The washing machine water inlet does not enter the water, where is the switch?

The current washing machine water inlet switch is a 220V solenoid valve, the water inlet solenoid valve of your Korean Electric 9·5kg automatic washing machine is at the back of the washing machine, the old washing machine water inlet switch is a mechanical and timer made together, the more old-fashioned is separate, the automatic washing machine is turned on to enter the clothes balance rotation, water intake, washing, dehydration, spinning ......

This is the water inlet solenoid valve that controls the water on and off.

The switch is in the faucet, the faucet control switch is open when the faucet is on, and then if the water does not enter, you can see if there is garbage blocked in the back, and then if the water does not enter, you can pull it out and take a look. It is the place where the water inlet, pull it out to see if there is any garbage. Sometimes it's too much garbage that blocks the water.

First, the inspection method:

Turn on the power switch of the washing machine, let the washing machine be in the state of water inlet work, and press and hold the water inlet valve at the connection between the water inlet pipe of the washing machine and the washing machine with your hand to see if there is a slight vibration. If there is vibration, it means that the water inlet valve of the washing machine is blocked; If there is no vibration, it means that there is damage to the circuit or electronic components.

2. Solution:

1. Blocked water inlet: unplug the power plug of the washing machine, turn off the inlet faucet of the washing machine, unscrew the water inlet pipe of the washing machine, you can see that there is a small filter screen in the water inlet of the water inlet valve, pull out the filter screen with needle-nose pliers or tweezers and clean it, restore the washing machine after the filter is cleaned, open the faucet, plug in the power plug, turn on the power of the washing machine and put it in the working state of the water intake, the water inlet of the washing machine is normal, it means that the water inlet valve of the washing machine is blocked.

2. Damaged water inlet valve: If the water inlet valve mouth blockage is still not flooded after being cleaned up, it proves that the water inlet valve of the washing machine is damaged, which involves the replacement of electrical components.

The washing machine does not enter the water inlet, check whether the faucet is turned on, the washing machine does not have a separate water inlet switch, as long as the washing machine is turned on, the water will automatically enter the water, if the washing machine is turned on and cannot automatically withdraw the water, it means that the water inlet control switch is broken, it is recommended that you replace a switch to return to normal. The switch is connected to the washing machine inlet head, and it can be replaced.

Fully automatic washing machine, as long as the program is set, press the washing machine to automatically enter the water after starting, the water inlet is not manually switched, you can check whether the faucet is turned on, if the faucet is open, it means that the washing machine is faulty.

Reasons why the washing machine does not get water:

1. The filter screen of the inlet valve is blocked: In this case, it is necessary to clean the filter screen of the inlet valve, otherwise the blockage problem will be more serious.

2. Circuit failure or poor line contact: This is mainly manifested in the failure of the water inlet solenoid valve or the poor contact of the plug-in line.

3. There are often problems with the water inlet relay: this problem can be seen from the water inlet relay of the control board very significantly.

Common causes

1. The inlet valve of the washing machine is damaged or the filter screen of the inlet valve is blocked, resulting in the washing machine being unable to enter the water.

2. It is possible that the lid of the washing machine is not properly covered, or there is a problem with the switch, which causes the system of the washing machine to think that the lid is not covered properly, so that no water will enter.

3. It may be that the water pressure in the home is too small, resulting in the water flow not being able to enter the washing machine when using the washing machine.

4. The faucet connected to the washing machine is damaged or not opened, resulting in the washing machine not entering the water.

The maintenance method for the failure of the washing machine without water ingress is as follows:

1. Turn on the power supply, the ears are close to the water inlet valve for "buzzing" sound, if so, check whether the tap water is cut off, close the faucet, screw out the water inlet pipe joint to check whether the filter screen of the water inlet valve is blocked by foreign objects, and if there is a pull out of the filter screen for cleaning. If the problem is not solved, the inlet valve should be replaced, and the valve core of the inlet valve may be stuck and cannot be opened.

2. If the water inlet valve does not have a "buzzing" sound, you should try to replace the computer board at this time, and the problem may be on the computer board.

If you don't have hands-on ability, it is recommended to contact after-sales service or ask a professional for maintenance.

This should be the filter screen of the water inlet mouth is blocked by impurities, close the valve (faucet), open the washing machine to measure the connecting pipe (generally counterclockwise) rotation is disassembly, open the filter screen after cleaning, after installation, boiling water can be, try it.

