How to make a parrot breeding box, how to pack the breeding box of a parrot cage?

How to make a parrot breeding box:

First use cardboard, A3 size, cut 6 sheets, 2 sheets of 14x8, 2 sheets of 8x11, 2 sheets of 11x14 (centimeter units) on the left side of one of the 14x8 to cut a 6x6 (cm) square, 1 cm from the bottom (to prevent the nest from falling), and then glue it into a box, the outer layer of cladding blow molding paper, open a hole in the same position, (let the parrot enter), make some decoration in the cladding paper, glue it with transparent glue (to prevent it from getting dirty), the hole is still left, and the work is completed.

In addition, pay attention to pad some soft fine wood chips, sawdust, fine grass, etc. Don't paint and don't hurt the parrot with small wooden punctures.

1. First use cardboard, A3 size, cut 6 sheets, 2 sheets of 14x8, 2 sheets of 8x11, 2 sheets of 11x14 (cm) on the left side of one of the 14x8 to cut a 6x6 (cm) square, 1 cm from the bottom (to prevent the things from falling off), and glue them into a box.

2. The outer layer of cladding blow molding paper, open a hole in the same position, (otherwise how to get in), make some decoration in the cladding cardboard, glue it with transparent glue (to prevent it from getting dirty), keep the hole as it is, and the work is done!

It is generally made of pine planks.

If you really want to make it yourself and don't know the style or size of your parrot that fits into the breeding box, there are sizes on the webpage of the breeding box that sells them.

Agreed, it's best to buy on **, my family's is. It is recommended to buy two boxes, like me, look at the picture.

I made it in a regular cardboard box.

8 Get straight to the point, see the topic. Let's briefly talk about the questions that the questioner is wondering about, I hope it will be helpful to you.

How to install the breeding box of the parrot cage.

There are two types of cages for parrots, one is a viewing cage and the other is a breeding cage. If you don't know, ask the seller when you buy it, if you want to use an ornamental cage at home and want to put a breeding box, then you have to cut it. The parrot's breeding cage has a symmetrical flap on the left and right sides, and this door that can be opened and closed is designed to install the breeding box, and can be installed on the left or right side according to the position of the cage at home.

The breeding tank is also divided into two types, one is the horizontal nest and the other is the vertical nest. Horizontal nests are generally used for budgies, but budgies can also be used for breeding with vertical nests. Before the installation of the vertical nest, it is necessary to consider the direction of opening the door, if it is installed in reverse, it will bring unnecessary trouble to the future canning and cleaning.

The breeding box depends on whether you are horizontal or vertical, most of the breeding boxes are installed on the side of the cage, according to the size of the import and export of the breeding box, cut the cage wire, and fix the breeding box with screws.

You can pretend to be anything...When buying, pay attention to whether the entrance and exit door is on the left or right...If you buy it, take it back, and put it on your parrot, you'll get in.

Summary. Hello, I've seen your question Ha Now I'm manually replying to the content for you, but it takes a little time, please be patient for a while, thank you, thank you.

How big is a peony parrot breeding box?

Hello, I've seen your question Ha Now I'm manually replying to the content for you, but it takes a little time, please be patient for a while, thank you, thank you.

Hello dear, the peony parrot breeding box needs a 70 cm 60 cm 50 cm size breeding cage, 20 cm 16 cm 16 cm size artificial nest box, the front of the box opens a diameter of 5 cm round entrance, under the mouth set up a wooden platform, for birds to step on when entering and exiting. Hope it helps you, <>

Is there anything else you can help you with?

Hope the above is helpful <> you

If you are satisfied with me, please give a like<> Your praise is the infinite motivation for me to answer the question <>

Cotton, soft branches, leaves, etc., which are comfortable to the touch and can keep warm.

1.Budgie breeding crates on the market.

Generally, the plastic houses sold in the market are only for ornamentation, for parrots to rest and use, if they are used for breeding, they must not keep warm, and the eggs may also fall out. So it's best for owners to buy breeding boxes for tiger skins. Budgie breeding boxes are generally bought online, and some are made of pine (usually fir).

It is sturdy and not easy to be gnawed by tiger skin, and it is durable!

1) Nowadays, many customers are asking more and more to make pine nest boxes, mainly because the hardness of pine is higher than that of fir. It's not so easy to bite and it's practical.

2) The nuts of pine trees are eaten by many animals and birds, and the pine leaves are also eaten by many insects. Therefore, pine wood is absolutely environmentally friendly and pollution-free.

3) Wild birds build many nests on pine trees, but rarely on fir trees, so pine nest boxes are more suitable for birds to breed the next generation.

2.Homemade budgie breeding crates.

The materials for the homemade budgie breeding box: cardboard boxes, cotton, soft branches, leaves, etc., which are comfortable to the touch and can be kept warm. If there is a wood chipping, it is better to put it on it.

The breeding box can be made horizontally or vertically. The vertical type will cause the mother bird to climb up and down during the egg-laying period and lose physical strength, while the horizontal type does not have this disadvantage.

