What s going on with bluetooth headphones? Don t use wire?

BTW-5018 Bluetooth headset • in line with the specifications of the Bluetooth version • The operating frequency band is between to, using FHSS (frequency hopping spread) technology • The operating range in open space is 10 meters • Support Bluetooth HeadsetProfile • Sensitivity -84dBm • Suitable for mobile with built-in Bluetooth standard** • Three-button operation, which can be used for answering, hanging up**, volume adjustment and other functions • Support voice dialing function is suitable for all Bluetooth mobile phones, and can also be connected with other Bluetooth devices, Such as PDA, computer, etc. with voice dialing, redial function. Size: 7cm long talk distance:

Up to about 120 hours.

First, the reason for pairing.

The reason why the Bluetooth headset does not respond is that the Bluetooth headset does not match the mobile phone successfully, and the solution is as follows:

1. Turn on the Bluetooth function of the mobile phone;

3. Turn on the switch of the Bluetooth headset, and the new Bluetooth will automatically enter the matching mode;

5. After the connection is successful, the Bluetooth can be used normally.

Two, there is no power.

The Bluetooth headset does not ring because the Bluetooth headset is out of power, and you need to replenish the power before trying.

It may also be a problem with the source, and you need to replace one, four, hardware failure.

Why don't the bluetooth headphones ring.

The Bluetooth headset does not ring because the power in the Bluetooth headset is insufficient, and it should be put into the charging compartment or plugged in to replenish the power.

Hello Kiss is happy to answer this question for you. Why can't the mobile phone use wired headphones is as follows:1, this situation is likely to be due to the incompatibility of the headset line and the headset line of the mobile phone or the headset itself, resulting in no response.

2. It is best to use the original headphones of the mobile phone, and there will be no problems such as incompatibility, no sound, and bad sound. 3, in the purchase of mobile phone headphones, be sure to carefully see whether this headset supports their own mobile phone use may be because this mobile phone does not have a headphone cable jack, so this mobile phone does not support wired headphones, if you want to use the function of this mobile phone headset, you can achieve it through Bluetooth headsets, as long as you use the Bluetooth function to connect the corresponding Bluetooth headset, you can hear the sound inside the headset, you can also use a Bluetooth device to connect a wired ear high-end machine jack, This will also allow you to connect your wired phone.

The wired earbuds are connected to Bluetooth because the Bluetooth module is configured in the earphones.

One is a wired headset and the other is a wireless Bluetooth headset. Wired headphones are also divided into two kinds according to different interfaces, one is the headset that uses the traditional millimeter interface, which can be used directly connected to the millimeter interface of the hand light machine. The other is a wired headset that makes the bend Xiao use the Apple lightning interface, this kind of headset is not available for all headphones, it needs to be used with a matching mobile phone, but it does not need to be connected to Bluetooth.

Of course, wireless Bluetooth headsets must be connected to Bluetooth before they can be used.

Here's how to connect a wired earphone to Bluetooth:

1. Turn on the Bluetooth of the mobile phone first, and then press and hold the switch of the Bluetooth headset until the headset display light flashes red and blue. At this point, the earbuds have entered the mating state.

2. Tap to pair with Bluetooth headset on your phone, and when it shows that it has been paired, it will be considered successful. The next time you turn it on again, you don't need to pair, and you can directly make it respectful. <>

Summary. Hello! Pro: There are generally the following situations when the headphones have no sound:

1. There is a problem with the settings of the mobile phone.

2. The headphone jack is broken.

3. The headphone jack is loose.

4. The headphones are broken.

02: There is a problem with the phone's settings.

First of all, you need to check whether the phone is set to mute and adjust the sound. Adjust the sound button on the side of the phone to a larger one.

03: The headphone jack is broken.

You can try to change a pair of headphones, if there is still no sound, it proves that there is a problem with the headphone jack of the phone, you can try to use a cotton swab to clean the dust inside, if it doesn't work, you need to go for a phone repair.

04: The headphone jack is loose.

Check the interface, when the earphone has no sound, we check whether the interface between the earphone and the mobile phone is not connected, and adjust the earphone interface.

05: The headphones are broken.

If you change a pair of headphones and there is a sound, it proves that the headphones are broken, and you can buy a new pair from the new.

06: If none of the above methods work, then you can restore the system settings first, or if not, you have to restore the factory settings. Before doing a factory reset, please back up your contacts and important information.

The bluetooth headset has been connected for a long time, and the headset with the wire has no sound.

Hello! Set up and condition it, oh!

Conditioning which piece. Hello! Click in to cancel the pairing, the Bluetooth of the mobile phone is turned off, the earphone Li Yun takes it off and plugs in the charging cable, and long press the earphone for about ten seconds (it must be a long press when charging), which rock beam and then unplug it to turn on the pairing to try the jujube shirt.

Hello! What brand do you have?

Hello! There are generally the following situations when the headphones have no sound: 1. There is a problem with the settings of the mobile phone.

2. The headphone jack is broken. 3. The headphone jack is loose. 4. The headphones are broken.

02: If there is a problem with the settings of the mobile phone, you first need to check whether the mobile phone is set to mute the rolling sound and adjust the sound. Adjust the sound button on the side of the phone to a larger one.

