What is the difference between offline parts, pure disassembly parts and refurbished parts?

Off-line parts, which are the accessories that many 4S shops and auto repair shops like to purchase, are generally original parts in very new condition, but there is no packaging, and it is difficult to distinguish from pure disassembly parts. However, there may be functional defects in some aspects of the offline parts with poor quality, especially the quality and service life are difficult to guarantee, and riders should pay attention to them.

Refurbished parts, remanufactured parts, refurbished parts are some old auto parts dismantled from the old car or the accident car dismantled from the car after refurbishment, repackaging and then circulation again roadside shops and social maintenance plants across the country, once again in a concealed way, low cost ** into the market. This type of accessories mainly includes rearview mirrors and fenders.

Accessories such as wheels, as well as functional accessories such as sensors and actuators, are also refurbished. This kind of accessories are very cheap, but the origin is very, very unreliable, and the quality cannot be effectively guaranteed, so it is best not to install such accessories.

As the name suggests, pure dismantling parts are accessories removed from the car, which mainly come from the modification market and the insurance accident car dismantling market. For example, if the owner buys a new car and immediately modifies and replaces the wheel tires, then the replaced 4 wheels will circulate to the auto parts market and become pure dismantling parts. Good quality will also be packaged as original parts to sell.

Genuine parts represent the parts produced by qualified manufacturers (not necessarily the channels of automobile OEMs), which are the parts produced by regular supporting factories, which have passed ISO9000 quality certification.

Generally, they are circulated from automobile manufacturers and directly authorized by manufacturers to sell to dealers around the country. However, some genuine parts do not have trademarks, and the difference between such genuine parts and original parts is that the parts factory has not entered the equipment procurement list of automobile OEMs for some reasons.

Accessories and packaging cannot be branded. For example, BMW's bumpers.

If it is produced by an accessories factory and does not have the BMW trademark on the packaging, it is genuine.

On the surface, it means that the parts that are not used by the automobile factory, but in fact, most of them are dismantled or refurbished parts.

Accessories and packaging cannot be branded. For example, BMW's bumper, if it is produced by a parts factory, but there is no BMW trademark on the packaging, it is a genuine part, and it is a rule not to play a trademark, but it does not seem to be counterfeit "justified".

It is a problem of the old and the new, and some of the old ones are directly colored and turned into new ones.

The problem of the old and the new, when it is renovated, it is basically a new thing.

The only difference between kitting and original parts is the packaging.

One old and the other new, that's just a matter between the two.

In layman's terms, it is brand new, second-hand and refurbished.

The biggest difference is that they are all second-hand.

Because it's three different parts.

That's up to you to ask the professionals.

OK. It is not difficult to understand that the original parts are literally manufactured from the original manufacturer, and the quality and appearance are the same as the original car, and there is a corresponding certificate of conformity. Genuine parts are qualified accessories produced by regular manufacturers, although they are accessories produced by qualified manufacturers, but they do not necessarily meet the specifications of the original parts, so they are still different from the original parts.

Pure dismantling parts are auto parts that are removed from the original car, because it is not clear whether they are disassembled from a new car, an old car, or an accident car, so the quality of the parts is still controversial. The off-line parts are the defective and unqualified parts in the original auto parts, and the parts have some defects, which are much lower than the original parts, so they are also auto parts that 4S stores like to buy.

Auto parts off the assembly line brand parts.

Brand parts are some small workshops without formal production qualifications to produce auto parts, for some decorative accessories to buy brand parts do not matter, but once the accessories involve the safety of driving, it must be considered more, or not to buy as well.

Most of the refurbished parts are parts removed from the accident car, so the degree of damage is very large, and the probability of failure is very high, so don't endanger our own safety in order to save money. The damage of a small car part can cause an irreparable traffic accident, so don't bury a timed sticky bomb around you for the sake of cheapness.

Most of these off-line accessories are due to unqualified production of the original factory or other reasons, and the main channels for the accessories that flow out of the original factory come from the procurement of 4S stores.

Accessories off the assembly line refers to the parts produced from the original factory, but because the formal pre-loading inspection is unqualified, or the parts that are damaged during the production process and in transportation, there are also some defective parts that are not met because the production standards are not met, and the accessories made by the manufacturer for testing or testing.

In China, there are some manufacturers will use the claims to return to the factory accessories and defective parts, will be damaged in key parts of the disposal, according to the garbage waste treatment, these waste products are pulled out of the factory by the acquirer, for classification and dismantling repair, but also become the next round of land line accessories. Among these end-of-line accessories, most of them are appearance parts.

In addition, accessories are also divided into original parts, genuine parts, refurbished parts, etc.

Original parts: Parts of the loose stove with the manufacturer's logo, individually packaged and coded. The channels are mainly in the main engine factory and 4S stores, such as buying Volkswagen's original headlight accessories, then there will be Volkswagen's trademark on both the headlight accessories and the packaging.

Genuine parts: It is a qualified manufacturer of accessories, this kind of accessories are not necessarily produced by the original automobile factory, but as long as there is a manufacturer name, product brand and production address, but also have a certificate of competence, it can be regarded as genuine parts.

