A cat, a router, how to connect two computers, China Telecom Answer correctly and rescore

**On the cable to the cat, the cat is connected to the WAN interface of the router, and the network cable of the computer is connected to the LAN interface of the router, and then enter the routing setting interface, enter the password of the telecom, let the route dial, and then both computers should be able to access the Internet.

**Hole-**Cable-Separator-One end is connected**, one end is connected to the cat - the cat is connected to the network cable to the router - the router separates 2 network cables to the computer.

That's it, what else.

Set a password for logging in to the router. That's it.

The router has branches, at least four computers can be connected, you can follow the router's instructions to connect the router and the computer!

The specific steps are as follows, with a total of three steps:

1. Log in to Router 2 in the same way as setting up Router 1, select the Internet Settings option, and change the IP address to.

2. Select the LAN port setting option in Advanced Settings and change the LAN port IP address to:

3. Finally, the two routers are connected to the telecom fiber modem.

Connect one of the routers to the WAN port and connect the two routers to the LAN port. The second router turns off DHCP.

If you have a multi-port routing modem, you can use the modem to connect two routers.

If you only have a single cat, or a multi-port cat can also be used, use the Cat-1 router. Router No. 1 is connected to Router No. 2.

This is how it is connected.

1. Use the No. 1 router to connect the cat, set up a broadband dial-up connection on the No. 1 router, and set up the wireless well

2. If your No. 2 router supports wireless reception, you can directly connect the wireless of Router No. 1 to the router.

If not, you need a network cable, one end to the LAN port of Router 1, and the other end to the WAN port of Router 2.

In the settings of the router, the broadband acquisition method is dynamic IP, and the LAN IP is set to X is a different number from the 1 router (0-255).

This way both routers can be used.

Only one route can be used as a secondary route.

First, the first wireless router, set up and install it like this:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Second, there are two ways to set up the second router:

The first method: dynamic IP mode (the first route is the primary route, and the second route is the slave route).

1. Plug in the router and do not connect the LAN port of the main router first, and reset the slave router (restore the factory);

2. Connect the computer from any LAN port of the router to enter the settings page;

3. Set according to the dynamic IP;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the LAN port of the main router to the WAN port from the router.

The second method: wireless AP mode.

1. Connect the computer to the LAN port of the router first, and change the IP address of the slave router. For example, most router addresses are, we just need to change from router IP address to that;

2. Turn off the DHCP function from the router in the settings;

3. Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.

No need to do other settings, you go to buy a Pulian mini wireless router, without the routing function, directly convert the wired network into wifi, very convenient, this is how I use it!

Connect the network cable from the cat to the WAN port of the router, and connect the two computers to the LAN port of the router casually. Log in to the router with a computer, select PPPoE mode in the WAN port settings, and enter your broadband account and password into it. Set the network card to automatically obtain the IP address mode on both computers, and then the computer will automatically be able to access the Internet, without entering the account number and password on either computer.

First find a short network cable to connect the router to your computer, and then log in to the router, turn off the DHCP after entering, and then change the IP of the LAN port to, restart the router, okay, you can wireless wifi, don't understand and then look for me

The network cable given to you by the landlord can be plugged directly into the LAN port.

The details are as follows. 1.All you need is a wireless router set up. The steps are as follows.

Connect the network device correctly, connect the network cable (or direct home cable) of the cat to the WAN interface of the router, connect any interface of the LAN port of the router to the computer, open Internet Explorer on the computer, enter the correct IP address of the router (username and password, the default username and password are admin), you can also refer to the router manual, enter the configuration interface of the router, and set the router correctly according to the setup wizard. Then, restart all your devices.

2.The configured LAN port of the router is connected to the LAN port of another router.

3.This completes the setup. You can set the direction of the middle line by yourself, and you can reach the level where you are satisfied with the Zen guess.

Equipped with broadband, Internet room! Guangdong Telecom's online business hall is equipped with telecom broadband, faster, easier and more economical! 4M pure telecom broadband, no fixed line and mobile phone, one household and one line, no peak pressure on network speed, please click for details.