What should I do if I forget the password of Hikvision monitoring system?

On the official website of Hikvision**Device Network Search Tool "SADP", Service Support--**--Tool Software--IP Camera Configuration Management Software,**After selecting the required type of device for search tool installation.

Make sure that the computer and the device you need to reset the password are on the same LAN, and note that the IP address of the computer and the device must be in the same network segment.

Hikvision has now launched the function of resetting the password on WeChat***, pay attention to WeChat*** "Hikvision Customer Service", click "Intimate Service", "Password Reset", and select "SADP Scan Recovery". Scan the *** on the SADP search software, and when a serial number combining numbers and letters appears, enter the number into the box of "Step 2", "Enter Manually", and reset the password.

If you still can't reset the password according to the above steps or prompt "This model does not allow self-service recovery, please contact the branch for processing" and other abnormal information, please review the precautions in "Please select a password recovery method" to see if the camera belongs to the scope of contacting the branch for processing. You can directly call Hikvision's technical support**Consulting branch**, or you can check Hikvision's after-sales service station** online.

Select "Export File" on the SADP search software, send this file to the after-sales service of the branch, and then enter the key information provided by the party into the box of "Step 2" and "Manual Entry" to reset the password. Note: This operation prompts that the password recovery failed, please power off the camera, then search again, export the file, obtain the key information, and repeat the above operations.

Reset the password of the DVR.

If it cannot be recovered:

1. Restart the device and try again.

2. If the serial number is entered manually, check whether the serial number is entered correctly;

3. Check whether the serial number or security code is entered correctly, and be case-sensitive;

4. Contact technical support.

Please use Hikvision's [Device Network Search (SADP)], you can search for the keyword [Device Network Search] to find the first official**, please use a switch to connect the computer and the DVR in a LAN, install the [Device Network Search] software on the computer, search for this DVR, according to the [serial number] of the DVR, you can recover the default password, I wish you to get it as soon as possible.

I forgot my monitoring password.

Find Hikvision, they will guide you through the operation.

1. First of all, use the video management software to log in to the system of the video recorder.

2. Enter the management interface of the recorder and click the system configuration button of the recorder.

3. In the configuration interface of the video recorder, select the remote access of the video recorder to manage the configuration of the video recorder.

4. Then open the interface of remote configuration of video recording.

5. Click the user management of the recorder to see how many users the recorder has.

6. If the password of an ordinary user is forgotten, it can be modified through the administrator account.

7. Find the user who forgot the password, click the modify button to enter the password change Lu search interface, and change the password according to the system requirements.

What should I do if I forget the Hikvision camera password?

Hikvision cameras are smart security surveillance devices that are widely used in home and commercial applications. However, sometimes we forget the password of the Hikvision camera, which brings us great trouble. Here are some ways to reset your password to help you quickly regain control of your device.

Method 1: Destroy the default password of the enabled device.

The default login of Hikvision camera is admin, and the password is 12345. If you've never changed your password, you can try logging in with your default password. If you've already changed your password, try the methods below.

Method 2: Obtain the reset password by email.

After logging in successfully, you can enter the device management interface and select the camera for which you need to reset the password. Then, click on the "Reset Password" button and enter your email address. A link to reset your password will be sent to your email.

Open the email in your mailbox and click on the password reset link to enter the password reset page. On that page, you will need to enter your new password twice to confirm that it is correct. Then, save the settings to successfully reset your password.

Method 3: Factory reset via device.

If you are unable to do a password reset through the above methods, then you can consider factory resetting your device. This method can erase the current settings of all devices, including passwords and other configurations.

The way to do a factory reset is to press and hold the reset button on your device until the device's indicator starts flashing (usually takes about 15 seconds). Then, you need to follow the steps on the device manual to reset the device parameters. Please note that this method will delete all files and data from your device, so use it with caution.

In short, when you forget your Hikvision camera password, you can try to log in with the default password, reset it with the password recovery function, or restore the device to factory settings. Hopefully, the above methods can help you solve the problem of password reset.

Tools Raw Materials:

Hikvision camera, operating software: Hikvision camera.

1. First of all, we need to ensure that the computer can enter the camera system, that is, the computer needs to be in the same network as the camera, set up the IP, or use the network cable to connect, this is the operation of this step, is it very simple.

2. We open the browser, enter the address of the camera to enter, you can view your own manual, enter the login state, in order to facilitate access to the monitoring, set up a shortcut, and follow to learn together is not a little pressure.

3. When we enter the address of the camera, we only need to enter the state of login, and then we enter the password, enter the monitoring, and the last step of operation, we must keep up with the pace.

4. After entering, we enter the monitoring interface, we are in the monitoring preview interface, click on the configuration on the upper side, enter the interface of camera configuration, the system will prompt you whether to confirm the recovery, we click OK to restore the factory settings.

We usually set the password of various devices to protect the security of the device, the password is set more or for a long time, the password may be forgotten about a certain device, just like the monitoring password, usually not much, so the password of the monitor forgets and wants to remove the original password, and then re-set, how should I operate?

First, turn off the main unit and cut off the power input. You should remove the cover screws, open the case cover, and then find the J4 pin next to the stand-alone piece on the front panel, which should be marked with the words Password Clear or Password Rerest. Then find the jumper block, use the jumper block to move the leg of the J4 pin to close to the resistor R5, set it to a short-circuit state.

Connect the power input of the host, turn on the power of the host, and start the host. At this time, you will hear the buzzer on the front panel beep, which means that the password has been cleared.

Then turn off the host again, cut off the power input of the host, unplug the short-circuit block, move the leg of the J4 pin to close to the resistance R5 again, set it to the open circuit state, improve the cover, and the password is cleared.

It is recommended that you set the passwords of all devices in your life to be familiar and easy to remember, so that you can avoid forgetting, or write down the passwords and put them in a hidden place.

Hello, I'm glad to answer for you: If you forgot the password of the Hikvision monitor, you can not follow the steps below to reset:1

Open the Hikvision monitoring software on the computer, find the monitor device in the device list, right-click and select "Device Information". 2.After entering the device information interface, find the "Network Configuration" tab, and record the IP address and subnet mask of the monitor.

3.Manually set the IP address of the computer and the monitor in the same network segment, and ensure that the computer and the monitor can communicate with each other. 4.

Open the computer browser, enter the IP address of the monitor, and enter the login interface of the monitor. 5.On the login screen, press and hold the "Reset" button on the back of the monitor and wait for 1-2 seconds to release it, at which point the monitor will restart.

6.After the monitor is restarted, enter the login page again and use the default user's name and password (admin admin) to log in. 7.

After successful login, change the password immediately to ensure the security of the monitoring machine.