What s the deal with the headphones that don t get into the water but have the sound of water?

The headphones do not enter the water but the sound of water comes out, if it is not your sweat, it should be the ** sound of water in the headphones.

If there is the sound of water, there should still be problems, and if you are sure that there is no water, it is possible that you have accidentally not noticed it.

The headphones don't get water, but there is the sound of water, probably because the TV you're listening to happens to have the sound of running water.

That could be because there is a certain problem with the wiring inside the headphones. So it leads to some noise. It's possible that you're having auditory hallucinations.

The headphones don't get water, but there is water sound, which is the audio coming out of the headphones inside.

If there is a place where toilet paper can't reach, try using a vacuum cleaner to suck the water out of the gap. This method is much safer than using a hair dryer, as long as you don't move your body too much when absorbing water. You can try the help of something else, like rice.

Because of its excellent water absorption and household needs, you can put the rice in a sealed bag with your mobile phone and wait for a few days. Do not use a hair dryer or bake it next to the stove, as the heat from the outside can damage the delicate electronic components inside the phone. The correct way to do this is to wipe it quickly with a clean towel to make sure that water does not run into the charging port, headphone jack, etc.

Hello, it is recommended to find a maintenance master and carry out repairs. If the landlord's mobile phone has water into the mobile phone, it is not recommended that you continue to use the mobile phone in that case. If the top menu bar of your phone shows the logo of the earphone, then your phone has detected that the phone has been plugged into the earphone, and it will automatically cut off the external sound of the hand ruler machine.

But you don't actually have your headphones plugged in, which is why the water is ingress. It is recommended that the landlord check whether there is still moisture in the headphone jack, if the residual moisture is not cleared, it will cause a short circuit in the headphone jack, resulting in the illusion that the mobile phone is detected plugged in the headphones. The landlord can use a cotton swab to try to wipe the earphone hole to see if there is any moisture.

If you are sure that the moisture has been wiped clean after wiping, and there is no moisture generated in the earphone jack, if the phone still shows the status of having earphones on the top. In this case, it is recommended that the landlord send the mobile phone to the after-sales service or mobile phone repair shop to disassemble the phone for processing. It is most likely that the residual moisture inside is causing a short circuit in the headphone jack.

Or the phone fails to detect the sound. If there is still water inside, try not to continue to use it, if you continue to use it, it may burn the other spare group components imitation orange.

After the earphones get into the water, you can listen normally, but there is a sizzling sound, so it is recommended to put them in a dry place to dry for a few days before trying to use them.

Bluetooth headset is the application of Bluetooth technology to hands-free headphones, so that users can avoid the stumbling of annoying wires, and feel comfortable to talk easily in various ways. Since the advent of Bluetooth headsets, it has been a good tool for mobile business people to improve efficiency.

A Bluetooth laptop is a laptop with Bluetooth wireless communication function.

Another important decision for Bluetooth headsets is the transmission distance, which is not related to the Bluetooth version, but depends on the Bluetooth technology powerclass. Most mobile phones and mobile devices use PowerClass2, with a standard transmission distance of 10 meters; The upgraded PowerClass 1 increases the transmission distance to 100 meters, and both versions support the A2DP stereo transmission protocol.

Can be connected to stereo headphones. Generally speaking, the distance between the mobile phone and the Bluetooth headset will not be too far, if there is no big obstacle in the middle, the transmission quality is very good within 7 meters, and there will be a breakpoint if it exceeds 8 meters! More than 10 meters between Bluetooth devices will lose connection.

In such a situation, it must be that the contact components in the earphones are damaged after the water enters the headphone hole, which is a hardware failure, and the mobile phone must be taken to the repair shop for testing, and the plug-in components of the headphones may be replaced before they can be used normally.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

Shut down immediately.

Some experts remind that hair dryers are easy to blow water into the inner part of the phone, and are the "last thing you should do" to "rescue" the phone from water in.

If the phone falls into the water during charging, then the indoor power should be cut off before taking the phone to prevent electric shock accidents. Next, the owner should remove the battery, memory card and SIM card, place the phone on a dry towel or clothing, absorb the moisture on the surface of the phone, and then put the phone in a bag of rice for a day or two. Because rice can effectively absorb water, if you are lucky, your phone may be able to "wake up" when it gets water.

1. Please do not shake or shake the mobile phone frequently after the water enters the mobile phone to avoid the spread of moisture inside the mobile phone.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

The above content reference: People's Daily Online-Don't use a hair dryer when the mobile phone is flooded! An immediate shutdown is the best policy.

Generally speaking, unless the components are burned out, otherwise you can let the water in it dry naturally for a few days, and he will be fine himself.

Cut off the original plug, bake the earphone cable with a lighter, and tear off the outer skin directly after the cord skin is soft. See three lines (4 with microphones) red right channel; Gold negative electrode, blue left channel (some green) [with microphone also has colored headphone core].

Daily maintenance method of headphones:

1. The plug of the earphone is very fragile, and the earphone cannot be used many times because the wire at the plug connection is broken.

2. Don't plug and unplug the plug too much, because excessive wear and tear of the plug will also affect the sound quality.

3. After using the earphones, the storage of the earphone cable starts from the earbuds, reserve a little wire, but do not pull.

If the earphones are in the water, there is no sound, it may be that the water has not dried up, do not use the earphones after entering the water first (to prevent unnecessary damage), the treatment method is as follows:

1.Because of the structure of the earphones, they are afraid of high temperatures and vibrations. The best way is to place it in a naturally ventilated place to dry slowly, and after drying, use a hair dryer to blow through the hole where the headphones are flooded, and the high and low bass will come back.

2.Put the earphones in a sealed bag along with the absorbent tissue and place them in an environment of about forty or fifty degrees. The principle is to create a sauna-like environment, and when the water is steamed, the tissue will absorb the water.

Remember to change your facial tissues regularly. Pay attention to the observation, be sure to grasp the temperature, don't get too high.

Dry it for a few more days, and then use it when it is completely dry; If you fall into dirty water, soak it in liquor and let it dry for a few more days, if it doesn't work, look for a professional headphone repairer.

The headphones are generally hopeless to repair when they get into the water, even if they are dried, the sound quality is not good, be careful in the future, it's a lesson, I've had this experience a few times.

Remove the earphones, see if the inside is due to a short circuit in the water, and wipe them clean.