Which manufacturers are good for optical drives and recorders? What brand is good?

Updated on number 2024-04-06
10 answers
  1. Anonymous users2024-02-07

    The Pioneer burner is good.

  2. Anonymous users2024-02-06

    Ordinary optical drives can only be burned **. The burner is CD-R, which is the abbreviation of English CD recordable, which can be divided into two types: one is CD burning, and the other is *** burning.

    The CD-R disk used is generally 730MB. The information recorded on it is the same as that of a general CD disc, and it also uses the reflection of the laser beam to read the data, so the CD-R disc can be read on the CD-ROM, but the difference is that the CD-R disc can be written once. When burning a CD-R disc, the recorder emits a high-power laser that focuses on a specific part of the CD-R platter, causing a chemical reaction in the organic dye layer of this part, so that this part cannot reflect the laser emitted by the optical drive, which is equivalent to that on a traditional CD disc"Concave";The place that is not illuminated by the high-power laser can reflect the laser according to the *** layer, which is equivalent to the traditional CD disc"Non-concave", the disc engraved in this way is basically the same as the reading principle of a regular CD ROM.

    The CD-R disc uses organic dyes as the primary material for the recording layer. The most common ones on the market are green and gold discs, which are made of two organic dyes, cyan blue and golden yellow, respectively. In addition, there is a blue disc on the market, which uses an organic dye called azo that uses silver as a reflective layer.

    Which platter is better? Many people think that the use of gold plates has a good effect and high quality, but in fact, this view is very one-sided, and each plate has its own characteristics. When it comes to choosing a CD-R platter, all three types of platters can be purchased with confidence.

    At present, most recorders support not only the disk at once method, but also the track at once writing mode. When using the whole disk burning method, the user must write all the data to the CD-R disk at once, and if the data prepared is small, burning a disk will inevitably cause a lot of waste. This waste can be avoided by using orbital engraving, which allows a single CD-R disk to be burned multiple times if there is extra space.

    Now there is a CD-RW burner and disc on the market, this CD-RW can be erased, and the erase times can be as high as more than 1,000 times It should be noted that both CD-R and CD-RW must use special burning software to record data on the disk. For example, Easy-CD Pro, etc., this kind of software is usually shipped with the purchase of a recorder.

  3. Anonymous users2024-02-05

    The recorder can do all the things of the optical drive and can also burn discs, but ordinary optical drives can't, hehe, so when installing the machine, it is recommended to spend dozens of dollars more to buy a recorder

  4. Anonymous users2024-02-04

    A burner is a type of optical drive that indicates that it can burn discs, that is, it can make a blank disc into a disc with the content you need.

  5. Anonymous users2024-02-03

    Very well, the recorder can save files to a disc and also read the disc. The optical drive can only read discs.

  6. Anonymous users2024-02-02

    A burner is an optical drive with the function of burning (moving some files to a disc).

  7. Anonymous users2024-02-01

    The burner can burn discs.

  8. Anonymous users2024-01-31

    1. Pioneer (founded in Japan in 1937, the world's leading brand of audio-visual entertainment and optical disc technology, invested by Pioneer Electronics (China)).

    2. LG (the world's top 500 enterprises, leading the world's industrial development of international enterprise groups, the third largest company in South Korea, LG (China) ****, the top ten brands of Blu-ray recorders).

    3. Sony (in 1946, the world's leading brand of high-end imaging, a world-renowned brand, a leading brand in the information technology industry, Sony (China)****).

    4. Panasonic (in 1918, the world's top 500 enterprises, large multinational companies, the world's largest electronics manufacturers, Panasonic (China)****).

    5. ASUS (in 1990, the world's Fortune 500 company, one of the world's leading 3C solution providers, ASUS Computer Co., Ltd.).

    6. Liteon (one of the largest manufacturers in the optical disc drive industry, one of the world's largest manufacturers of optical storage products, Liteon Electronics).

  9. Anonymous users2024-01-30

    Now the price of the recorder cabbage Unless you are sure that you will never burn anything, then you can buy the *** optical drive of the system.

  10. Anonymous users2024-01-29

    Drive.

    -rom, this one is read-only, i.e. it is only used to read data. Burner ***-rw

    This is where you can read the data, and you can use the *** burning disk to record your data. At present, there is not much difference between the two, and it is recommended to choose a *** recorder directly! Personal opinion, just for reference!

Related questions
4 answers2024-04-06

The speed of burning is determined by the slowest of the burners and burning discs. >>>More

6 answers2024-04-06

It can be said that all the recorders I bought in the past two or three years are supported.

9 answers2024-04-06

It may be because of the burning disc, such as the quality is not up to standard, etc., it is recommended to try a different brand of disc; >>>More

8 answers2024-04-06

Personal point of view U disk, the capacity is relatively small, easy to carry, **low, but sometimes there is no way to copy one, although there are 8 16g, but relatively speaking** is not very good There are also cheap ones, but the quality is not known It all depends on luck. >>>More

3 answers2024-04-06

CD-R disc is made of polycarbonate with a layer of dye sprayed on the base, and the laser head controls the power of the emitted laser beam according to the different engraved data under the control of software and hardware, so that part of the dye is decomposed by heat, and the reflective point that can be read is "burned" at high temperature on the blank general sheet. Because the dye layer cannot be restored after decomposition. >>>More