The branch of the spring flower was accidentally broken, how to save it.

It is possible to insert the severed limb into the soil for cultivation.

The branches of the spring flower are small and supple, the root system is developed, the germination force is strong, the pruning resistance is resistant, the golden green calyx, the gorgeous and cute, is a good bonsai material.

The materials used to make spring flower bonsai are mainly cultivated artificially and dug in the field to dig stout old piles, because of their resistance to pruning and strong germination ability. The method of heavy pruning can be used to cut off the apical buds and cultivate a certain crown after the plant grows to about a meter or a certain design requirement. Or through a certain amount of plastic pruning, remove the basal buds of the roots at any time to promote their multi-branch flowering.

Field excavation should focus on root preservation, try to maintain a complete root system, remove the disabled and dead root system, straighten out the root system, plant it deep in a pot, and gradually implement root lifting. The method of extracting roots is to fill the lower half of the pot with nutrient soil, and then fill the upper half with fine sandy soil.

When cultivating, all the roots should be buried in the pot, then compacted, watered thoroughly, and carefully managed.

After a stage of cultivation, the root system develops normally, and fibrous roots grow in the culture soil, which have deep roots and lush leaves. At this time, the fine sand can be gradually removed so that the upper roots are slowly exposed. After a certain period of cultivation, the exposed roots have gradually aged and the lateral roots are relatively thick, so the flowers and trees can be moved to shallow pots.

When transplanting, the root system should be fully protected, and the original culture soil should be brought. In this way, you can gradually cultivate a simple and vigorous spring flower bonsai with hanging roots and open claws.

Branches should be re-pruned, and all but the selected retained branches should be removed. The retained branches should also be shortened, and according to the growth characteristics of the spring flowers, they can be cultivated into cliff-type and semi-cliff-type bonsai.

Some old pile bonsai branches are old and bent, the base is overhanging and the claws are exposed, the long strips are draped, the golden and green calyx, the spring is reported early, and it has a unique charm. The spring branches can also be pierced to form round, semicircular, fan-shaped, etc. Sometimes, in order to make the spring branches grow high, you can insert bamboo poles next to them, and tie short strips to the bamboo poles to support them to grow high.

At the same time, it is necessary to remove the bud at the base at any time. When it grows to a certain height, it is then removed from the top of the trunk so that a drooping arched canopy can be formed.

Stick it in the soil right away! This kind of easy to live! You can also break off the leaves and insert them in the soil, and they will take root and sprout on their own!

This is called longevity flowers, and you will live when you plug it in.

Is this spring? Well, I believe it.

The spring flowers you showed weren't all dead.

Suggestion: Soak their roots in water, not the above-ground parts, but spray some water. Observe!

After a while, cut off the dry parts and replant the plants into pots.

The branches of the spring flower are dry, and the dried branches need to be cut off in time, which is conducive to the aesthetics of the plant, and can also avoid excess nutrient consumption.

1. Prune

The branches of the spring flowers are dry, it is necessary to cut off the dried branches in time, which is conducive to the aesthetics of the plant, and can also avoid excess nutrient consumption, if not pruned, these dry branches are also easy to breed diseases and pests, and some weak branches and dense branches can also be cut off when pruning.

2. Too little watering

Spring flowers like to grow in a humid environment, if the maintenance process is too little watering, its branches are easy to dry up, so when maintaining spring flowers, you need to water them frequently, keep the soil slightly moist is the most suitable, but pay attention to avoid soil water accumulation, otherwise it is easy to rot roots.

3. The light is too strong

The branches of the spring flowers are dry, and it may be caused by too strong light, and it can not be exposed to strong light for a long time, so when maintaining the spring flowers in summer, it is also necessary to take appropriate shading measures for them, at this time, it is best to maintain them in a semi-shady environment, so that it has the right amount of scattered light to irradiate the best.

4. The temperature is uncomfortable

It likes to grow in a warm environment, if the temperature is too high or too low, its branches are easy to dry, so in summer and winter, it is necessary to take temperature control measures to avoid growing in an uncomfortable temperature environment.

The drying of the branches of the spring flowers is most likely caused by gray mold, which is infected with the germ and gradually withered. Watering too much or too little can also cause its branches to dry out. Although it likes sunlight, it is not tolerant of strong light, and if it is exposed to strong light, it will also dry up its branches.

1. Botrytis cinerea

The branches of the spring flower appear to dry up, it is likely to be caused by gray mold, after the plant is infected with the fungus, there will be yellowing and death, at this time its branches will gradually dry up, so the daily maintenance of the spring flower, pay attention to ventilation, but also to avoid it in the damp heat and unventilated environment for a long time.

2. Improper watering

The branches of the spring flower appear to dry up, and it may be caused by improper watering, its growth needs sufficient water, if it is not watered for a long time, it will lose water and dry up, but too much watering, its root system will rot, so that it can not absorb nutrients and water, so there will also be the phenomenon of dry branches.

