), the frequency band from 20kHz to 138kHz is used to transmit uplink signals, and the frequency band to 138kHz is used to transmit downlink signals.

Extended Information: Precautions for the Use of Telecom Dual Broadband:

Compared with the general network cable installation, the optical fiber broadband installation has a more complex process technology. When installing the wide trapped belt of the optical fiber, the two ends of the optical fiber must be cut by the staff with professional tools. And make sure that both ends are smooth, so that it does not lead to a decrease in the signal.

Usually, before the installation of optical fiber broadband, a magnifying glass or microscope must be used to observe and detect that the cutting state of the end of the optical fiber is very smooth.

When the fiber connector is installed and connected, certain protective measures should be taken. Since the connector is installed in a way that leaks the received signal, it is easy to weaken the received signal if protection measures are not taken that meet the standards.

Hello, some telecommunications ** can add a second broadband, but the second broadband needs to be installed in other places to use, in addition to the second broadband generally needs to charge an additional fee, please consult the local telecom business hall for details. For more services, discounts, etc., you can pay attention to Anhui Telecom's WeChat*** view.

Part** can add two broadbands, but can not be installed at the same address, you can consult the local telecom business hall for details. Handling 5G is one step faster, the traffic is half cheaper than 4G, the broadband speed is 500M, and it is convenient and fast to log in to the online business hall of Guangxi Telecom to handle broadband, number card, traffic package, etc. with one click. Customer service 192 will answer for you.

Telecom broadband can only install one broadband at the same address, multiple usernames are not possible, and there should be only one line entrance that should be reserved for each address, and the allocation of resources is also limited.

Hello Telecom dual broadband refers to the fact that two broadband can be enjoyed within **. It is theoretically possible to have two broadband bands in one room if the line allows.

This means broadband with two types of RF, and the two frequencies are different. The network speed is slower, the ability to penetrate walls is strong, and the coverage is wider. The 5G network speed is fast and the signal is stable, but the ability to penetrate the wall is poor, and the coverage is small!

It is recommended that you call the local 10000 number for consultation, and the policy may vary from place to place.

It is possible to install two telecom broadbands, which need to be handled with two different ID cards.

China Telecom's broadband network is connected to the national 100 backbone network with a bandwidth of more than 1000G (note: G is the bandwidth unit, 1G = 1024M [mega]), and is directly interconnected with core nodes such as Shanghai, Guangzhou, Nanjing, and Wuhan.

It's not necessary, you upgrade the original bandwidth **, it's best to upgrade to 4m, 4m broadband, 5 people are enough, if someone uses a notebook, buy a 4-port wireless router, within a hundred, wireless can be connected to several, wired has 4 interfaces. If it's all desktops, buy an 8-port router.

Four people can pull a 4m network cable, and the average person can go down about 1m. Then you can install a wireless router to implement unlimited LAN network, and the range is determined according to the power of the network cable router. Installing two network cables is a bit of a hassle.

It's best not to use wireless, it's very annoying intermittently.

In addition, you need to call **, such as Telecom or Tietong, to see if they have outlets in the community where you live, so that you can know if you can pull the network cable.

That's right.

It's better to change it** 5 people use 4m.

Use the router to allocate how much network speed a machine has.

If you want to pull, telecom will definitely pull for you, telecom, Unicom who is good depends on the actual situation in each place, but usually the network speed of telecommunications is more stable than that of Unicom, but the service is usually worse.

In fact, why do you need two network cables, just increase the bandwidth, it is much easier to use than two cables. For example, if you have 2M bandwidth for one person, but you can use up to 4M bandwidth, wireless charges are expensive, most of them include traffic, and it is best not to use them unless you have special circumstances or rich people.

Telecom in Lagan 4m is it.