What is the best way to fly with spray technology now? As the title suggests, thank you

One. Optimized drift 1↑+2.

shift(shift-tap, the shorter the better) 3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire) (1-3 steps must be fast) II.

Double Squirt 1+shift (Optimized Drift) [First Drift] 2Back direction) 3.

shift (two-key tap, the shorter the better) [second drift] 4+ Immediately return to the direction and breathe fire for the first time) 5.(Second Spitfire) (The two drifting wheel prints cannot be connected, and the interval between the two drifting wheel prints should not be too large) Three.

Spray 1+shift (optimized drift) 2Back direction) 3.

shift (two-button tap, the shorter the better) 4+ Immediately return to the direction and breathe fire) 5.→+shift 6.

Repeat 3 or 4 steps to finally (continuous spraying is the continuation of double spraying, double spraying repeatedly) four. Link Double Spray 1+shift (Optimized Drift) [First Drift] 2

Back direction) 3.+shift (three-button tap, the shorter the better) [second drift] 4+ Immediately return to the direction and breathe fire for the first time) 5.

The second Spitfire) (The biggest difference between LINK double spray and ordinary double spray is in step 3, the bending speed of LINK double spray is faster than the bending speed of ordinary double spray) Note: 1-3 steps"↑"It's been pressed five. link spray 1

+shift (optimized drift) 2Back direction) 3.+shift (three-button tap, the shorter the better) 4

+ Immediately return to the direction and breathe fire) 5.↑+shift 6.+ Repeat 3,4 steps to finalize

At the end of the drift, pull the head of the car in the opposite direction, and then connect it to spray... You can repeat the steps of the first two steps and spray it down. . .

Step 1: Press ( ) to enter the drift state in the process of normal progress, and ( ) can be pressed earlier than (shift), it should be important to point out here that in order to spray successfully, the time of holding down (+shift) must be well controlled, longer or shorter. This time is a feeling problem, and it's not easy to explain in the post, which is also a reason why many people can't successfully spray after reading the order of the buttons.

Here you can tell you a rough way to judge the length of time by observing the drift trajectory with your eyes: The two trajectories must not coincide, and there is always an interval of a certain distance between them during the spraying process, and this interval also needs to be felt, and everyone should keep them not overlapping at the beginning; (Turn right) to see the angle between the kart and the right track, hold down (+shift) until the angle between the kart and the right track is about 145° (I haven't measured the specifics, let's practice more by yourself). Step 2:

After pressing (+shift) for a certain period of time, release (+shift), and press ( ) to control the angle between the car and the trajectory at the same time as the release (until this time it has been pressed, and never send, it plays a role in the process of controlling the angle between the car and the track). If the time control of pressing (+shift) in step 1 is correct, you only need to press ( ) briefly and then quickly release (all keys) and then press ( ) quickly to blow for the first time, if the time control of pressing (+shift) in step 1 is correct, the interval between the two tracks will not change much when pressing ( ), I define the interval of this specific distance as (interval p),

If you press (+shift) for too long, the interval between the two tracks is too small

When accelerating, the car doesn't drift too much like when cornering, but this is very demanding.

Install it by hand to shift,,Don't put it in the add,,,Up to 3 sprays。 Thank you.

Don't learn it, at most use three sprays, and you basically don't need continuous sprays in flying cars.

Press the drift for a long time, and then press twice for a small spray.

Even spraying on the flying car does not apply at all! Three sprays in a row is the same as a hundred sprays in a row! Just out of an acceleration! Very inappropriate! If you have to use drip words! It's the same as a go-kart drop!

After drifting through a corner, [drift do not let go], press the reverse arrow button to pull the front of the car, press the front button twice, you can achieve double spray! I don't know how to add me q1968195872

After floating, press the drift key to spray in and release the drift key in the spray! That's it!

Three. Spray.

1.+shift (optimized drift).

2.back direction).

3.shift (two-button tap, the shorter the better) 4+ Immediately return to the direction and breathe fire).

5.→+shift

.Repeat 3 or 4 steps.

Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

A variety of spraying methods can be used in the competition, and there are several shortcuts to victory:

1.Small spray, quickly reverse the direction after each drift, stop drifting, by the way, let go of the forward, and then press forward again, (note, hold down and don't let go) otherwise the spray will be gone, the time is very short.

2.In the track flying over the Great Wall, it is used in air spraying, small spraying, floor spraying, double spraying, etc.

Air spray: It is more obvious in the flight over the Great Wall, every time you cross a slope, you can carry out air spraying while you are not landing, and the method is the same as the second half of the small spray.

Floor spray: Same as air spraying, just spray it again after using up the air spray. It will affect your performance (increase).

Double spraying: obvious in the autumn name mountain or western mines, continuous drift, spray twice, the method is the same as above.

This is a small experience of mine, I hope it will be helpful to you.

Thanks, hope.

Double spray, that is, drift twice in a row, spray twice.

Brother! Brother will teach you all night at 10 o'clock in the evening!

2.+shift (Shift-tap, the shorter the time.)

3.After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

The 1-3 step connection must be fast).

Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Two-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The wheel prints of the two drifts should not be connected, and the interval between the wheel prints of the two drifts should not be too large) three. Spray. 1.+shift (optimized drift) 2back direction).

3.+shift (Two-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.→+shift

Repeat 3 or 4 steps.

Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

Four. Double spray.

1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (Three-key tap, the shorter the time.)

Second Drift].

4.+ Immediately return to the direction and breathe fire for the first time).

5.Grip tassel (second fire-breathing).

The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

Note: 1-3 steps"↑"It's always pressed.

Five. link spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (Three-key tap, the shorter the time.)

4.+ Immediately return to the direction and breathe fire).

5.↑+shift

Repeat 3 or 4 steps.

Finally, I wish you a great time, thank you!

1) The method of QQ speed double spray is the same as running.

The fingering is as follows: shift (while pressing with the buried).

Pull back the head) +shift and drift again.

Squirt for the first time. Shunting head).

Matsuichi. before a second spray can be carried out.

Avoid. I tried it in QQ Speed.

Definitely squirts.

But it doesn't feel necessary.

The double spray in the running is to collect gas faster.

But this feature is not obvious in QQ Speed.

It can be a little difficult to practice at first.

A word of caution.

The second drift must be at the moment when the first one ends!!

This is the fundamental reason why I didn't squirt out in the two hours I started practicing!!

This is very, very important!!

2) When cornering, +shift or +shift will be sprayed after drifting, generally only press spray, even spray to press together with shift, there will be a situation of spraying first and then continuing to drift, and then press spray, that is, even spray. Note: The spray is drifted 2 times, and the traces of the two drifting sparrows are connected together, and they can't be sprayed when they are disconnected! ~

QQ speed perfect drift method (QQ speed is different from running kart, do not press shift for a long time when drifting, but short so that the drift will be more cautious and smooth).

Optimal Drift: Shift (Shift must be very light) (Pull back the head).

Jet) company. Drift: Shift

Pull the head) + shift (here is the first drift of the jet and shift is the entry of the second drift).

Break. Bit: shift

shift (at the end of the first drift, shift tap) (jet) double.

Spray: Shift

Pull back the head of the car (no spray, because the first drift can be sprayed once, but you can't spray here] + shift (the first drift immediately into the wide skin into the second drift, remember: the drift here can not be pointed).

(due to the first drift, here is the first drift of the jet, and the head of the cart is pulled) (the second drift of the jet).

Join. Spray: Shift

Pull back the head of the car (do not spray, because the first drift can be sprayed once, but not here) + shift (the first drift immediately into the second drift, note: the drift here can not be pointed) + due to the first drift, here is the first drift of the spray, but the head of the car) + shift

(Repeating these two steps is a continuous spray).

If you're talking about a super start, it's a little float at the moment you rush out after the end of 1.

To put it simply, when the first drift is over, when you spray a high grip, hold down the shift and gently press the "Jian or" "Jian " "Jian without letting go", and then let go of the "Crack Qing" "Jian and" "Jian or" "Jian together! Swim as you let go" and you'll be sprayed for the second time. Remember, Shift Jian must not let go!!

The continuous spray technique is very simple. As long as you are proficient, it will be good.

Go to the Internet to search kati karting classroom, there is a teaching you how to burn and scatter spray.

L-type broken continuous spray.

Fingering: 1↑→shift

1,2 is an ordinary break float, press 2 shifts] 2.←↑shift

3.shift [the last ordinary break of the firefire and the first light digging slow break drift of the positive drift]3,4 process, shift is not loose].

4.shift[the first light break float of the drift]5Shift [the first light break of the Spitfire and the second light break of the positive drift]5,6 process, shift is also not loose].

6.Shift: Repeat steps 3 to 6 to form a continuous spray.

C-type continuous spray. (shift+↑+

shift+→)

Peel off) breathing fire.

+ Note: 4, 5 should be pressed quickly.

shift+→)

(Spitfire).(Spitfire).

D-type continuous spraying. (shift+↑+

shift+→)

shift+→)

(Spitfire).

When you are elegant, Chang Accompany holds down the [Shift] key, don't put it, after floating over, hold down the forward button, and quickly press the [Shift] button to laugh early.

Lian Piao: Introduction: Lian Piao is to exert the drift skills to the limit.

You can use Lianpiao to pass through the large curves in the forest hairpin with a few small drifts, and you can quickly accumulate N2O, so that you can truly experience the joy of drifting! But there is a caveat!

Method:1It's still the same as before, press shift first to enter the normal first drift state.

2.Get on the right track! (Don't put scum on the wheel!) ）3.Press Shift to perform the first fire-breathing and start the second drift!

4.Get on the right track! (Don't let go either!) Tong Kai.

5.Shift for a second fire-breathing and a third drift!

In this way, the first Lian Piao is like filial piety! It should be noted that step 3 is separated from step 5 and shift about a second. It's no different from pressing together! Repeat 4 and 5 after the first fluave is completed....Keep repeating! You can do it even if you can!

Many friends report that they can't spray it like a master when they are drifting in a short range In fact, it's very simple, but it's a continuous spray first, and then a short-range drift and fire-breathing! ～～