What s the matter with the Sony T300 s camera shaking as soon as it s turned on?

Updated on number 2024-04-13
8 answers
  1. Anonymous users2024-02-07

    Not only the image is shaking, but the fuselage is also trembling, and the lens anti-shake is broken, it's as simple as that, if you can fix it, go to the place where the camera is repaired.

  2. Anonymous users2024-02-06

    1.Do not hot-swap.

    When the device is turned on, the digital product may be processing or saving data, and if the card is inserted or withdrawn, it is easy to cause damage or data loss to the digital product.

    2.Insert the card in place.

    When inserting the card, the force should be even, and the card should pay attention to the orientation, for a certain type of memory card, only the specified direction can be loaded into the digital camera. If you want to load a CF card, you must wait until the card release button on the camera is ejected. Make sure the switch is turned off after insertion.

    3.Be careful when taking it out.

    When the digital product is not used for a long time, the memory card should be removed. For the kind of memory card that can only be removed by pressing the release button, be especially careful when removing the card, as the card can easily eject and avoid falling on the ground.

  3. Anonymous users2024-02-05

    It is recommended that you contact the Providence Digital Camera Repair Center.

    My Sony T200 is startup jitter, and I started to get Sony customer service, **more than seven hundred. Later, I found the Providence Digital Camera Repair Center on the Internet, and the evaluation on the Internet was very good, and the reputation was good, so I sent the camera over with the psychology of trying it out, and I received my beloved camera on the fourth day, which was as good as ever, and never shook again. Now I use it as new.

    It cost less than two hundred.

  4. Anonymous users2024-02-04

    Hurry up to Sony customer service, the T series has this problem, free maintenance, until July 15, 12.

  5. Anonymous users2024-02-03

    This is the legendary Sony T-series card player jitter door, which started with occasional slight shaking, and as time went on, the jitter became more and more severe, and finally it was impossible to take pictures.

    This is the most common problem with Sony card machines, which is caused by the lack of lubricating oil in the lens assembly. Is your T300 out of warranty? If not, they will fill you with lubricating oil for free, and by the way, they will also upgrade the firmware for you, and this fault will be gone.

    If you are from Beijing, please go to the Sony after-sales service department at the east exit of Weigong Village to repair, the lubricating oil of other maintenance departments is not professional, and there is a phenomenon of indiscriminate charges, and there is no testing equipment for those street shops, so don't stab you in other places and it will be troublesome. My Sony card machine also had this failure, but fortunately it was not out of warranty. As soon as you say they know about the problem, it can be fixed in about an hour.

  6. Anonymous users2024-02-02

    Hello,T300 The screen is always shaking because the anti-shake function of the machine is broken,Resulting in the screen not stopping or occasionally shaking,This requires you to go to the nearest maintenance point to repair,Generally, the personal maintenance point is about 100 yuan。

  7. Anonymous users2024-02-01

    Sony T series card machine shake door, go to customer service to solve it, free of charge.

  8. Anonymous users2024-01-31

    Is it your hand to fight again, put it on the flat ground to try. Or it's the display that you get to the repair point to check, or the key is stuck and pulled. Look at how much money you bought.

Related questions
3 answers2024-04-13

Hello, this is mainly caused by: "memory error" or "software incompatibility"! >>>More

14 answers2024-04-13

iPhone 6 Activation Preparation:

Since it takes a while to activate, make sure your iPhone 6 has less than 15% battery before activation. >>>More

32 answers2024-04-13

This can only be known by inspecting the machine on a case-by-case basis.

12 answers2024-04-13

Reseat the memory.

Troubleshooting. >>>More

7 answers2024-04-13

First of all, check each socket, it is best to pull it off and plug it in again, and listen to how many times it is announced. For your reference! >>>More