How to adjust the height of the left and right mirrors of the car?

First of all, sit in a driving position that is usually more accustomed to driving, operate the rearview mirror control key to make the left rearview mirror translate up and down, until the heaven and earth in the rearview mirror each occupy about 1 2, and then control the left and right translation of the rearview mirror, so that the rear of the body occupies about 1 4 of the rear-view mirror (try not to exceed 1 4), and the adjustment of the right rear-view mirror can refer to the method on the left. In this way, it is possible to observe the trajectory of the vehicle in the distance behind and the rear of the vehicle when reversing.

First of all, we must adjust the position of the seat and steering wheel before getting into the car, and the correct posture is to lean the upper body slightly back, and the back to advance the head. All of them are effective in touching the seat as well as the headrest. The left side of the rearview, the left side of the car side mirror adjusts the sky and the ground half of the body.

and the curb is adjusted in a 1:4 ratio. The rearview mirror on the right is suitable for the rearview mirror adjustment on the left, which is almost the same as the sky-to-earth ratio of 1:

4. The ratio of the body and the roadside is 1:4 to adjust.

There are windows and doors or where the windows are adjusted to adjust the left and right mirrors.

Get in the driver's seat of the car, adjust your body position, and find a position that you feel most comfortable and easy to drive, and this sitting position must be able to easily step on the accelerator and brake.

The first adjustment is the left rearview mirror, the upper and lower positions of the left rearview mirror are adjusted to see half of the sky and the earth from the rearview mirror, and the left and right positions are adjusted to the body accounts for about a quarter of the left rearview mirror.

The left and right positions of the right rearview mirror are also occupied by the body in a quarter, the difference is that the right rearview mirror occupies two-thirds, and the sky only occupies one-third.

Because the driving position is on the left side of the car, the line of sight is somewhat biased, and only the rearview mirror adjusted to this state can see the car on the right.

When adjusting the left rearview mirror, it is important to allow yourself to see both the body and the obstacles in the left rear clearly. The best angle is to adjust the up and down of the left rearview mirror to the position that the sky and the ground occupy the upper and lower half of the mirror; The left and right sides of the left rearview mirror should be adjusted to the body occupies about 1 4 rearview mirror area, and the rear door handle can be seen.

And when adjusting the right rearview mirror, make sure that the up and down of the right rearview mirror should be adjusted to the position that the sky occupies about 1 4 of the upper part of the mirror surface; The left and right sides of the right rearview mirror should be adjusted to the area of the body accounting for about 1 4 of the rearview mirror area, and the back handle can be seen.

How to adjust the car rearview mirror is the most reasonable, and Kanyang will always give you the answer.

1. Adjust the ** inner rearview mirror.

Adjust the horizon image in the rearview mirror to the mirror, and adjust the image of the right ear to the left edge of the mirror.

2. Adjust the left rearview mirror.

The left rearview mirror is based on the horizon, and the horizontal line of the rearview mirror is adjusted first, with the sky and the earth each occupying 1 2, that is, the position of the middle line; Then adjust the left and right sight of the rearview mirror, and adjust the body to occupy about 1 4 of the mirror. It is also possible to reduce the area occupied by the sky and the car body slightly to improve the visibility of the road.

3. Adjustment of the right rearview mirror.

In the adjustment of the right rearview mirror, it is necessary to reduce the area occupied by the sky due to the driver's viewing angle. Adjust the horizon image in the right side mirror to the mirror height 2 3, and adjust the image of the right side of the car to occupy the left side of the mirror 1 4 area. However, when parking in the side position, we need to make a temporary angle adjustment according to the actual needs.

In the left rearview mirror, the driver should take the horizon as the benchmark, and adjust the up and down angles to make the rearview mirror appear half of the sky and the earth; The rearview mirror on the right side is the farthest away from the driver's position, so try to leave the rearview mirror space to the side of the body, so the right side of the car rearview mirror sky only occupies 1 4, and the body also occupies 1 4.

So there's a trick here, half the world, so that you can clearly see the cars behind you. Be sure to check the position of the driver's seat before driving! Note that even if it is a private car, it is necessary to check to see if the distance between the hands of the steering wheel is appropriate, and whether the foot can step on the accelerator and brake (manual transmission and clutch), which is a necessary preparation before driving, and must be paid attention to!

X is directly behind the vehicle, can only drive forward a little, wait for the rear vehicle to overtake me, and then through the middle of the car mirror to observe the rear car condition pull over, this time is indeed a very profound lesson, remind everyone, the vehicle must check the rearview mirror before starting the other is the convex mirror, this is very easy to understand, the plane mirror is flat, to say a more connotative words, that is, the surface curvature radius r infinity. The convex mirror is spherical and has a radius of curvature of different sizes, just like the wide-angle lens of a camera.

The method of adjusting the right rearview mirror is different from the left side, because the domestic car driver's seat is located on the left side, the owner of the right side of the car ear has increased the difficulty, but sometimes the need to park on the side of the road. It's as unreliable as following the steps taught by the instructor after graduating from driving school, it's completely a personal habit, and you can look comfortable by yourself, because everyone's seat height and backrest angle are different. Don't dwell on this kind of thing.

