Is it better to use tile adhesive or marble glue for wall tiles

Of course, the tile adhesive is good, and the marble glue used for the bonding between the stone is not suitable for the bonding of tiles and walls.

Of course, it's good to use tile adhesive, Tangshan Fuke Building Materials is a company specializing in production.

The upstairs is correct, but isn't it more economical to use cement?

The kitchen and the cabinets are inseparable. If you choose to make a tile cabinet. When setting up a tile cabinet, the height of the cabinet needs to be determined by laying cement bricks.

It should reach 80 centimeters and the width is about 60 centimeters. Then lay 2 3 layers of cement bricks. The bricks can be connected with cement mortar, and the back of the tiles can be connected with weather-resistant adhesive.

Determining the number of bricks to be laid and cut according to the size requires the use of a cutting machine. We will cover the cut tiles with cement in water.

The curing time of the structural adhesive is longer, at least 12 hours, and patience is required. If you want to set up faster, you can also choose dolomite glue. The kitchen countertops are made of a wide range of materials.

The owners will choose the type of stone, the marble is very beautiful. If you choose natural marble, it should be slightly more expensive. You can choose artificial stone, which has good wear resistance and can form a whole.

Because there are pores on the surface, water stains can easily penetrate. Daily cleaning must be done. As a two-component binder, the main property of marble is fast gelling.

Strong weather resistance, short curing time, low temperature curing.

If it is at room temperature, the curing time will be shorter, and it will be completely cured after about 5 seconds. Dolomite gum is relatively intolerant to water, not durable, and shrinks during the curing process. The properties of structural adhesives are different.

It has good load-bearing capacity, anti-aging, anti-fatigue, corrosion resistance, impact resistance, anti-spalling and other properties. It has a long service life and particularly stable performance.

In China, the application range of marble glue is not particularly wide. It is generally used for stone repair and small area tile pasting. Although marble glue is mainly composed of unsaturated resins, peroxides, and other non-toxic raw materials, it is, after all, glue, not volatile, and contains toxic aromatic compounds.

The same goes for structural adhesives. Because it is a colloid, it has strong curing properties and formaldehyde.

Structural adhesive should be used, because the adhesive paste effect is particularly good, it can be pasted very firmly, and there will be no residue on the surface, which can reflect the aesthetics.

Marble gum should be chosen; Because this glue is relatively firm, and the effect is also very good, it can increase ornamentality, its bearing capacity and antioxidant power are very good, and the service life is relatively long.

Marble glue should be chosen, because the quality of such glue is very good, and then it can also play a very good stickiness, not easy to produce a pungent odor.

[Calculate how much it will cost you to renovate your home].

When it comes to marble glue, I believe everyone is familiar with it, it is a common material in decoration. However, some friends will use marble glue in paving tiles, so can marble glue stick tiles? What are the precautions when using marble glue? With these two questions in mind, let's take a look!

Can marble glue stick tiles:

Yes, marble gum is not only resistant and cures quickly, but also has high hardness and will not turn yellow. Therefore, it is often used for the repair of stone cracks. However, marble glue has poor water resistance, and the material is not very environmentally friendly, and it will age and become brittle after about 3 years of use. It is not recommended to use it in large areas.

What are the precautions when using marble glue?

1.First of all, before the use of marble glue, it should be deployed in a certain proportion, and the ratio of the curing agent is generally about 100:2, but the amount of curing agent should be mastered, not too much and not too little.

Too much marble gel solidifies too quickly, too little and no viscosity, which will make the solidified product loose and yellow, and become a waste product.

2.Secondly, before using marble gum, it is best to try it in a small area, and then fill the amount according to the need. After the trial is qualified, a large number of construction can be carried out to achieve the best effect.

In addition, the lid should be closed tightly after opening, and the remaining prepared marble glue can not be put back into the tank to avoid affecting the overall quality.

3.Then, when using marble glue in winter, it is best to soak the glue and curing agent in hot water at 30-40 degrees for half an hour, and then mix and mix. If the curing is slow, some curing agent can be added appropriately.

4.Finally, marble glue cannot be applied in wet sites or environments where the temperature is below -10 degrees or above 40 degrees, because the humidity is too high, and the surface of the colloidal will stick to your hands. Too high or too low a temperature can affect its adhesion.

In addition, the marble glue cannot be moved immediately after bonding, and it can only be moved after solidification, otherwise the bond will not be firm.

Summary: The above is the introduction of marble glue can stick tiles and what are the precautions when using marble glue, I hope to help friends in need, if you need to know more about relevant knowledge in the later stage, welcome to pay attention to Qeeka Home information.

Enter the area and get the decoration for free**].

1. Yes. The raw materials of marble glue include epoxy resin and unsaturated resin, which has strong weather resistance, can be cured quickly, and marble glue has been used for a long time, and it is not easy to turn yellow. Marble glue is often used for the bonding of a variety of stones, and for repairing gaps on the surface of materials.

2. The base material of marble glue is unsaturated resin, and it is a paste-like viscous adhesive prepared with epoxy resin and other polymer synthetic materials as the base material. Tile adhesive is a polymer modified cement-based tile adhesive, which is divided into No. 1 (ordinary type (reinforced) and No. 3 (larger size tile or marble) and other varieties.

Are tiles good with adhesive? It can reduce the dependence of the traditional ceramic tile construction technology on the process of sprinkling and soaking bricks on the base, and better avoid the problem of poor bonding caused by soaking bricks and insufficient sprinkling.

Tile adhesive is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

Tile adhesive (adhesive) solves the problem that some tiles cannot be pasted with ordinary tile adhesives, which is convenient and convenient, so you don't have to worry about shoveling off the tile and re-pasting it or sticking it outside with adhesive. No need to dip bricks in the construction, good flexibility, impermeability, crack resistance, aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmental protection, easy construction.

