Can one ASDL have two cats at the same time?

lz good,It's not okay to do this,An adsl can only be logged in by one computer in the same time period,It is not possible to connect two cats to log in separately,The feasible way is to use a router to separate,Then two machines can go online,But the landlord said that the distance is far,This estimate is no way!

Khan, the cat also has to be connected by the line, and a port, how to connect 2 cats?

A line can only be connected to one ADSL

**The line is connected to the cat, the line is a small plug, the cat's network is connected to the WAN port of the router, this line is a network cable, the crystal plug is larger, the computer is connected to the LAN port of the router with a network cable, set the router, see the router settings for details**.

The network cable of the modem is connected to the WAN port of the router, and the network cable of your computer is connected to any port except the WAN port, and then set it up according to the manuals of the router!!

The network cable exit of the cat is connected to the WAN port of the router, and the two computers are connected to the LAN port of the router, and then open one of the computers, open the IE browser, enter it in the address bar if it doesn't work, enter it and press enter, a dialog box will pop up asking for the user name and password, the user name is admin, the password is admin, if it is wrong, the password will be empty, and the direct point will be confirmed, and then enter the point setting wizard - select the Internet access method (choose a PPPOE)—— Then enter the broadband account password and save it.

Changing the MAC value of both machines to the same is fine and you can get started. Run. cmd into ipconfig all to check the mac of the computer you are surfing the Internet, and then change the MAC value of the other computer to the same, you can modify it with the next mac modifier on the Internet, or follow the steps below to change:

My computer Right Health Properties Hardware Device Manager Find the network is matched Double click the network card Point advanced Follow the ** in the network can be Some network cards are in Chinese is the network address.

1.The network cable on the cat is connected to the first interface of the router, 2Go to the Internet to check the default IP and account password of the router, 3Enter ** (router IP), log in to the router settings page, and set a broadband username and password.

Once you've set it up, you're ready to share the internet.

Insert the line out of the cat into the WLAN port of Ruijie router, and insert the line out of Ruijie router LAN directly into the computer network card, and set the IP of the computer to be in the same IP segment as the IP of Ruijie router, log in to Ruijie router, enter the ADSL account password, and set it to automatic login, and then set the IP and DNS devices of the two computers to be automatically hunted.

Cat-route-computer.

Just set the account to the route.

The external line is connected to the WAN port of the router, and the two computers are connected to the LAN port of the router.

Connect the interface identified as WAN on the route to the modem, and connect the computer to the other 4 ports of the router, you read the manual of the route, you should enter this address in the IE browser, you can enter the configuration interface of the router, and set the username and password of your broadband dial-up in the router.

When configuring a route, you need to set your own IP address to any address in this range to log in to the route configuration page.

Router settings**, how to set up the router, how to configure the local area network.

If you don't know the expertise, it's better to ask someone who understands to get it, and if you get it wrong, it will take you longer to fix the problem.

Router installation and setup.

Follow these steps to set it up:

1. Connect the ** line with the cat, and then connect the network cable out of the cat with the WAN port of the router, connect the other ports of the route with one of the computers, and connect the power supply of the router and the cat, and set it according to the manual of the router; Remember to set your broadband account and password, and restart the route;

2. Check whether this computer can be connected to the Internet, and you should pay attention to your dialing rules when setting up routing, whether it is connected on demand or always connected. Pay attention to whether the route has been dialed out, if it shows that it has been connected to prove that the broadband account is set correctly, here you should be able to access the Internet, if not, you may need to manually set up DNS, generally after setting up the route, if you can access the Internet, and then set the host's IP here to automatically get it;

3. Connect to another computer, the IP of the computer is also automatically obtained, and the DNS is the same;

It should be fine by following the above steps, I didn't think about it, it's almost there!

Connect the cat first, then the router, and then use the cracked account and password in the routing dial.

Add a DNS address.

The gateway and IP will be set by yourself, right?

The cat should be connected to the ** wire and connected to the router and plugged in the power supply.

The router connects the cat to the 2 network cables of your computer.