After that, the mirror adjustment is too high, and the rear vehicle situation and the rear ground situation can not be seen. The correct way is to adjust the upper and lower first, half of the ground and half of the sky, and then adjust the left and right, so that you can see your own body 1 4 on the line, that is, you can see the rear of your car. Many people make the same mistake of the last thing they need to see in the rearview mirror is the body!!

So, just tune out to see a little bit of the body, which minimizes blind spots.

It is best to adjust the car rearview mirror to such that you can see the ground from the inside of the mirror, and it is just parallel to the ground. There is not much difference between the left, the middle and the right, as long as it conforms to the driver's usual angle.

In the process of tuning, we should grasp the most basic angle, and then there is no special difference between the left and right, the most important thing is that it is okay to connect well, and there is no special Dharma.

The car rearview mirror generally has buttons in the cockpit that can be adjusted, and the rearview mirror is generally adjusted to the best viewing angle suitable for the individual, and there is no difference between left, middle and right.

Summary. Adjusting the mirrors to the right angle can greatly reduce blind spots on both sides of the body and improve safety when cornering and merging.

Start by adjusting the position of the seats, and then prepare to adjust the position of the mirrors. The left rearview mirror should be adjusted to the sky and the ground, with each occupying half of the mirror. Adjust the left rearview mirror, so that the body occupies about 1 4 of the rearview mirror area, adjust the right slide and roll the rearview mirror, so that the sky occupies 1 4 of the mirror;The right mirror should be adjusted to 1 4 of the mirror, so that the rear handle can be seen.

Adjusting the mirrors to the right angle can greatly reduce blind spots on both sides of the body and improve safety when cornering and merging.

1. Adjust the ** rearview mirror. The left and right positions are adjusted to the left edge of the mirror surface just to cut to the right ear of the image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror **.

2. **Rearview mirror adjustment essentials: horizontal swing in the middle, ear on the left. The distant horizontal line is placed horizontally in the midline of the rearview mirror, and then moved left and right, placing the image of your right ear on the left edge of the mirror.

3. Adjust the left rearview mirror. When dealing with the upper and lower positions, the distant horizon line is set to **, and the left and right positions are adjusted to 1 4 of the mirror range occupied by the body. Left side mirror adjustment essentials:

Place the horizontal line in the center line of the mirror, and then adjust the edge of the body to occupy 1 4 in the mirror image.

4. Adjust the right rearview mirror. Because the driver's seat is located on the left side, so the driver's grasp of the situation on the right side of the car is not so easy, coupled with the need to sometimes park on the side of the road, the right side of the rearview mirror should be left larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror surface. As for the left and right positions, it is also adjusted to the body to occupy 1 4 mirrors to call the balance surface area of the closed chain Qi.

5. The right rearview mirror adjustment essentials: put the horizontal line in the 2 sedan 3 position of the rearview mirror, and then adjust the edge of the body to occupy the 1 4 of the mirror image.

The left and right rearview mirrors of the car are adjusted:

1. Adjust the left rearview mirror. In general, the rearview mirror on the left side should be adjusted based on the horizon. Adjust the horizontal line of sight of the rearview mirror, and "heaven and earth" each account for 1 2, that is, the midline position is disturbed; Adjust the left and right sight of the rearview mirror, and adjust the range of the body occupying the mirror to about 1 4.

In fact, the proportion of the "sky" and "body" parts can be slightly reduced, mainly to increase the viewing angle of the road situation. However, this is also subject to individual circumstances;

2. Adjust the right side rearview mirror, the adjustment of the right side rearview mirror needs to pay more attention, due to the driver's viewing angle, it is necessary to reduce the visual space occupied by the sky. Usually the horizon is used as a baseline, with the sky occupying 1 4 and the ground occupying 3 4. And the space required for the body is the same as on the left side, which occupies 1 4.

However, when reversing and parking in the side position, due to the limited viewing angle on the right side, it may be necessary to readjust the rearview mirror to avoid danger;

3. Adjust the rearview mirror in the car, and the adjustment of the rearview mirror in the car is relatively simple. The main thing is to ensure that you can see the situation behind the car completely from the rearview mirror. As for the distribution of upper and lower space, generally speaking, based on the horizon, each occupies about 1 2.

The adjustment method of the left rearview mirror of the car: 1. After the left and right rearview mirrors are adjusted correctly, you can see the two door handles of the front and rear doors and the contour part of the rear wheel (orange part), and feel that the left rearview mirror adjustment is slightly higher, and the right rearview mirror adjustment is slightly lower; 2. In the process of reversing into the warehouse, the direction of which side to play, the tail of the car will swing to which side, and the front of the car will swing in the opposite direction, so you can see the swing direction of the left rear wheel through the left rear sight mirror to judge whether the direction is straight. It can also be judged by observing the distance between the body and the library edge line in the left rearview mirror and the right rearview mirror by the bridge key.

But due to the reason of the difference in mirror distance, under the condition that the distance between the two sides is the same, the left rearview mirror finger bit) is wider than the right rearview mirror (2 finger bits), and the body line is not parallel to the yellow line in the right rearview mirror, and the left rearview mirror is parallel; 3. It should be noted that if the distance between any side of the left and right body is too narrow in the reversing storage, after returning to the steering wheel, if the body is positive, there is no point in adjusting again, and the body is easy to get out of the line. Only Timinzhou Qiaoqian judged the trend of the rear movement and adjusted the steering wheel in advance.