1. Fully automatic water inlet action, washing or rinsing before water inlet, otherwise the water pressure is insufficient or the water inlet is blocked. 2. Semi-automatic water faucet will enter the faucet, and check the faucet if the water does not enter. 3. The above situation is not to be repaired by service personnel.

The water inlet of the washing machine cannot enter the water, you can check the connector connected to the water inlet of the washing machine, remove it, and clean the filter inside.

The automatic washing machine can not enter the water, which involves the inspection of many parts such as the control motherboard, water level sensor, water inlet solenoid valve, etc., and the cause can only be found out through detection on the premise of understanding the control principle of the smart washing machine.

Check if the inlet valve is stuck or damaged, and replace it with a self-connector.

Summary. Method 1: The general situation is that the valve core of the inlet valve is stuck, and it cannot be reset after being opened after being powered on, resulting in water inlet all the time, in this case, replace the inlet valve first.

Method 2: If the fault is not solved, the problem lies in the water level switch, after a long period of use, the water level switch can stop the water intake, causing the water inlet to stop, at this time the water level switch should be replaced.

Method 3: If the pressure pipe is worn and broken due to a long period of use, or the pressure pipe is in poor contact with the water level switch and the outer barrel air nozzle or disengaged, causing air leakage, it can also lead to water ingress, because the computer board is not under pressure and the water level switch does not act and is misunderstood as the water level is not more than water ingress, at this time, the pressure pipe should be checked for wear and whether there is poor contact or disconnection between the two joints.

Method 4: Due to the use of a long time, there is a foreign object blocking the air valve mouth, resulting in the pressure can not be transmitted to the pressure switch, at this time the big nut should be unscrewed, and then take out the inner barrel to take out the foreign body blocking the air valve.

Method 5: If everything doesn't work, try replacing the computer board, because all actions are controlled by the computer board.

The washing machine inlet does not turn off the water.

Method 1: The general situation is that the valve core of the inlet valve is stuck, and it cannot be reset after being opened after being powered on, resulting in water inlet all the time, in this case, replace the inlet valve first. Method 2:

If the fault is not solved, the problem lies in the water level switch, after a long period of use, the water level switch can stop the water intake, causing the water level switch to be more than small, and the water level switch should be replaced. Method 3: If the pressure pipe is worn and broken due to a long period of use, or the pressure pipe is in poor contact with the water level switch and the outer barrel air nozzle or disengaged, causing air leakage, it can also lead to water ingress, because the computer board is not under pressure and the water level switch does not act and is misunderstood as the water level is not more than water ingress, at this time, the pressure pipe should be checked for wear and whether there is poor contact or disconnection between the two joints.

Method 4: Due to the use of a long time, there is a foreign body blocking the mouth of the air valve, and the pressure cannot be transmitted to the pressure switch, at this time, the big nut should be unscrewed, and then take out the inner barrel, and take out the foreign body blocking the air valve carefully. Method 5:

If all else fails, try replacing the computer board, because all the action is controlled by the computer board.

Hope I can help you<>

Have a great day.

Reason: It may be that the faucet of the water inlet interface is not opened, and it can be turned on; It may be because the lid of the washing machine is not properly covered, which is not a problem with the washing machine, but because the washing machine is not used normally, but such cases generally rarely exist; If the inlet valve is faulty, check the solenoid valve to see if it is bad, if so, it should be repaired by professional maintenance personnel as soon as possible. Additional Information:

Washing machine maintenance method: do not place the washing machine in a too humid place when placing it, so that it is easy to make the computer board in the washing machine damp, try to place the washing machine in a cool and ventilated place. When doing laundry, it is best to remove the contents of the laundry and close the zipper of the garment at the same time to prevent damage to the laundry trough.

When the washing machine is running, it is best not to overload the washing machine, as it is easy to make the washing machine abnormal if it is too long. Regularly check that the washing machine is placed very horizontally, if the washing machine is tilted, it is easy to cause the phenomenon of buckets during washing, and the noise of the washing machine will be very loud. After the washing machine is used, it should be kept dry as much as possible, and at the same time, it can also be idled to prevent the growth of mold.

When the washing machine is not used for a long time, the power plug of the washing machine should be removed in time.

