-
Anonymous users2024-02-08The first mode: A mode A mode WC spray is premised on you have to have an N2O for acceleration. After the car drifts to the appropriate position after cornering (the position where you think you can use N2O to accelerate after drifting), immediately press the Ctrl key to use N2O to accelerate, and at the same time press the W key (first spray) while holding down the Shift key, then release the Shift key, and then press the W key (second spray), the process of A mode WC spray is completed, remember that the key must be held down all the time.
Fingering analysis [for reference only]: 1, 2, Shift 3, 4, Shift 5, Shift + CTRL 6, W + Shift 7, W 8, A mode WC spray, the purpose is to increase the limit speed of the car, which can speed up the car to some extent. However, it shortens the running distance of double spray + air, which is a disadvantage.
Generally speaking, if the runway is long enough, it is not more affordable than dual jet + gas. The second mode: B mode B mode WC spray is not required.
After the car drifts to the appropriate position in the corner, press the W key (the first spray) while holding down the shift key, at the moment when the first spray ends, release the shift key, and immediately press the Ctrl key to use N2O to accelerate, and then press the W key (the second spray), the process of WC spraying in B mode is completed, remember that the key must be held down all the time. Fingering analysis [for reference only]: 1, 2, shift 3, 4, shift 5, w + shift 6, ctrl 7, w 8, b mode wc spray basic operation is the same as above, but in it, the speed of the button is also related to n2o.
The B mode is the most practical one. The third mode: C mode The premise of C mode WC spraying is that you have to have an N2O for acceleration.
The car uses N2O before cornering (of course, the use of N2O in ** depends on the track), and then uses W double spray when drifting to the right position (W double spray is a small spray with W key when double spraying, you should know it!) ), C mode WC spray is done, remember that the key is to be held down all the time. Fingering analysis [FYI]:
1, 2, Ctrl 3, Shift 4, 5, Shift 6, W + Shift 7, W 8, C mode The advantage of WC spray is that it can instantly reach about 290-305 speed (razor), and the disadvantage is that the acceleration time is relatively short, because W dual spray is fused in N2O. In fact, C mode WC spray is the least used, and the scope of application is also the smallest, which is a mode rarely used. Thank you.
-
Anonymous users2024-02-073 spray can't work, you must be in a continuous corner, first single spray and then drag drift and then a double spray.
-
Anonymous users2024-02-06Step 1: Press ( ) to enter the drift state during the normal progress process, and ( ) can be compared to (shift).
It is important to point out here that in order to successfully spray, the time of holding down (+shift) must be.
It's well controlled, long or short. This time is a matter of feeling, and it is not easy to explain in the post, which is also very.
One reason why many people can't successfully spray after reading the order of the buttons. Here I can tell you a rough observation with the eyes.
Drift tracks to determine the length of time by (+shift): The two tracks must not coincide with each other in the process of spraying.
There is always a certain distance between them, and this interval also needs to be felt, and at first everyone keeps them without overlapping.
Good; (Turn right) to see the angle between the kart and the right track, hold (+shift) until the angle between the kart and the right track.
It's about 145° (I haven't measured the specifics, so let's practice it yourself).
Step 2: After pressing (+shift) for a certain period of time, release (+shift) and press ( ) to control the car and rail while releasing it.
The angle of the track (up to this point has been pressed, and never sent), in the process of controlling the angle between the car and the trajectory.
If the timing of pressing ( +shift) in step 1 is correct, only a short press ( ) is needed and then quickly released.
On (all keys) followed by a quick press ( ) to get the first jet, step one in the press ( +shift) time control positive.
Indeed, the interval between the two trajectories will not change much when I press ( ), and I define the interval for this particular distance as (interval p
If the interval between the two tracks is too small after pressing ( +shift) for too long, after pressing ( ), there will be two tracks.
A process of obvious enlargement, until the expansion reaches (interval p) will be ejected by pressing ( ); ②
If you press ( +shift before
The time is too short, the interval between the two trajectories is still relatively large, and after pressing ( ), the drift will be terminated, and some will not be able to talk about.
Step 3: After correctly controlling the time of pressing (+shift) in step 1, you can perform the first spray according to the instructions in step 2.
Gas. If you press ( ) instead of ( ) on the last step but quickly press ( +shift) to spray and float at the same time, press ( +
shift), quickly release ( +shift) (do not release ) while briefly pressing ( ) and then quickly release (all.
of the key) quickly press ( ) to get a second jet. If you press (+shift) quickly, you will be ready to enter the third jet at the same time as the second jet.
-
Anonymous users2024-02-05Just turn, spray it, and then drift, the elegant key is not loose, and after turning over, it will be double sprayed, which is the so-called three sprays, and I suggest it to the lord of the tower.
-
Anonymous users2024-02-04Three sprays are useless, double sprays are the best and most practical, masters are double sprays, three sprays are just a good name, and it will only waste time to use!
If you think I'm right, I wish you a safe family!
-
Anonymous users2024-02-03Optimize drift.
2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).
The 1-3 step connection must be fast).
Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).
