How to set boot boot to U disk, how to set boot U disk boot?

BIOS settings USB flash drive boot method:

First of all, you need to make a USB flash drive into a USB boot disk, connect it to the computer, and restart the computer. Different computers have different shortcuts to enter the BIOS, look at the specific brand, and then do it yourself, generally F2, F8, F10 or Enter.

Enter the startup item selection interface, select USB flash drive to start, and press F10 to save the settings, as shown in the following figure:

Then the U boot main menu appears, so that the U disk boot is completed, as shown in the following figure:

How to boot up and set up U disk to start Hello dear, method 1: shortcut key to set U disk start This is the most common and easiest way, press the startup shortcut key when the computer is turned on to open the startup menu, and select the U disk to start in the startup menu. Because there are many types of computers or motherboards, the keys are also different.

Method 2: BIOS set U disk as the first boot item This method is more troublesome than the first one, first you need to enter the BIOS, the entry method is the same as the above, you need to press the shortcut key when booting, different motherboards have different keys to enter the BIOS. After entering the BIOS, use the arrow key and enter key to operate, under the boot menu (sometimes in other menus such as security), change Secure Boot to Disabled (means disabling secure boot), press F10 to save and exit after the setting is completed, and restart the computer will enter the U disk PE system.

The operation is different according to the BIOS classification:

one, AMI BIOS, or Phoenix BIOS General Settings

1. Take Lenovo models as an example, press Del or F1 to enter the BIOS during startup, switch to the boot interface, select 1st boot device to enter, pop up the options dialog box, and select Hard Drive Enter to confirm.

2. Then select Hard Disk Drives Enter to enter the settings, select 1st Drive Enter, select SATA hard disk item, which means that the hard disk is set as the first boot item, press F10 Enter to save.

2. Award BIOS settings

1. When starting the computer, press del vertically to enter this interface, select Advanced BIOS Features, and press enter;

2. Select Hard Disk Boot Priority and press Enter to enter the settings.

3. WDC WD1600AAJS This item represents the hard disk, Tongfeng Lu patted the page up or + sign to move to the first position, and at the same time press and hold the shift and = two keys to +, and finally press F10 Enter to save.