Connect the network cable out of the cat to the router, and then connect the other two network cables from the router to your two computers respectively, and configure the router according to the manual that comes with the router, in fact, it is to enter your adsl account name and password into the router, and use the router to dial you.

Everything is good or bad, but only the quality of the problem itself does not affect the speed of the Internet. The speed of your internet depends on your bandwidth.

Huawei's good, if it's for home use, there should be no problem, Guangdong Huawei sells for 100 yuan!

All contacts are repaired, and if it doesn't work, replace them with new ones.

Cats can also add a radiator. Just tie a fan to the bottom.

In addition, you can withdraw from the network and apply for another one.

There are a lot of cats taobao for sale.

It should have been overheated. Generally, broadband operators around the country are responsible for replacing them for free, so ask for a new one. Then pay attention to ventilation.

There are places to sell cats, and there are many in the electronic city: such as wireless cats.

Since the landlord has repaired the transformer, why not repair the cat? Anyway, it's not easy to use (or can't be used), are you afraid of disassembling it and breaking it?

It's best to try a different cat first, which may be related to the long use of the transformer and overheating.

The easiest way is to dial 10010, press 2 and then 0, and if it doesn't work, just complain.

You can reboot it a little bit, there is a small hole where the cat is plugged in. Find a toothpick and poke it. Try it.

It's too hot. The heat dissipation is not good, it is recommended to use a fan to blow it for a period of time.

Yes, you have to use a cat, or that the cat has a routing function.

LAN is a network cable into the home;

ASDL is the first line to enter the household.

At present, most of the telecom uses ADSL, and the network needs to be modeled.

LAN is a single line to the home, and it is not a virtual dial-up.

ADSL is a virtual dial-up.

Of course, you'd better buy a broadband router, about 100-200 yuan, connect the broadband modem network cable to the WAN port of the router, set your account in the router, and turn on the DHCP service, connect the two machines to the LAN port of the router, set to automatically obtain the IP address, it's OK, the maintenance is simple, and the cost is not high.

Wouldn't it be enough to use a route?

Buy a router, that's a must, at the beginning, you have to set up a route, you must now, the browser enters, or the account you enter is admin, and the password is admin, and the password is admin, and then click on the setup wizard to follow the steps Let you enter the password of the account password, enter the card number and password of the adsl, but you can complete it with @201 on the back of the account.

There are two sets of plans:

1. If the ADSL modem supports the routing function, you only need to add a hub.

2. If the ADSL modem does not support the routing function, then you need to use a router.

Only one account can be logged in.

In order to use both, it is necessary to establish a local area network.

Buy a router, follow the instructions in the specified ** (mine is) enter your username and password, and connect. If your account has been logged in with one of the computers, you should also clone the physical address of the computer network card in the router, and run ipconfig all in the command prompt to view the physical address of the network card. Then enter the above physical address in the network parameter MAC address cloning and save it.

Finally, click Connect in the running state, and you can surf the Internet. I've been using this for a long time without any issues.

The recent ADSL is not the same, there are restrictions.

The cat is connected to the router, the router is connected to the computer, and the password is entered in the routing settings, and the two can be used.

Cat router (according to the manual to set the Internet account password, some to set others such as IP, DNS, etc.) respectively into the two computers (it is best to set the IP, do not get it automatically, the boot speed is faster, the two gateways and the routing settings IP are the same, the Internet IP is different from the last digit of the gateway, change it slightly).

Pay attention to the network cable wiring method.

1. The network cable from the network cable port of the cat is connected to the WAN port of the router, and the line is sent out from the LAN port to the computer.

2. Set the computer IP according to the router instructions

3. Enter the routing setting interface according to the router instructions, and set the WAN port and LAN port.

4. Set the wireless parameters (if it is a wireless route).

5. After everything is set and saved, you can go online at the same time.

ADSL line (that is, ** line) -- cat --- router --- multiple computers.

The computers are connected to the router.

Connect the ADSL cat to the online first, then connect the router to the cat, and then connect the 2 computers to the router.