3.+shift (two-button tap, the shorter the better) [Second Drift]4+ Immediately return to the direction and breathe fire for the first time).
5.(Second Spitfire).
The two drifting wheel prints should not be connected, and the interval between the two drifting wheel prints should not be too large) three. Spray. 1.+shift (Optimize Drift)2back direction).
3.+shift (two-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).
5.→+shift
Repeat 3 or 4 steps.
Finally, the continuous spray is the continuation of the double spray, the repetition of the double spray).
Four. Double spray.
1.+shift (Optimized Drift) [First Drift] 2back direction).
3.+shift (three-button tap, the shorter the better) [second drift]4+ Immediately return to the direction and breathe fire for the first time).
5.(Second Spitfire).
The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).
Note: 1-3 steps"↑"It's always pressed.
Five. link spray.
1.+shift (optimized drift).
2.back direction).
3.+shift (three-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).
5.↑+shift
Repeat 3 or 4 steps to your satisfaction. Thank you.
-
Anonymous users2024-02-02Drift first, then spray with double spray, and then spray with oxygen.
-
Anonymous users2024-02-01You just need to master the double spray. Dual sprays are required to impose a drift assist on a spray. Instead, it slows down the average speed.
-
Anonymous users2024-01-31After the end of the double spray, then drift in the opposite direction, the drift is not loose, and after the end, put the drift at the same time on the upper and lower points.
-
Anonymous users2024-01-30Hello, the landlord is happy to serve you.
One. Optimize drift.
2.+shift (shift tap, the shorter the better)3Immediately after clicking shift, return to the direction, speed.
degree to be fast) 4.(Spitfire).
The 1-3 step connection must be fast).
Two. Double Spray: After the "drifting" of the car is finished in QQ Speed, clicking the "Forward" button will have the effect of accelerating the hail hall button (similar to the effect of using N2O).
The duration is short-lived, though). Repeating the above operation twice in a row is called "double spraying".
1.+shift (Optimized Drift) [First.]
sub-drift] 2.back direction).
3.+shift (two-button tap, the shorter the better) [Second Drift]4+ Return to the direction immediately, and first.
A Spitfire) 5.Yuan Qiao (second fire-breathing).
The two drifting wheel prints should not be connected, and the interval between the two drifting wheel prints should not be too large) three. Spray. 1.+shift (Optimize Drift)2back direction).
3.+shift (two-key tap, the shorter the better) immediately burns back in the direction and breathes fire).
5.→+shift
Repeat 3 or 4 steps.
Finally, the continuous spray is the continuation of the double spray, the repetition of the double spray).
-
Anonymous users2024-01-29Yes. One. Optimize drift.
2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).
The 1-3 step connection must be fast).
Two. Double spray. 1.Dress up + + shift (optimized drift) [first drift] 2back direction).
3.+shift (two-button tap, the shorter the better) [Second Drift]4+ Immediately return to the direction and breathe fire for the first time).
5.(Second Spitfire).
The two drifting wheel prints should not be connected, and the interval between the two drifting wheel prints should not be too large) three. Spray. 1.+shift (Optimize Drift)2back direction).
3.+shift (two-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).
5.→+shift
Repeat Tongchun to do 3 or 4 steps.
Finally, the continuous spray is the continuation of the double spray, the repetition of the double spray).
Four. Double spray.
1.+shift (Optimized Drift) [First Drift] 2back direction).
3.+shift (three-button tap, the shorter the better) [second drift]4+ Immediately return to the direction and breathe fire for the first time).
5.(Second Spitfire).
The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).
Note: 1-3 steps"↑"It's always pressed.
Five. link spray.
1.+shift (optimized drift).
2.back direction).
3.+shift (three-button tap, the shorter the time, the better) 4+ Immediately return to the direction and breathe fire).
5.↑+shift
Repeat 3 or 4 steps. Finally
Press at the moment when the countdown is three seconds to 1 is about to end, the car will start with a small spray, which is the ability that novices should have, and then wait for the time to play drifting, you can add a small drift when you start countdown, because the speed is 0 at the beginning of the start, but there is a minimum speed when drifting, probably close to 100, so the small drift start is also called super start, which can make your car quickly reach the speed of 100, lz more practice will be, you can also refer to the online teaching**, there are a lot.
QQ Speed is a game customized and developed according to a strict physics system, and it is hard to learn physics knowledge, and the basic concept and practical effect of modification can be reflected. There is a lot of knowledge involved in this aspect of modification skills, and it is not just as simple as the ,.. of online and other people's commentsJust take an example: >>>More
Use the drift to support the props to run, and the drift key cannot be light.
That's the case, hold down shift when you drift, and then let go of the left and right arrow keys, press w, don't let go of shift in this process, after spraying, immediately release shift, and then press w and spray again, in this process must be kept good not to hit the wall, double spray is easier to hit than single spray, to practice more.
Double spray: shift (optimize drift) shift (the first drift immediately into the second drift, note: the drift here can not be pointed) due to the first drift, here is the first drift of the spray, but is the head of the cart) spray the second drift) continuous spray: >>>More