Generally, it is because the filter screen of the inlet valve is blocked, the water inlet solenoid valve is faulty or the coil contact is poor, and the water inlet relay of the computer board is faulty. Once the problem is found, the problem can be solved by unblocking the blockage and replacing the coil and corresponding components.

Solution: 1. Blockage of the filter screen of the water inlet valve: detect whether the water inlet pipe and its filter screen of the washing machine contain foreign substances, if there are foreign objects in the water inlet pipe, you can use soda and vinegar to dredge, and then clean the filter screen of the water inlet valve.

2. Water inlet valve failure: first turn on the power supply, if the water inlet valve does not have a "buzz" sound, it means that it is not working, it may be that the water inlet valve wire is loose or broken, you can open the panel to see whether the water inlet valve coil is rusty or whether it is short-circuited, if there is a replacement coil; If there is a "buzzing" sound, check whether the tap water is cut off and ensure that the water is continuous.

3. Water inlet relay failure: If there is no problem with the water inlet source, the water inlet pipeline is unobstructed, and the water inlet valve is working normally, then it is considered that the water inlet relay is faulty, and you can find professional maintenance personnel to come to repair.

Note: There are many problems that the washing machine does not enter the water, you can first troubleshoot the simple fault, you can take the old demolition method to determine the approximate problem, if the washing machine is still in the warranty period, it is recommended to directly let the after-sales maintenance.

The reasons why the water inlet of the washing machine does not enter the water include the washing machine cover is not properly covered, the water inlet solenoid valve is faulty, the water level pressure switch is damaged, the water level sensor is faulty, and the water inlet pipeline is blocked.

1. The washing machine cover is not covered: The washing machine does not enter the water may be because the washing machine cover is not covered properly, which is not the quality of the washing machine itself. Close the lid of the washing machine and you're done.

2. Water inlet solenoid valve failure: If there is a water inlet solenoid valve failure, then the water will not be able to flow into the washing machine, and the solenoid valve will fail in the case of aging, damage or overheating of parts. At this time, it is necessary to check the resistance of the solenoid valve, if the resistance value is very large, it means that the inlet valve coil has been burned out, and it must be replaced with a new one.

3. The water level pressure switch is damaged: at this time, you can blow air into it to increase the pressure to solve, if this method can not solve the problem, you need to replace a water level pressure switch.

4. Water level sensor failure: Regularly check and maintain the water level sensor to avoid letting it be stained with oil, dust and other substances so as not to affect its normal use.

5. Blockage of water inlet pipeline: This is one of the common reasons why the washing machine does not enter the water, laughing belt in a period of time, a large amount of sediment and dirt may gather in the pipeline, which will prevent water ingress, just clean it or replace the filter screen.

Summary. Hello dear! The washing machine water inlet does not enter the water because the water inlet solenoid valve is broken.

Hello dear! The washing machine water inlet does not enter the water because the water inlet solenoid valve is broken.

There are three reasons why the washing machine does not enter the water: 1. The water inlet valve filter is blocked. 2. The water inlet solenoid valve is faulty or the plug-in line is not in good contact. 3. The water inlet relay on the control board is faulty.

There are generally three reasons why the washing machine does not enter the water: one is the reason for the faucet. If the washing machine suddenly does not enter the water, you must first check whether the faucet is open, or whether there is any problem with the faucet and the water does not come out.

The second is the problem of water pressure. Once you've ruled out the faucet problem, it's time to see if the water pressure is enough. It is not to turn on the faucet to get out the water, but also to have a certain amount of pressure.

The water inlet of a fully automatic washing machine is generally above the fuselage, and some homes have a faucet connected to the inlet of the washing machine located at a low place, and if the water pressure is too low, it is impossible for the water to flow into the washing machine. The third is the failure of the washing machine itself. The failure of the washing machine itself also includes three kinds, one is that the filter screen in the inlet valve is blocked by impurities, causing the water flow to be unable to pass, at this time, you only need to clean the filter screen and dispose of the dirt; Second, the water inlet solenoid valve may be stuffy and sensitive and malfunction, or the plug-in line is not in good contact, and the water inlet solenoid valve needs to be replaced; The third is that the water inlet in the control panel is faulty, and the water inlet needs to be replaced with the same antlet.