BenQ recorder can t perform the end action, what should I do?

It may be because of the burning disc, such as the quality is not up to standard, etc., it is recommended to try a different brand of disc;

Another reason could be that the burned content exceeds the capacity of the disc;

Or because the content you engrave is burned from a mobile hard disk, it is also easy to report an error at the end;

Then there is the problem of the recorder itself.,It's recommended to study the manual.,If it doesn't work, call Benq's customer service to ask.。

Please check the "Mock" and "Write" options

1.If the "Simulation" burning fails, please check the system problem, because the "Simulation Burning" can test whether the ** data (CD) is normal, whether the hard disk speed is fast enough, whether the remaining disk space is enough, and other normal conditions of the burning environment. If the simulation is not successful, we recommend that you do the following:

1) Organize the hard disk and turn on the DMA option for the recorder and hard disk.

2) Avoid burning files by network transmission, please burn them from the local hard disk.

3) Please make sure that the transfer speed of your hard drive is up to the required and the temperature is too high.

4) When burning, close all other applications, screensavers, and anti-virus programs.

5) Turn off the power management function.

6) Do not copy empty directories, files with a size of 0 bytes, or files that are also in use by the system.

7) If the number of files to be copied is more than 10,000 at a time, please create a disk image file and then burn it with this image.

8) Keep enough free space on your hard drive, at least twice as much space as the largest file you want to burn.

2.If the "simulation" succeeds but the actual write fails, the cause may be:

1) Blank platter, it is recommended to replace several discs, if some discs can, please use the platter with better matching;

BenQ China (》Service & Support 》Contact BenQ 》Service Network for inquiries, please pay attention to the service product column.

Read the manual, turn it off forcibly, if it doesn't work, throw it away.

Forcibly stop, re-drive the software, pay attention to the use of *** platter to try again, you can also take the recorder to other computer hosts to try, if the problem is still there, it can only mean that your recorder hardware has failed.

Hello zyhyt2000.

1) It is recommended that you can change the platter of different brands to see if it can be normal;

2) If other brands of platters can be used normally, it is likely to be caused by compatibility problems between individual platters and recorders, and it is recommended that you can replace other platters for use;

3) If other platters are unusable, it is recommended that you connect the recorder to a different computer and reinstall your nero software at the same time.

4) In addition, if you have poked the small hole on the front panel of the recorder, still can not go out of the warehouse smoothly, it may also be due to the aging of the belt out of the warehouse, the current warranty period of the recorder is one year, if during the warranty period, it is recommended that you can send the machine to the service center for testing, the information of the service center can be queried by the following operations: BenQ China ==> service support ==> service outlets==> select your product, province and city.

Benq Superman.

Hello, (1) It is recommended that you can change the platter of different brands to see if it can be normal;

2) If other brands of platters can be used normally, it is likely to be caused by compatibility problems between individual platters and recorders, and it is recommended that you can replace other platters for use;

3) If other platters are unusable, it is recommended that you connect the recorder to a different computer and reinstall your nero software at the same time.

4) In addition, if you have poked the small hole on the front panel of the recorder, still can not go out of the warehouse smoothly, it may also be due to the aging of the belt out of the warehouse, the current warranty period of the recorder is one year, if during the warranty period, it is recommended that you can send the machine to the service center for testing, the information of the service center can be queried by the following operations: BenQ China ==> service support ==> service outlets==> select your product, province and city.

Hehe, this kind of thing is hard to say! You've been buying it for so long!

Maybe it's fake, maybe it's fake! Now there are too many fakes, and it is not possible not to distinguish them! Maybe it's been a long time!! Like BenQ, Samsung, Sony, a lot of fakes!

If you use it often, he usually doesn't have a problem when he pours it, and I'm afraid that I won't use it for a long time.

(1) It is recommended that you try to change the disc of different brands to see if it can be normal;

2) If other platters can be normal, it is likely to be caused by compatibility problems between the platter and the recorder, and it is recommended that you can replace the platter.

3) If other platters cannot be burned, it is recommended that you can connect the recorder to a different computer, change the use environment of the recorder, and recommend that you reinstall your nero software to use;

4) If you have any questions, you can also call BenQ technical support**4008880666 for details.

Will it work properly every time I redo the system?