The use of new tile adhesives can save labor, shorten construction time, and save a lot of labor costs. At the same time, the new type of tile adhesive is firmly adhered to, without worrying about follow-up maintenance problems, and can also be about traditional ceramic tile adhesive materials such as yellow sand and cement. Tile adhesive, also known as tile adhesive or adhesive, adhesive and other names, is a new type of material for modern house decoration, replacing the traditional cement yellow sand, the adhesive force is several times that of cement mortar, can effectively paste large ceramic tiles and stones, to avoid the risk of falling bricks.

Good flexibility to prevent hollowing in the production of drums. It is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

Tile adhesive has many advantages, such as the use of tile adhesive can save more space than the use of cement, and only a thin layer of tile adhesive is OK. If the construction process is up to standard, the tile is very firm; It can also reduce waste, no toxic additives, and meet environmental requirements.

Use of tile adhesive].

Scope of use: This product can not only be used for cement mortar substrate, but also can be directly pasted on walls, floors, bathrooms and sinks composed of gypsum board, plywood, MDF, indoor and outdoor cement or masonry substrates, and even new tiles can be covered and pasted on the base of old tiles.

Construction amount: 3-5 kg per square meter of tiles and mosaics (depending on the flatness of the substrate).

Before paving ceramic tiles, the following points must be done: the surface of the base must be clean, dry, no oil stains, and no loose sanding; Because the tile adhesive is the most significant with a thin layer of paste, the base must reach a certain degree of flatness, if the base surface is uneven, it must be leveled with 1:3 cement mortar or self-leveling cement.

After the base surface is flattened, a paint brush or a barrel must be used to coat the multi-functional primer on the base surface, which not only reduces the water absorption of the base material, but also strengthens the adhesion between the base material and the paving object; After the primer is dry by hand, you can use a special adhesive for ceramic tiles to pave tiles.

According to Qeeka Home experts, marble glue mainly uses two raw materials, one is epoxy resin, and the other is unsaturated resin, because unsaturated resin can make marble glue can quickly achieve the curing effect even in a humid environment, so it is often used in various construction projects. So, can marble glue stick to tiles? What are the well-known brands of marble gum?

Let's take a brief look at it together.

1. Can marble glue stick tiles?

Yes, marble glue has strong resistance, fast curing speed, high hardness, and is not easy to turn yellow, suitable for pasting and cracking repair between various stones, but because of its poor water resistance, it is easy to shrink during the curing process, so it is not suitable for large-area paste.

2. What are the well-known brands of marble gum?

1. Demaxi: The brand was founded in 1999, headquartered in Shanghai, the products use high-quality materials, coupled with sophisticated technology, to develop high-quality stone dry hanging glue, because it has a good impact resistance, anti-aging effect, so it has been recognized by many consumers.

2. Dalibao: The brand was founded in 1997, headquartered in Suzhou City, Jiangsu Province, is a high-quality enterprise company specializing in construction adhesives, and its factories can produce 100,000 tons of adhesives per year, so it is also a well-known business in China.

3. Hercules: The brand was founded in 1997, headquartered in Wuhan City, Hubei Province, in addition to attaching importance to the quality of products, but also attaches great importance to trademark strategy, the company was established only two years, applied for a brand trademark, and applied for its own patent five years later.

4. Pelco: Founded in 1995 and headquartered in Shanghai, the brand has two large-scale production bases, of which Jinshan base is responsible for the production and research and development of various stone binders, while Qidong base is mainly responsible for the research and development and production of electronic chemical processes, with strong enterprise strength.

Summary: The above about marble glue can stick tiles, and the well-known brands of marble glue are introduced here, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.

Marble glue is a special glue, which is mainly used to bond marble, granite and other stone rubbing. However, whether it is suitable for sticking tiles also needs to be decided on a case-by-case basis.

First of all, marble glue has a very strong bond and is able to form a strong connection between the stones. Ceramic tiles are generally thinner and lighter than stone, so marble glue can theoretically be used to paste tiles. However, the following points should be noted:

First of all, the surface of the tile is usually smooth, and marble glue may not get enough adhesion on a smooth surface. Therefore, before using marble glue to paste tiles, it is recommended to sanding the surface of the tiles first to increase the adhesion.

Secondly, the size of the tile is usually large, which means that a certain amount of support is required to ensure the stability of the bond. Before attaching tiles, brick wall grids or other supporting materials can be used on the wall to enhance the support and prevent the tiles from falling off.

Finally, for some special tiles, such as marble tiles, or tiles with special textures, marble glue may not provide enough adhesion, so it is recommended to choose a glue that is suitable for the tile material and texture when choosing a glue.

All in all, marble glue can theoretically be used to paste ceramic tiles, but it is necessary to pay attention to the sanding treatment of the tile surface and the enhancement of the supporting force to ensure the stability of the bonding. When choosing a glue, it is recommended to choose the right glue according to the material and texture of the tile to get a better effect.

Is it better for the metal to stick to the tile ab glue or marble glue that is firm Hello, dear, <>

AB glue is good, the two kinds of glue are not very firm to the metal and tile bonding, and it is recommended to use silicone structural adhesive is a better pin for the base. Strong firmness. Compared with AB glue, marble glue should be more solid than AB glue.

Because the viscosity of AB glue is very strong, and the waterproof and corrosion resistance are also very good, even if it is a long time, it will not be deformed and degummed, so it will have more advantages and is often used in many buildings. Marble glue is actually a very good material, but marble glue is not as strong as AB glue, and it must also be AB glue** more expensive and more stable in nature. Generally, the family conditions are better, and the materials used may be better, so it will be better to use AB glue when connecting the stone.

Hope it helps!