Method: 1) Use soft branches to make a small nest (a small box is also fine, as long as it is built with branches); 2) pad two layers of cotton; 3) a piece of cloth; 4) Put a few leaves; 5) Pounce on the wood chipping.

Generally, the breeding box of budgies should be based on a wooden box of 32cm*16cm*16cm (length * width * height) or 16cm * 16cm * 32cm (length * width * height), and the diameter of the nest mouth is generally about 5 6 cm if you make it yourself. If you do it yourself, you should remember to make a trap door, you can check the condition of the eggs at any time, parrots generally have to pad sawdust when breeding, and the mother bird may peck the sawdust in its mouth or throw the sawdust out of the box or pile it on the side of the breeding box, these are normal phenomena. While the presence or absence of a partition in the middle makes no difference to the bird's hatchability, it is better to have a partition in the middle.

Reason: aIt can create the most suitable environment for the breeding of the mother bird and bring a sense of security to the mother bird; b.

The partition in the middle prevents the birds from falling out of the nest box during the young bird stage. The key is the litter, now it is generally put sawdust, which is the kind sold in the pet market for hamsters, which is cheap and can be used for a long time. When spreading, it is best to be thicker but not very loose (scattered, the parrot will bottom out after grabbing twice, which will affect the hatching effect:

One is to get out, the second is not warm, and the third is that birds are easy to be lame).

<> the size of the breeding box of the general parrot is 32cm long, 16cm wide, 16cm high, and the diameter of the nest mouth is generally about 5-6 cm. A wooden board can be placed horizontally inside the box to divide the bird box into two bedrooms, which can create a suitable environment for the mother bird to breed, and also prevent the baby bird from falling out of the bird box when it is young. An equally round hole is made in the partition, about 4 cm in diameter, to facilitate the entry and exit of birds.

Parrot breeding box production steps:

The size of the parrot's breeding box.

Length 35cm, width 25cm, height 25cm

There are generally two styles of breeding boxes, which are horizontal nest boxes and vertical nest boxes.

The advantage of horizontal style is that it is easy for parrots to get in and out, but naughty parrots will easily get sawdust and eggs out, and hatched chicks are easy to slot.

The vertical type can make it difficult to climb out and fall to death, and it is easier to clean up and sanitize, but the female bird will be more tired when climbing up and down, because the parrot is inconvenient to enter and exit and accidentally step on the chicks.

Bedding: Start with a small nest with soft twigs (a small box will do, as long as you build it up with branches), put two layers of cotton and a cloth on top, then put a few leaves, and finally spread wood chips or shavings. Wood chips or shavings can be 2-3 cm thick, and sometimes the parrot will take out these litters when they are bored, which is normal and can only be added to the nest box.

Partition: The middle partition is also important, and some people think that it is not necessary and will reduce the flexibility of the female parrot. The importance of the partition is that it creates the most suitable environment for the mother bird to breed and effectively prevents the young birds from falling out of the nest box during the young bird stage.

The central partition should be placed horizontally on the inside of the box, dividing the bird box into two bedrooms. An equally round hole is made in the partition, about 4 cm in diameter, to facilitate the entry and exit of birds.

If time and conditions permit, it is recommended that you make your own breeding box, so that you can not only create a unique nest box on a whim, but also create a suitable nest box according to the habits of the female parrot.

The tutorial for making a parrot breeding box is as follows:

1. Measure and cut down two pieces of wood to make the roof. Prepare two centimeter-thick boards, which can be pine, fir or ready-made plywood or plywood. Use a tape measure or ruler to measure two boards 15 cm wide, 20 cm long on one side and 25 cm long on the other.

2. Dig a round hole with a diameter of one centimeter in the front plank. Attach the drill bit to the drill and mark 1 3 of the front board with a pencil. Use a drill bit to drill a centimeter-diameter hole in the front to allow the birds to move in and out of the box freely.

3. Drill 5 small holes in the bottom plank. Using the same drill bit, make the 5 small holes evenly spaced over the bottom plank. The size of the borehole is about 1-2 mm, allowing water and debris to drain better out of the nest.

4. Fix the side board with nails and the back plank. Start by aligning the two side panels so that they are flush with the bottom plank and at a 90-degree angle. Two nails on each side are used to connect the side panels to the back plank, leaving about 50 mm (cm) of space above the back plank.

5. Install the bottom plank on the back plank and fix it. Align the bottom plank with the back plank. Use 4 nails to nail the bottom plank and back plank together as well as the side plank.

6. Install the front plank. Place the front plank A on the side panels so that the entrance and exit are close to the top of the box. The front plank is fastened to the side plank with 3 nails on each side, and the bottom plank is fastened with 2 nails.

7. Use leather or leather material as a hinge to connect the top plank and the back plank. Prepare a strip of rubber or géchard material 15 cm wide and 12 cm long. Use 2 nails to fix the top of the leather on top of the back plank, and 2 more nails to fix the top of the nest on the other side of the leather.

8. Free choice to decorate the bird's nest. If you want to make your nest more beautiful, you can use non-toxic water-based paints to doodle or color the wooden planks on the outside of your nest. After painting, wait for the paint on the nest to dry.