3. Improper lighting

Although the spring flower is a sun-loving plant, but it can not be exposed to strong light for a long time, if it is exposed to strong light for a long time in summer, it is easy to lose water and dry up, so it may be caused by improper light, so when maintaining the spring flower in summer, it should be properly shaded from the strong light.

If the spring flowers are wilting, they need to improve the environment, preferably in a sunny and warm environment, and the soil needs to be well drained. It will also wilt after the disease, and at this time, the withered person should use special drugs to **. It is normal for it to wither after autumn, and it should be pruned properly at this time.

1. Improve the environment

The phenomenon of wilting in spring flowers may be caused by the unsuitable maintenance environment, so at this time we need to improve the environment for it, it is best to maintain it in a sunny and warm environment, but not let it be exposed to the sun, but also pay attention to it is not resistant to waterlogging, so the soil needs to ensure good drainage.

2. Drugs**

At this time, we need to cut off the branches and leaves that have been invaded by the disease, and then use special insecticides and fungicides to spray the plants**, and do a good job in water control, temperature control, ventilation and other aspects of management, so that it can recover its vitality.

3. Prune

Spring flower is a deciduous shrub plant, after autumn, it will gradually appear withering, this phenomenon is very normal, farmers do not need to worry too much, after the temperature rises, it can continue to sprout and grow Chihe, but at this time we need to cut off its old branches and weak branches, so that it can better germinate new branches in the coming year.

There are many possibilities for the leaves of spring flowers to dry out:

1.The water is not enough, and the spring is moist, especially in the hot summer, in addition to watering once a day in the morning, it should also be properly watered in the afternoon.

2.If there is no sunlight, just planted or just repotted to welcome spring, maintain for a week, and then place it in a sunny, well-ventilated and humid place for maintenance.

3.The fertilizer is insufficient, and when planting to welcome spring, a few pieces of animal hooves should be placed at the bottom of the pot bowl as base fertilizer. In the spring growth period, it is necessary to apply 1 or 2 times a month to rot thin liquid fertilizer. 7 and August is the differentiation period of spring flower buds, and liquid fertilizer containing more phosphorus should be applied to facilitate the formation of flower buds.

Of course, watering, lack of water will be like this; If you are busy with work and often forget, I will teach you a method: use a deeper pot mat to get some water and put it under the pot where the spring flowers are planted, and of course you will take some time to look at it for a while. Otherwise, the leaves will still fall and die.

Hurry up and water him, and water it evenly, it won't die, and if you don't water, you may die, just like a person who doesn't eat? No, it doesn't.

Water, and then spray the leaves with some water.

Causes and solutions for yellowing and wilting of spring flower leaves:

1. Sudden changes in the environment.

If it is a home potted plant, the yellowing and wilting of the leaves of the spring flowers may be caused by sudden changes in the environment. Although the spring flowers are adaptable, because the environment before buying and the environment after buying back changes greatly, the spring flowers cannot adapt to it for a while, resulting in yellowing of the leaves.

Solution: When buying spring flowers, you should understand its growth at that time, and after the potted plants arrive at home, you should maintain their growth environment, and then slowly change until you adapt to your home.

2. Watering too often.

Spring flowers are afraid of waterlogging. If you water too much, the growth of the plant will slow down, and the newly grown branches and leaves will turn yellow and wilt.

Solution: Before watering, check the dryness and wetness of the soil, and insist on seeing the dryness and wetness. If you are not measured, bask in the sun immediately after watering, or use the soaking pot method to water, which can effectively control the amount of watering.

3. Mosaic virus.

The leaves of the spring flowers are yellow and wilted, in addition to water, fertilizer, soil, diseases and pests also need to be considered. It is known that if the spring flowers suffer from the mosaic virus, dark green spots or yellowing will appear, and the plants will not bloom or even have smaller flowers.

Solution: Remove weeds in time to reduce the source of infection and ensure that the surrounding environment of spring flowers is clean. In severe cases, spray the agent.

4. Lack of nutrients.

The growth of spring flowers needs to be fertilized in a timely manner, otherwise it is difficult for nutrients to extract new branches, which will affect the growth of the plant, resulting in yellowing of leaves.

Solution: Timely fertilization: during the growth period, nitrogen, phosphorus and potassium fertilizers are the mainstay, and top dressing is 2-3 times; When potting, apply foot fertilizer; Before flowering, apply nitrogen fertilizer once; After flowering, prune the branches and leaves in time and top dressing once.

In addition, according to the growth condition of the plant, fertilize reasonably. Water each thin liquid fertilizer to avoid excessive fertilizer damage.

There are two problems, one is not enough water, the second is not exposed to sunlight, and the third is not enough fertilizer.