Refurbished parts: mainly for parts on accident cars or scrapped cars. The channel process of refurbished parts is that the general accident car is dismantled through the insurance company, the auction company, the accident car buyer, and then enters the parts market, and these accessories, there is no problem to become the dismantling of the car parts, and some of the older or problematic parts will be resold to small workshops and manufacturers without safety guarantee for refurbishment.

Most of the refurbished parts have major safety hazards and failure rates, so try not to buy them.

Although the off-line accessories are also produced by the main machine, compared with the accessories produced by the original factory, the most obvious thing is that there is no independent packaging, and the original accessories will have independent packaging and parts code.

1.Preface.

Car owners know that regular maintenance and maintenance of the vehicle is very important. In order to ensure the normal use of the car and extend its service life, car manufacturers usually recommend the use of original off-line parts. However, for some car owners, this may seem like an expensive option for the state.

In this article, we will take a look at whether the original off-line accessories are worth buying.

2.Definition of OEM end-of-line accessories.

Original off-line parts are parts produced by car manufacturers and **. These accessories are perfectly adapted to the specifications and standards of the car manufacturer and are guaranteed to be a perfect match to the vehicle. In contrast, there may be some differences in accessories from other brands, which may affect the performance and safety of the vehicle.

3.Advantages of original off-line accessories.

Using the original off-line accessories has the following advantages:

More reliable quality - Genuine end-of-line parts are usually of higher quality because they are produced by the car manufacturer and are able to better guarantee the performance and safety of the vehicle.

Longer warranty period - Genuine off-line accessories usually have a longer warranty period, which means that during the warranty period, if there are some quality issues, you can get better repair service.

Better Performance - Genuine end-of-line parts are specifically designed and manufactured to accurately match your vehicle, resulting in better performance and driving experience.

4.Disadvantages of original off-line parts.

There are also some disadvantages to using original off-line accessories:

Expensive - Manufacturers often have higher prices for off-line accessories compared to other brands.

Scarcity – Since they are produced by automakers, original end-of-line parts can be relatively scarce and require longer wait times or longer avenues of sourcing.

High Maintenance and Maintenance Costs - Some repairs can be more expensive due to the high number of original end-of-line parts**.

5.Is it worth it to buy original off-line accessories.

Depending on the actual situation, whether it is worth buying original off-line accessories depends on your budget and personal needs. If you have higher requirements for the performance and safety of your car, or prefer to keep your vehicle's original configuration, it is worth buying original off-line parts. On the other hand, if you care more about ** and convenience, then accessories from other brands will also be a more rational choice.

6.Conclusion.

Overall, the performance and quality of the original off-line parts are indeed better, but they are expensive. When choosing, you need to consider your needs and balance the trade-offs between performance and performance. No matter what accessories you choose, make sure to find a trusted service technician who will professionally install and maintain your vehicle to ensure that your vehicle is running smoothly and safely.

Genuine parts are qualified accessories produced by regular manufacturers, although they are accessories produced by qualified manufacturers, but they do not necessarily meet the specifications of the original parts, so they are still different from the original parts, and the owner of the pursuit of perfection should consider it before buying.

Their appearance and performance are not the same.

The general quality of the original parts is relatively high.

Generally speaking, the original parts are made from the original manufacturer.

Because of different configurations, the manufacturers on it will be different, and they are all made specifically.

Literally, it's understandable, it's nothing more than the difference between the original factory.

These are all made in different manufacturers.

The off-line is also produced by the main engine, but there is no independent packaging. The original factory has independent small packaging and part coding.

First, there are several categories of accessories in the industry:

1.Original: the parts produced by the main machine, with independent small packaging and parts code.

2.Offline: It refers to the same Xihe, which is produced by the host, and there is no independent packaging without a code.

3.Professional factory: It is divided into imported professional factory and domestic professional factory.

4.Analogue: parts produced by other domestic manufacturers.

2. Auto parts.

Auto spare parts are the various units that make up the whole car and a product that serves the car.

With the increasingly fierce competition in the auto parts processing market, the concept of environmental protection is deeply rooted in the hearts of the people, as well as the continuous upgrading and application of technology, the international auto parts processing parts industry has shown the following development characteristics in recent years

The trend of auto parts processing system matching and modularization is in the ascendant.

Globalization of auto parts processing and procurement.

The transfer of the auto parts processing industry has accelerated.

There are many types of auto parts, and now there are more and more brands of cars, and there are more and more types of cars. Automobiles can be divided into passenger cars and commercial vehicles, of which passenger cars refer to vehicles with less than nine seats (including driver's seats) and the main purpose of carrying passengers. Specifically, passenger cars are divided into basic passenger cars, namely sedans, MPV models, SUV models, and other models such as pickup trucks.

Commercial vehicles refer to vehicles with more than nine seats (including the driver's seat) or vehicles whose main purpose is to carry goods. Specifically, it is divided into: passenger cars, trucks, semi-trailers, passenger cars and non-complete cars.

With the improvement of people's living standards, people's consumption of automobiles is also increasing, and the market of auto parts has become larger and larger. In recent years, auto parts manufacturers have also developed rapidly.