03: If the headphone jack is broken, you can try to change a pair of headphones, if there is still no sound, it proves that the headphone jack of the mobile phone regrets that the problem is slippery, you can try to use a cotton swab to clean up the dust inside, if it is useless, you need to repair the phone. 04：

When the headset jack is loose check the interface, when the headset has no sound, we check whether the interface between the earphone and the mobile phone is not connected, and adjust the earphone jack. 05: If you change a pair of headphones and there is a sound, it proves that the headphones are broken, and you can buy a new pair from a new one.

06: If none of the above methods work, then you can restore the system settings first, or if not, you have to restore the factory settings. Before doing a factory reset, please back up your contacts and important information.

Summary. Hello! The mobile phone cannot be connected to the Bluetooth headset, which may be caused by the following reasons:

1. The Bluetooth headset has not entered pairing mode. Each Bluetooth headset has a function button, press and hold the function button until the indicator flashes red and blue alternately, then let go, and then turn on the phone's Bluetooth to search for pairing. 2. It may be that the mobile phone has not turned on open detection.

Some mobile phones have the option of open detection, which can be turned off, and the Bluetooth device will not be searched after it is turned off. 3. The distance between the mobile phone and the earphone is too far, the effective distance of the Bluetooth connection is within 10 meters, and it must be kept within this distance range during use, and the connection will be temporarily disconnected if it exceeds the range. 4. The Bluetooth headset has been connected to other mobile phones and saved the pairing record.

Press and hold the multi-function button and the volume control+ button at the same time for about 4 seconds, the red light will flash once, clear all pairing records, and then reconnect the phone. 5. The Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the earphone.

Hello! The mobile phone cannot be connected to the Bluetooth headset, which may be caused by the following reasons: 1. The Bluetooth headset does not enter the pairing mode.

Each Blue Sakura stool tooth earphone has a function button, press and hold the function button until the indicator flashes red and blue alternately, then let go, and then turn on the Bluetooth of the mobile phone to search for pairing. 2. It may be that the mobile phone has not turned on open detection. Some mobile phones have the option of open detection, which can be turned off, and the Bluetooth device will not be searched after it is turned off.

3. The distance between the mobile phone and the earphone is too far, the effective distance of the Bluetooth connection is within 10 meters, and it must be kept within this distance range during use, and the connection will be temporarily disconnected if it exceeds the range. 4. The Bluetooth headset has been connected to other mobile phones and saved the pairing record. Press and hold the multi-function button and the volume control+ button at the same time for about 4 seconds, the red light will flash once, clear all pairing records, and then reconnect the phone.

5. The Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the headset.

After you have wired headphones connected. Of course, Bluetooth devices are not good. It's okay to unplug the headphones.

Summary. Hello dear and glad for your question. Depending on your question, there are several reasons for this:

1. The Bluetooth headset has not entered pairing mode; Solution: There will be a function button on the Bluetooth headset, this multi-functional button has a function is to match the device and the Bluetooth headset, when connecting with the mobile phone, you need to press and hold this function key, and at the same time you need to open the Bluetooth function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect. Second, the Bluetooth headset has been connected to other mobile phones, and the pairing record has been saved, so it cannot be connected; Workaround:

In this case, you need to forget the previously saved settings and pair again. Due to the different settings of different Bluetooth headsets, you need to refer to the relevant product manuals for specific operations. 3. The Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the earphone.

This is a hardware problem that consumers themselves cannot solve, so it is recommended to find a headphone seller for return and exchange. Before making a purchase, it is best to refer to the product description and see the Bluetooth technology supported by the phone and Bluetooth headset, or the list of compatible ones.

Hello dear. I'm Mentor Jinx, and I'm happy to serve you Zen Sen. Your problem has been received, and it is being solved for you, and the number of people who have been consulted by the limb is currently decreasing, and you will be able to wait a little longer in about 3 minutes

Hello dear and glad for your question. According to your question, there are the following reasons: 1. The Bluetooth headset has not entered pairing mode; Workaround:

There will be a function on the Bluetooth headset blind button, this multi-functional button has a function is to match the device and the Bluetooth headset, when connected with the mobile phone, you need to press and hold this function key, and at the same time you need to open the Bluetooth function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect. Second, the Bluetooth headset has been connected with other mobile phone covers, and the pairing record is saved, so it cannot be connected; Solution: In this case, you need to forget the previously saved settings and pair again.

Due to the different settings of different Bluetooth headsets, you need to refer to the relevant product manuals for specific operations. 3. The Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the earphone. This is a hardware problem that consumers themselves cannot solve, so it is recommended to find a headphone seller for return and exchange.

Before making a purchase, it is best to refer to the product description and see the Bluetooth technology supported by the phone and Bluetooth headset, or the list of compatible ones.

Wired binaural Bluetooth is stereo sound quality, and the sound quality and sound sense will be better in all aspects, so the Bluetooth headset should be wired.

Bluetooth headset is the application of Bluetooth Songliang technology to hands-free headphones, so that users can avoid the stumbling of annoying wires and talk easily in various ways. Since the advent of Bluetooth headsets, it has been a good tool for mobile business people to improve efficiency.

Bluetooth is a low-cost, large-capacity, short-range wireless communication specification. A Bluetooth laptop is a notebook computer with Bluetooth wireless communication function.