How to Adjust Car Mirrors Correctly, The Right Way to Adjust Car Mirrors

The correct way to adjust the rearview mirrors:

1.The left side mirror sees a quarter of the body, and the horizon line should be in the middle of the mirror.

2.In the right-hand mirror, you can also see a quarter of the body, with the sky taking up one-third and the ground two-thirds.

3.Inside, the rearview mirrors are split between the sky and the ground. You can see what is going on behind the car through the window.

Correct adjustment of the rearview mirror in order to minimize the blind spot, driving is no trivial matter, safety is greater than the day, of course, the above is just a way to learn from, do not follow the script, according to their actual situation and self-awareness standards, because the rearview mirror viewing angle and field of vision of each car are not the same.

1.Adjust the position of your seat and steering wheel to ensure that your vision can be well observed in the rearview mirror.

2.First, adjust the mirrors in the car, adjust the horizon image inside to the mirror**, and adjust the vehicle you see on the right to the left.

3.Adjust the mirror on the left side of the car, adjust the things in the audition to the ** position, and adjust the image of the left body to occupy the area of 1 4 on the right side of the mirror.

4.Adjust the mirror on the right side of the car so that the image is two-thirds of the way up to the audition, and adjust the rightmost part of the mirror to a quarter of the way.

First of all, sit in a driving position that is usually more accustomed to driving, operate the rearview mirror control key to make the left rearview mirror translate up and down, until the heaven and earth in the rearview mirror each occupy about 1 2, and then control the left and right translation of the rearview mirror, so that the rear of the body occupies about 1 4 of the rear-view mirror (try not to exceed 1 4), and the adjustment of the right rear-view mirror can refer to the method on the left. In this way, it is possible to observe the trajectory of the vehicle in the distance behind and the rear of the vehicle when reversing.

If a novice can't see the running status of the rear wheels when reversing, then it is recommended that you go to a car accessories store and buy a pair of small round mirrors to stick in the appropriate position of the rearview mirror, which is very practical for novices.

1. First of all, you must adjust the driver's seat to the most comfortable driving position, and then you can adjust the rearview mirror. In order to cope with the test, many driving schools tell students how to adjust the rearview mirror must be applicable to the real road surface. We have sorted out a more reliable rearview mirror adjustment method, and the rearview mirror can be adjusted to reduce blind spots and reduce the risk of driving.

Adjustment of the left side mirror.

The upper and lower positions are to place the distant horizon in **, and the left and right positions are adjusted to the 1 4 of the mirror range occupied by the body.

2, the adjustment of the mirror because the driver's seat is on the left side, so the driver is difficult to grasp the situation on the right side of the body, therefore, when the right rearview mirror adjusts the upper and lower positions, the ground area should be larger, accounting for about 2 3 of the mirror area, and the left and right positions are also adjusted to the 1 4 of the body occupying the mirror range.

3. Adjustment of the mirror.

The left and right positions are adjusted to the left edge of the mirror, cut to the right ear of the image in the mirror, under normal circumstances, you can't see yourself from the rearview mirror, and the upper and lower positions are to put the distant horizon in the mirror. The key points of adjustment are: horizontal pendulum in the middle, ear to the left, that is, the distant horizontal line is placed horizontally in the middle line of the rearview mirror, and then move left and right, and put the image of your right ear on the left edge of the mirror.

The correct way to adjust the rearview mirrors:

1. Adjust the inner rearview mirror: adjust the horizon reflection in the rearview mirror to the mirror, and adjust the reflection of your right ear to the left edge of the mirror.

2. Adjust the left exterior mirror: adjust the horizon image in the rearview mirror to the mirror**, and adjust the image of the left body to occupy the area of 1 4 on the right side of the mirror. 3. Adjust the right exterior mirror

The horizon image in the rearview mirror should be adjusted to 2 3 at the height of the mirror, and the image of the right side of the car body should be adjusted to occupy the area of 1 4 on the left side of the mirror. Having the image on the ground occupy more of the right-hand mirror area makes it easier for the driver to grasp the road conditions on the right side of the vehicle and the distance between the vehicle and the road when pulling over.

Adjust the standard sitting position first, and then adjust the mirror. 1. **Rearview mirror: The left and right positions are adjusted to the left edge of the mirror and cut to the right ear of the image in the mirror, which means that in general driving situations, you can't see yourself from the rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror.

