The problem of cell fiber network speed, the cell fiber is slow at night

1 All guys, you are a community fiber, and it eventually comes out through a switch, that is to say, everyone is using a water pipe, and the faucet is turned on more at night, and your small will naturally be smaller.

For P2P Terminators, the application is very simple, as long as you look at it, it will be, but it is not recommended to use it because it is somewhat inhumane.

You use the 2M** line is the ADSL Internet access method, which should be considered relatively independent, not separated from others, and the bandwidth can be said to be fixed, so there will definitely be no night card situation.

To sum up, the nature of your Internet access and access methods have created this problem, the first solution is to use P2P speed limiting, the second is to use ADSL exclusive bandwidth, of course, there is a third way, that is, to connect to optical Ethernet, but the third is not recommended, the cost is too high, and individual users generally can't afford it.

The network bandwidth will become smaller at night,I've made it very clear before,As for what you said is to set up the computer to improve the network speed,I guess it won't play a role,Because at this time, the slow Internet access has nothing to do with your computer hardware and software,If you're a P2P terminator but don't just go crazy to restrict others,You can give everyone two trillion bandwidth,That's fine。

At least at present, there is no good way, this is the disadvantage of community broadband, because it is a shared way, when there are fewer Internet users, the network speed is faster, and during peak hours, there are more Internet users, the network speed is slower.

Shouldn't the fiber be slow? Do you use wireless routing? If so, set a password.

Is your number used by one person or by several people? There's software that controls the speed of the internet and can control the speed of each port of the router – like a terminator. But I haven't used it, because we've always been shared by a few people, which would be inhumane.

Hope it helps.

Home mobile 100m optical fiber, slow into a turtle at night, the problem is here!

First, there are too many people online,,, and second, there is something wrong with your computer.

First of all, the reason for the fiber modification is to increase the maximum band.

BAI wide, enhance anti-interference ability. Because the maximum transmission rate of DU fiber is much higher than that of network cable.

Secondly, under the premise of the same bandwidth, there will be no difference in the speed of optical fiber and network cable. (For example, with the same 4M bandwidth, there will be no big difference whether it is optical fiber or network cable).

Telecom broadband is exclusive to single households, and you can enjoy the corresponding services no matter how much bandwidth you apply for. Won't be affected by other users.

Broadband such as Netcom, China Unicom, and China Mobile belong to multiple households sharing a single optical fiber main line. For example, if the bandwidth reserved for the main line of the optical fiber is 100M, and each user in the community has a 4M bandwidth, then if the number of users does not exceed 25, you can enjoy 4M service. If there are 50 users in the community, then when everyone is online at the same time, your Internet speed will be squeezed by others.

Therefore, after the fiber modification, the maximum number of users that can be accommodated on a main line has been increased. But whether the speed is faster depends on the bandwidth of the main line wide opening, if there is no change from before, then the speed will not change much. Blindly feeling that the optical fiber is fast is not the correct understanding.

The speed of the internet is related to the bandwidth allocated to you by the carrier.

If you are.

1There are many reasons for the slow network speed, if it used to be normal, but it has only slowed down recently, it may be that the computer needs to be cleaned or **, and there are more and more programs. The following methods are recommended:

1.To turn off System Restore, My Computer Properties System Restore turns off System Restore on all disks.

2.Turn off system hibernation, desktop properties screen saver power hibernate and remove the checkmark before initiating system hibernation.

3.Turn off virtual memory, my computer properties advanced performance settings advanced change Select C disk, which is the system disk, select no sub-page, and then set the virtual memory to its disk, and want the disk with more disk space left, such as d, e, f and other disks

4.Clean up hard drive junk and registry junk with Optimizer.

5.Clean up the IE temporary folder, delete the cookies, delete the files.

7.To delete system logs and program logs, My Computer Control Panel Management Tools Computer Management Event Viewer Application, right-click Clear Events, and then Clear System Logs.

8.Clean the system cache: 2000 system is: C: Winnt System32 all files under DLLcache.

XP system is: C: Windows System32 DllCache all files under Clean the system cache. Turn on my computer, Tools. File & Folder option and then put the hidden protected system files.

Note: You can directly run the purgecache command to automatically delete it.

9.Clear the ** station.

10.Worms, which constantly copy junk files and occupy space on the system disk, cause the system to be paralyzed, so it is recommended to kill the virus.

11.Delete the files under C: Windows SoftwareDistribution Download.

It is recommended that the landlord should no longer handle this kind of optical fiber community sharing this kind of business, the whole community is a 10m optical fiber, as few as dozens of households, more than hundreds of households shared, how much do you think the network speed will be left to use it?

It is recommended that the landlord handle an optical fiber to the building, independent broadband with network cable to the home, general Netcom, Unicom, and telecommunications can be, depending on which district the landlord is playing the game;

The kind of broadband you install should be fake, and now regular operators no longer have as low broadband as 10m, and 4m has been eliminated even earlier.

China Telecom, China Unicom, and China Mobile are all promoting large bandwidth of more than 100M, and 200M has been popularized in many areas, and even 300M, 500M, and 1000M have been commercialized.

And in terms of tariffs, the three operators have launched a mobile phone card of 99 yuan per month**, giving 100m 200m broadband. It's much cheaper than your 140 month.

Hope it helps.

If you want to play games, it is recommended to apply for 4M broadband exclusively.

The fiber optic 10m in the community is shared and stuck when there are many people.

You can solve it by changing it to an exclusive one.

As the name suggests, sharing is fiber-to-the-building, and users in the entire building share this 10M bandwidth.

1. This is a problem of the community broadband computer room, and I used to be a community broadband practitioner, so I know more about it.

2. The business hall said that the megabyte of the community has not changed, which means that the total bandwidth of the broadband computer room in the community has not changed, so even if you change your network speed to 2G (network speed = bandwidth), your actual network speed will not reach 2G.

3. In addition, as far as I know, only South Korea and other developed countries can reach the network speed of individual users can reach 1 G, the total network speed of the community broadband computer room can reach 100 G, and the total network speed of the telecommunications bureau of large cities can reach 100,000 G. However, due to the large population and limited capacity of telecommunication infrastructure in China, individual users can only reach 1 G network speed in the community, while the actual Internet speed of individual users is only one G at most. 2G is out of the question.