Why is it better to spray faster than not to spray at all?

Updated on healthy 2024-03-30
6 answers
  1. Anonymous users2024-02-07

    Double spray: 1Press Shift to enter the normal drift state.

    2.Release and then [do not move], and straighten the front of the car (the first part cannot let go of the accelerator).

    3.Release the throttle and press only the two SHIFT keys to perform a second drift (note: this step is more critical!). If you press the throttle, you can.

    This can lead to a premature fire-breathing.

    4.I straighten the front of the car and breathe fire!

    Note: This is not about seconds between this and the previous step].

    5.Let go, then quickly press for a second firethrow! [release and press the second]! Double spray.

    Spray. Introduction: Lian Piao is to bring the drift skills to the highest level. With the use of the continuous drift, it is possible to drift through the forest hairpin at a few small angles.

    Large-angle corners, and can quickly accumulate N2O, so that you can really experience the joy of drifting! But there is a caveat!

    Method:1It's still the same as before, press shift first to enter the normal first drift state.

    2.Get on the right track! (Medium Don't let go!) )

    3.Press Shift to perform the first fire-breathing and start the second drift!

    4.Get on the right track! (Don't let go either!)

    5.Shift for a second fire-breathing and a third drift!

    The third Spitfire.

    The fourth drift ......[You're still breathing fire in the middle of the ticket].

    In this way, a continuous spray is formed! It should be noted that the interval between steps 3 and 5 and shift is about a cabinet second. It's no different from pressing together!

    Repeat 4 and 5 when you're done....Keep repeating! It's just a fake spray!

    Many friends reflect that "when you are floating, you can't spray it like a master for a short distance", but it is actually very simple, but it is a spray first. Then a short drift and a fire-breathing! ~~

    Some people said, "Yes, yes, but it won't hit the wall, and it won't hit it in a row." This is very simple, and students who will pay special attention to this.

    Let's talk about the small medium u first; Blocking Wang because of Chongpei is a small U can not be sprayed.

    The angle of one vote is 'about' about 26 degrees.

    Spray once and then spray continuously.

    The forward time is about a second less than that in the reverse.

    Forward is not a matter of whether you have a reverse angle or a positive angle] for example.

    The only thing that is the opposite angle is the dispersion balance'<

    So. is a positive angle.

    Let's talk about U, the angle of one vote is about 22 degrees. Remember, the base degree reversal should refer to "Seconds" by multi-point. No short spray is required, direct spraying.

    Big U, 1 vote about 18 degrees, and then sprayed].

  2. Anonymous users2024-02-06

    You go and see this, you can practice for 5 minutes!

  3. Anonymous users2024-02-05

    1.Press Shift first to enter the normal first drift state.

    2.Pull back the front of the car and grasp the good direction of the plum pants! (Medium Don't let go!) )3.→+shift

    The second drift (note that at this time, Lu Jian does not press ).

    4.Spit fire and pull back the head of the car.

    5.→+shift

    The third drift.

    Repeat 4,5, if the bend is not very big, after the end of the 4th step, you can press the beam again, it is an ordinary double spray, even after the spray is a double spray ending in the double spray There are many kinds of double spray, which is the simplest

  4. Anonymous users2024-02-04

    Introduction: Lian Piao is to play the drift skills to the limit. You can use Lianpiao to pass through the large curves in the forest hairpin with a few small drifts, and you can quickly accumulate N2O, so that you can truly experience the joy of drifting!

    !But there is a caveat!

    Method:1It's still the same as before, press shift first to enter the normal first drift state.

    2.Get on the right track! (Medium Don't let go!) )

    3.Press Shift to perform the first fire-breathing and start the second drift!

    4.Get on the right track! (Don't let go either!) )

    5.Shift for a second fire-breathing and a third drift!

    drift (also known as cutting drift).

    Introduction: Cutting

    Drift, as the name suggests, is to use the shift button to control the angle of the front of the car in the drift process to swing back to the front of the car at high speed in the drift, so that the drift ends as soon as possible, and the effect of better saving N2O is achieved

    Method: In fact, it is very simple, that is, when the drift is about to end, press a short time to drift back once, and then make the last step of continuous spraying at the end! However, you need to pay attention to the time when you press shift (i.e., drift back).

    If you master it well, you will achieve the desired effect, and if you press shift too early, it will cause the front of the car to not swing back! Can't cut off the drift! Pressing shift too late will cause the system to misjudge that you are drifting twice, and finally you can't breathe fire!

  5. Anonymous users2024-02-03

    1.↑+

    2.+shift (shift tap, the shorter the time) 3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

    The 1-3 step connection must be fast).

    Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

    3.+shift (Two-key tap, the shorter the time.)

    Second Drift].

    4.+ Immediately return to the direction and breathe fire for the first time).

    5.(Second Spitfire).

    The wheel prints of the two drifts cannot be connected, and the interval between the wheel prints of the two drifts should not be too large) TOP1 is purely entertainment new.

    If you don't understand, please ask questions 1-on-1.

    QQ Speed Icon Lighting Rules:

    As soon as you reach level 12 in the game, accumulate 1800 Cool Coins, and complete Mission 2 (experience accumulation to level 12), the icon will automatically light up instantly.

    Three. Spray. 1.+shift (optimized drift).

    2.back direction).

    3.+shift (Two-key tap, the shorter the time.)

    4.+ Immediately return to the direction and breathe fire).

    5.→+shift

    .Repeat 3 or 4 steps.

    Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

    Four. Double spray.

    1.+shift (Optimized Drift) [First Drift] 2back direction).

    3.+shift (three-key tap, the shorter the time) [second drift].

    4.+ Immediately return to the direction and breathe fire for the first time).

    5.(Second Spitfire).

    The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

    Note: 1-3 steps"↑"It's always pressed.

    Five. link spray.

    1.+shift (optimized drift).

    2.back direction).

    3.+shift (three-button tap, the shorter the time) 4+ Immediately return to the direction and breathe fire).

    5.↑+shift

    .Repeat 3 or 4 steps.

  6. Anonymous users2024-02-02

    Drift a little, and then a spray, after adjusting the direction, press forward and another spray, and then float a little more and you can spray... Big brother helped me adopt it, thank you.

Related questions
15 answers2024-03-30

Problems with continuous spraying;

Don't go fast when practicing spraying, you can spray it slowly. >>>More

9 answers2024-03-30

1 Pull down the notification bar from the top of your phone's screen, then switch to Switch. >>>More

11 answers2024-03-30

After authentication, you can only surf the Internet normally.

6 answers2024-03-30

Based on the maintenance experience and the characteristics of the model, the reasons for burning engine oil can be roughly summarized as follows: 1. Because the domestic fuel quality is not synchronized with international standards, it is easy to form a large amount of carbon deposits in the combustion chamber during engine driving, and carbon deposits are an important reason for various engine problems such as engine oil burning. 2. Carbon deposits will be deposited in the grooves of the piston, causing the piston rings to stick together, which will cause the piston rings to be stuck and unable to be completely sealed, and the oil will enter the combustion chamber and burn off, while the "sticky" piston rings greatly reduce the ability to scrape oil seals, and the oil that has not been scraped off will also be burned off. >>>More

27 answers2024-03-30

Snatching up all the heads of your teammates can't carry your teammates like this You are embarrassed to talk. Look at the opposite side or the economic average. Either that, the teammate who got the head carried the whole team.