2. Left side mirror: the upper and lower positions are to put the distant horizon in the distance, and the left and right positions are adjusted to the body to occupy the mirror range of 1 4. 3. Right rearview mirror:

Because the driver's seat is located on the left side, so the driver's grasp of the right side of the car ear is not so easy, coupled with the need to sometimes stop on the side of the road, the ground area in the right rearview mirror when adjusting the upper and lower positions should be larger, accounting for about 2 3 of the mirror surface. The left and right positions are also adjusted to the body occupies 1 4 area.

The adjustment method of the rearview mirror is incorrect, which can easily lead to the appearance of blind spots and cause accidents. Next, I will teach you how to adjust the rearview mirror correctly, but you should remember it well. In life, it is common to encounter the results of two types of adjusting the rearview mirror.

First, the overlap angle of the inner and outer rearview mirrors is too large, resulting in a narrow field of vision. The second is that the blind spot angle of the internal and external rearview mirrors is too large, resulting in a blind angle of vision.

In both cases, there will be hidden dangers in the process of driving.

Left mirror adjustment.

The left exterior mirror adjustment should be half of the top and bottom, that is, the ratio of 1:1 between heaven and earth, left 3 4 right 1 4 (1 4 area close to the body), you can see the door handle of the rear door.

Right mirror adjustment.

Because the right side is farther away from the driver, the right side of the exterior mirror adjustment is slightly different from the left side, the right side of the mirror adjustment should be up 1 4 down 3 4, left 1 4 right 3 4 (1 4 area close to the body), you can see the door handle of the rear door.

**Rearview mirror adjustment.

**Three points should be paid attention to when adjusting the rearview mirror: first, the right ear is visible on the left edge of the mirror; Second, the entire rear windshield is in the inner mirror; Third, the ratio between heaven and earth in the distance is 1:1.

Proper adjustment of the rearview mirror is really important for safe driving. Friends must remember!

A normal driver can see about 200 degrees left and right in front of him without looking back, in other words, about 160 degrees is invisible, so we must treat our good helper - the rearview mirror.

Specifically**rearview mirror, adjust the left and right positions to the left edge of the mirror just to cut to the right ear of your image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon in the mirror**.

Next is the left side mirror, which needs to be placed in the upper and lower positions to put the distant horizon in **, and the left and right positions are adjusted to 1 4 in the mirror range occupied by the body.

Because the driver's seat is located on the left side, so the driver's grasp of the right side of the car ear is not so easy, coupled with the need to sometimes stop on the side of the road, the ground area in the right rearview mirror when adjusting the upper and lower positions should be larger, accounting for about 2 3 of the mirror surface. The left and right positions are also adjusted to the body occupies 1 4 area.

When driving at high speeds, the driving school may have more blind spots than you expected, but it is not something that can be covered by just three rearview mirrors, so whether you are switching lanes or turning left and right, you should pay more attention to the rearview mirror!

Carefully grasp the above points, your driving is not harmful, and finally a wordy sentence, you must regularly check the road conditions through the rearview mirror during the road test, otherwise, the examiner will judge that there is a lack of awareness of safe driving school.

The rearview mirror is a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries have stipulated that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

Get in the driver's seat of the car, adjust your body position, and find a position that you feel most comfortable and easy to drive, and this sitting position must be able to easily step on the accelerator and brake.

The first adjustment is the left rearview mirror, the upper and lower positions of the left rearview mirror are adjusted to see half of the sky and the earth from the rearview mirror, and the left and right positions are adjusted to the body accounts for about a quarter of the left rearview mirror.

The left and right positions of the right rearview mirror are also occupied by the body in a quarter, the difference is that the right rearview mirror occupies two-thirds, and the sky only occupies one-third.

Because the driving position is on the left side of the car, the line of sight is somewhat biased, and only the rearview mirror adjusted to this state can see the car on the right.

Right and wrong ways to adjust your mirrors: Not every old driver can adjust their mirrors, let alone new ones. Today, we're going to talk about the adjustment of the rearview mirror.

The rearview mirror of the car, which we must use every time we drive, reflects the situation in the rear, side and lower part of the car, allowing the driver to see these positions indirectly, expanding the driver's field of vision, and people who drive often look through the rearview mirror no less than a hundred times a day. For this reason, car mirrors are also known as the driver's "second eyes". However, for novice drivers, they did not learn how to adjust the rearview mirror well when they were in driving school, or they did not know how to observe the rearview mirror, which will leave a great safety hazard when driving.

So today, let's talk about how to adjust the rearview mirror correctly and some issues that need to be paid attention to.

At present, there are three types of rearview mirrors that are standard in conventional cars on the market: left, right and interior rearview mirrors. With these three mirrors, our field of view can be expanded by about 60 degrees, and with the 200-degree field of view of the human eye, the driver's field of view in the car is about 260 degrees. The remaining range of about 100 degrees is called the blind spot of early bending.

