Laptop boot card logo? Laptop boot stuck at logo, what s going on??

The computer has been stopped at boot and left in the motherboard logo interface, which means that problems were found in the self-test process of power-on, and they need to be checked one by one, and only after solving the problem can DAO enter the system normally.

1. If you can't enter the system when you boot up the motherboard logo, you need to restart the TAB button to skip the logo screen or press the DEL key continuously (F2 or other designated hotkeys for the notebook) to enter the CMOS setting interface, and turn off the Full Screen Logo Show in the Advanced BIOS Features tab to see if the POST information can be displayed, and then determine the problem.

2. Under normal circumstances, according to the prompt information of the black screen and white characters on the screen, press the F1 key to skip the non-fatal error and start the computer directly, or press the del key to enter the CMOS, and then press F9 to load the predefined parameters or select Load Optimized Defaults (load the high-performance default) or Load Fail-Safe Defaults (load the fail-safe default), and then press F10 to save and exit the restart.

3. If the original CMOS parameters are not saved or the system time in CMOS is restored to the factory time after the shutdown and power off, it may be that the motherboard battery is invalid, and the battery needs to be replaced, and then load the predefined parameters and save them according to step 2.

4. If the above operations are invalid, it means that there is a problem with the hardware, generally due to poor contact of the memory due to oxidation, or the hard disk may be damaged due to poor connection or hard disk master boot record, you need to re-insert the memory or hard disk, or repair the hard disk master boot record, or reinstall the system or replace the hard disk.

If the laptop is stuck in the logo after booting, it means that your mobile computer has crashed and you need to turn it back on.

Try the following:

1. Enter Windows RE recovery mode.

If you boot three times abnormally, you can enter Windows RE recovery mode. The specific operation method is as follows:

Press and hold the power button for 10 seconds to turn off the Shiling Zhibei.

Press the power button again to turn on the device.

As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

While Windows restarts, press and hold the power button for 10 seconds on your device.

Press the power button again to turn on the device.

Let the device reboot completely to enter WinRe.

2. From the selection option, click Troubleshoot.

3. Select Advanced Options, and then select Auto-Repair.

1. This kind of problem may be caused by external devices first, unplug all the equipment of the computer, including the keyboard, mouse, USB flash drive, and even the keyboard and mouse of the PS2 interface, and only leave the ** line of the monitor, and then restart the machine;

2. Secondly, the motherboard error may also cause the computer to be stuck in the motherboard logo, you can restore the BIOS to factory settings, if you can't set the BIOS or can't enter the BIOS, then directly remove the motherboard battery and install it back, you can restore the BIOS settings to the default settings;

3. Then the damage of the hard disk or hard disk data cable may also lead to this problem, the hard disk will not be able to pass the motherboard logo when it is not detected, you can unplug the hard disk and reboot it, if the problem no longer appears, it means that it is a problem with the hard disk or hard disk data cable;

4. Finally, the motherboard or memory failure will also cause the boot to stop at the motherboard logo, wipe the gold finger after removing the memory module, and then plug it back in, if the computer has multiple memory installed, then only keep one memory module at a time and try alternately until you find out the memory module in question, the motherboard problem is caused, you need to send it for after-sales repair or replace the new motherboard.