If you have used the cell 2M fiber broadband please enter the AC speed and stability!!

ADSL is exclusive bandwidth (with ** online Internet so to use modem) dial-up and then go to the Internet, FTTB is the use of fiber broadband mode is shared (no need to dial), ADSL 2M maximum ** rate is 1024KB * 2 8 = 256KB, FTTB because it is a shared bandwidth If you are using ADSL Internet access in this building, then your ** rate must be higher than 2M (I have a classmate who uses FTT B 2M ** rate 800K S), But if there are more people in your community, or everyone is using FTTB to surf the Internet at a point in time, then the **speed will definitely be**, so if you want to be stable, choose ADSL, and if you want **something, choose FTTB, in the final analysis, it depends on how many people in your community are using FTTB.

10Mbps This b is lowercase bps, 1mb b is uppercase is bit 8bps = 1bit so 10mbps divided by 8 equals 1280kbit

Plus the loss on the line. 1MB is normal.

Check whether the DNS settings are correct? IE browser regularly cleans up the web pages that are browsed need domain name resolution, and if you browse the web of operators other than telecommunications, there will be some interconnection problems.

Hello: You check whether the interfaces of all network devices are loose. Whether the indicator light is normal.

It is possible that the computer is poisoned and the computer is running slowly, and you can check and kill the computer.

Use security software to clean your computer of malicious plug-ins, repair registry, junk file cleaner, system optimization.

The slow speed of the web page is mainly due to the limitation of the number of links in the telecommunications room, and when opening the web page, try to open only one page, and close the previous one after opening the new one, which can be alleviated.

In these years, everything can be shared, but the parts in front of the network entrance and objects cannot be shared......

ADSL itself is asymmetrical in the uplink and downlink, and the upload speed is only a few tens of KB, which is very slow.

But you have 10m fiber is cheaper than ADSL, it is unlikely, it is estimated to be 2m.

It is recommended to use 4m fiber.

Deceived huh? 10m 1100 a year, that place? Fiber is definitely better than ADSL.

The main one is much more stable. The two comparisons you mentioned, fiber optics are more than twice as fast as ADSL. But it doesn't feel like that.

You're not talking about the same product, why is the fiber so much lower?

Of course, it is a 10m cell fiber, which is stable and fast.

1. Confirm the specific phenomenon of slow network speed.

Disconnect other computers under the router (wired and wireless clients), make sure that only one computer is connected under the router, and conduct a network speed test on the computer through popular resources such as Thunderbolt and BT software or through the official speed test software of the local operator.

Under normal circumstances, the test speed will be close to the bandwidth value you applied for when the router is not connected, if there is a large gap with the bandwidth value you requested, you can consult the local broadband operator to solve the problem.

If the tested network speed is close to the bandwidth value you requested, it generally means that the network speed is not a problem. After connecting the router, if the test speed is significantly lower than the bandwidth value you requested, please proceed to the next step.

2. Check the settings on your router.

3. Check the settings of your computer.

Check whether the speed test computer has turned on P2P software or its hidden process, the more typical software is PPS, PPTV, BT, Thunderbolt and other **or**software, even if these software does not carry out any **operation, it will continue to upload data, thereby affecting the network speed. This is shown in the figure below.

It is recommended to install the traffic firewall feature of 360 Security Guard to monitor the traffic of each software process, and if you find that such software processes are uploaded at high speed, turn on 360 Traffic Firewall to restrict the traffic of the process or turn off the process through Task Manager.

After confirming that there is no software process to upload at high speed, test the network speed again, if it is close to the requested bandwidth value, it means that the network speed is not a problem