Therefore, by correctly adjusting the rearview mirror, Source Dust is not only to narrow the blind spot of vision, but to make our vision more conducive to our driving.

After all, the angle of view and view of each rearview mirror is different. Therefore, when we adjust the rearview mirror, we need to adhere to a necessary principle, which is to "minimize blind spots". Therefore, the smaller the blind spot, the higher the safety factor of driving.

Of course, we can't ignore one thing and ignore another in order to improve the vision of the rearview mirror and affect our normal driving safety. Therefore, I hope that everyone can adjust the field of view of the rearview mirror according to local conditions to ensure safe driving.

Before adjusting the mirrors, we have to adjust the position of the vehicle's seat and steering wheel. The basic principles of seat adjustment are comfortable seating, clear visibility, and easy access to the steering wheel. Maintaining a correct sitting posture is a prerequisite for adjusting the rearview mirror, and the adjusted rearview mirror cannot play its due role when sitting incorrectly.

For the mirror, we need to adjust the horizon image in the mirror to the center of the mirror, and the image of your right ear to the left edge of the mirror.

For the left exterior mirror, we need to adjust the image of the horizon line in the rearview mirror to the center of the mirror, and adjust the image of the left body to occupy the area on the right side of the mirror.

For the right exterior mirror, we need to adjust the horizon image inside the mirror to 2 3 of the height of the mirror, and the right body image to occupy the left side of the mirror 1 4. Allowing the image from the ground to occupy more of the right rearview mirror makes it easier for the driver to grasp the road on the right side of the vehicle and the distance between the vehicle and the curb when pulling over.

Millions of car purchase subsidies.

A car has three rearview mirrors, and the owner looks at them more than 100 times a day, but how to adjust the rearview mirror, can you tell why? There are still certain rules on how to adjust the rearview mirror.

Tools Raw materials

Rearview mirrors. Step Method

1: Adjust** the mirror.

The left and right positions are adjusted to the left edge of the mirror surface just to cut to the right ear of the image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror **.

**Rearview mirror adjustment essentials: horizontal swing in the middle, ear on the left. The distant horizontal line is placed horizontally in the midline of the rearview mirror, and then moved left and right, placing the image of your right ear on the left edge of the mirror.

2: Adjust the left side mirror.

When dealing with the upper and lower positions, put the distant. The horizon line is set to **, and the left and right positions are adjusted to 1 4 of the mirror range occupied by the body.

Adjustment essentials for the left side mirror: Place the horizontal line in the center line of the mirror, and then adjust the edge of the body to occupy the mirror image 1 4.

3: Adjust the right side mirror.

Because the driver's seat is located on the left side, so the driver's grasp of the situation on the right side of the car is not so easy, coupled with the need to sometimes park on the side of the road, the right side of the rearview mirror should be left larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror surface. As for the left and right positions, it is also adjusted to the body occupies 1 4 mirror area.

Adjustment essentials for the right side mirror: Place the horizontal line in the 2 3 position of the mirror, and then adjust the edge of the body to 1 4 to occupy the mirror image.

4: How to eliminate blind spots as much as possible.

Many people think that in order to eliminate blind spots, they try to adjust the left and right rearview mirrors outward or downward. In addition, some studies have shown that perhaps in order to maintain a neat appearance at any time, or because of the love of beauty, there are also many drivers who adjust the ** rearview mirror to shine themselves in, and these are all wrong practices. According to relevant professionals, in order to obtain the maximum effective rear viewing angle, it is the most correct to adjust according to Figure 4.

A normal driver can see about 200 degrees left and right in front of him without looking back, in other words, about 160 degrees is invisible. It is too "difficult to rely on three small mirrors to cover the remaining 160 degrees"; In fact, the left and right rearview mirrors plus ** rearview mirrors can only provide an additional vision range of about 60 degrees, so what should we do with the remaining 100 degrees?

It's simple, look back more!

Precautions

As a reminder, although many new cars are now equipped with dual-curvature mirrors, this is only a slight expansion of the viewing angle of the left and right mirrors, and it does not fully cover all areas. In addition, it is not difficult for auto department stores on the market to buy wide-angle lenses to change clothes, which may further eliminate some dead ends, but the wider the range of viewing angles, the greater the degree of deformation of the rearview mirror image, and the more difficult it is to grasp the distance between the objects in the mirror, which is the "***" that must be faced at the same time when using wide-angle lenses.