What s going on with blisters on the inner screen of v8

Teach you how to deal with air bubbles in the inner screen by yourself (also suitable for dust on the screen).

After there are bubbles. It's easy to eliminate, but only if you don't feel sorry for your v8 (it won't be damaged if you do it properly).Perform self-disassembly.

The inner screen protection is glued with double-sided adhesive, and the index fingernail (a strong thin plastic sheet is also made) is placed between the microphone and the inner screen protection screen, and the outer screen is cut. Don't be afraid of damage, the double-sided tape is not very sticky, work hard, wipe the surface of the inner screen and the inner screen protection screen with a glasses cloth after picking it off, wipe it clean and then glue the inner screen protection screen on, and the bubbles can be eliminated! (That's what I did).

After getting into the dust. Some people say that the inner screen is in dust.

This phenomenon does not distinguish between the water machine and the licensed, and will enter the ash), what should I do? Same as above. The reason is that the double-sided tape has cracks (sticks that are not firmly attached), and even if it is not large, fine dust will enter the inner screen.

Supplement: If it is the outer screen into the dust (from the inner screen double-sided glue is not firmly glued) treatment method.

After picking open the inner screen protective screen, 4 small inner plum screws will be exposed, remove it with a special tool, carefully remove the LCD plate of the outer screen, gently wipe it with a glasses cloth, and return to the operation according to the steps just now.

Whether a protective film is pasted, if not, there should be a gap between the inner screen and the shell, which may be a process problem, or the inner screen has been replaced.

It was pressed and the liquid crystal leaked out.

Inconsistent Outer Screen.

When the inner screen comes out of v8, it's basically the screen.。

There are still very few screens.

Is the screen of v8 still small??? It is one inside and the outside. The size of the screen is the same size.。。 It's obvious when you take it apart... The larger the screen, the more power consumption...

In fact, it's enough to use ordinary words,V8The era of the beginning of the big screen is not very popular。 So this phone is still a very good trend machine, but it's a little small now, but even so, this machine is very good, and there is no feeling of backwardness. So it's still worth buying, at present, this machine has been reduced to the bottom price, and the ** of Ouku.com is:

This question should be asked to the homeowner!! It's no use coming here!

A model of a copycat phone:

1.**Exterior shirt code shell.

2.There are a lot of horns (it is said that there are more than 8 horns of the cow, oh my God, I have developed a new function, which is used as an alarm bell).

3.Multi-functional: ultraviolet, infrared or something.

4.Large screen collapse sock screen, multi-screen.

5.Touch the big screen.

6.Airborne optical zoom lens (...)Why don't you get a DSLR that can change the cannon head?

7.The biggest feature is that it is cheap, and it breaks faster

If there is a problem with the system, it can be solved by reflashing the system to the customer service, and the customer service reflashing system is free. Hope it helps!

For unknown reasons, the system is broken somewhere, and it is also possible that the software has lost some functionality due to physical damage.

There should be something wrong with the screen, it is likely that the contact is loose, it is recommended that you go to the repair shop to take a look.

Typical cable problem.

Alternate one. In addition, if it's okay, you can go to the mobile phone forum to learn how to flash your phone.

I** sometimes do that, but it doesn't affect the use. v8 may be too old I'm going to change it.

I've also encountered it after the customer service changed the font! But I'll be fine after flashing it!

Have it? None of mine was found.

Phone Settings Display Settings Backlight Timeout 20 seconds 40 seconds 1 minute.

The phone sets the battery saving mode on and off.

If there is no problem with the above operations, then it is more likely to go to the customer service to detect the line. Is the phone damp and water? Let's check it out.

Set the backlight time in your phone's settings and turn on the battery saving mode. If there is no change, it is recommended that the customer service take a look.,I'm also using v8.,There's a shadow on the screen.,I didn't pay attention when I bought it.,Later, I found out!! More depressed than you .........

If there is no problem with the software settings, then the original that controls the backlight is broken. Only replacement.

Hello,QQ space upgradeV8Version switching problemSelect font size:Large Medium Small V8The new functions are image wall、Weather module、Intimacy、Like and other functions,The avatar will also be larger than before,We will continue to update the new features of V8,Make the interface more beautiful,More convenient to use,Please understand the following update information。

The new version of V8 is about to replace the old version, and you cannot return to the old version after upgrading to the new version. Any software and product has a process of updating and optimization, which is not only responsible for our users, but also to optimize and improve the product functions. If you have better suggestions for product features, you can give feedback to customer service and hope to adopt them.

The inner screen of V8 is a liquid crystal of a ruler.

V8 Main Screen Screen Type Brief: TFT

TFT screen: TFT (thin film transistor) is a kind of active matrix type liquid crystal display (AM-LCD), TFT is set up with a special light tube on the back of the liquid crystal, which can "actively" control each independent pixel on the screen, which is the origin of the so-called active matrix TFT (Active Matrix TFT), which can greatly improve the reaction time, and the reaction time of the general TFT is relatively fast. It is about 80 ms compared to 200 ms for STN. If you want to raise it, there will be flickering.

And because the TFT is an active matrix LCD can be typed high, the arrangement of the liquid crystal is memorable, and it will not return to its original state immediately after the current disappears. TFT also improves the blurring of STN flickering (water ripples), effectively improving the ability to move the picture. Compared with STN, TFT has excellent color saturation, reproduction ability and higher contrast, but the disadvantage is that it consumes more power and the cost is higher.