Two computers at home, one wireless router Can two computers access the Internet?

How many Ethernet ports are there on a wireless router? Generally, it is 4 or 8 mouths. If so, connect to two PCs.

If not, the computer needs to install a wireless network card.

Configure the router data, and you're good to go.

Dear users:

According to your description, first of all, if there is a wireless router, then turn on the power supply first, and then plug in the network cable, plug in the WAN port (usually the blue port), and then plug in the LAN port with the network cable connected to the computer, after doing these jobs, then you will see that there is an address and account password behind the router, and enter the address you see in the router in the browser after connecting, generally of course, if you are using ** online Internet access at home, then you have to prepare an additional modem, commonly known as "cat")

Then enter, enter the corresponding account and password, generally the new ones are admin

After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

Enter the setup wizard interface.

Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

The next step is to set it up successfully.

Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

**Tutorial address.

If you have any other questions, you can also log on to the online business hall of Telecom (

Inquire about it.

Yes, routers were originally developed to allow multiple devices to use the network together.

OK. You've got a wireless router. Then it should be wireless Internet access.

What you mean is that you can connect two computers to access the computer with your wireless connection, you don't need any connection, or you can connect the two computers to the Internet cable, hehe.

1.Wired Internet access: Use two network cables to connect the two PCs to LAN 1 and LAN 2 of the router respectively.

2.Wireless Internet access: You need to buy two wireless network cards, connect them with two PCs respectively, connect with one of the PCs with one network cable, enter the route, set the wireless parameters, and remove the network cable.

3.One wired Internet access, one wireless Internet access: buy a wireless network card and connect it with the A-PC; The LAN port of the network cable is connected to the B-PC.

Use the B machine to enter the inbound route, set the network parameters, turn on the wireless network function, and save the restart route. Can.

It is easiest to connect according to the operating instructions.

1. First of all, if your network cable is a direct connection route, then go in and set up the route with an IP like that. We put an account number, a password with the wizard.

2. If there are still cats, it is to pick up the cats first, and then use the network cable to connect to the route. Ibid.