Why don t I need a password to log in to my computer in safe mode?

If you forget your password, you can change it in the following way: Take the recovery of the local user's "guest" password as an example to illustrate the steps to solve the problem of forgetting the login password

1. Restart the computer, press the F8 key immediately after the boot screen appears, and select "Safe Mode with Command Line".

2. At the end of the running process, the system lists the selection menus of the system superuser "administrator" and the local user "guest", and clicks "administrator" to enter the command line mode.

3. Type the command: "net user guest 123456

add" to force the password of the "guest" user to be changed to "123456". If you want to add a new user here (e.g., username abcdef, password 123456), type "net."

user abcdef 123456 add", after adding it, you can use "net localgroup administrators abcdef

add" command promotes the user to the user of the system administration group administrators and gives it super privileges.

4. Restart the computer, select Normal mode to run, and you can log in to the "guest" user with the changed password "123456".

Permission problems, if the ordinary administrator has set a password super management without it, you can use the password in the security mode.

If the computer only has super management and has a password, then the password should also be used in safe mode.

You don't need a password, just click OK.

Why don't I need a password to log in to my computer in safe mode?How not? Or do you still need it?

Your admin user set the password, right?

Summary. If you forget your password, you can change it in the following way: Take the recovery of the local user's "guest" password as an example to illustrate the steps to solve the problem of forgetting the login password

1. Restart the computer, press the F8 key immediately after the boot screen appears, and select "Safe Mode with Command Line".

2. At the end of the running process, the system lists the selection menus of the system superuser "administrator" and the local user "guest", and clicks "administrator" to enter the command line mode.

Why do you have to enter the password after the computer security mode is started.

If you forget your password, you can modify it in the following way: Take the recovery of the local user's "guest" password as an example to illustrate the steps to solve the forgotten login password: 1. Restart the computer, press the F8 key immediately after the boot screen appears, and select "Safe Mode with Command Line".

2. At the end of the running process, the system lists the selection menus of the system superuser "administrator" and the local user "guest", and clicks "administrator" to enter the command line mode.

3. Type the command: "net user guest 123456 add" to force the password of the "guest" user to be changed to "123456". If you want to add a new user here (e.g

If the user name is abcdef and the password is 123456), type "net user abcdef 123456 add", and then you can run the "net localgroup administrators abcdef add" command to promote the user to the administrators group and give the user super permissions. 4. Restart the computer, select Normal mode to run, and you can log in to the "guest" user with the changed password "123456".

According to this operation.

There is also the easiest way.

You take the coin cell battery off the motherboard, wait a few minutes and put it back on, and the password is gone.

No, this is a computer, not a mobile phone, and the recovery is to reinstall the system.

You click on that debug mode to go in, and show me the screenshot.

Your system is win10.

A boot USB flash drive is required.

before you can clear or reinstall the system.

If you have a system disk at home, put it directly into the optical drive and reinstall the system.

Here are the detailed steps you can take a look at.

Summary. Dear, the computer has set up the security mode after the system is installed, and I don't know how to enter the computer with the password, the solution is as follows: 1. Prepare the U disk or mobile hard disk, use the computer ** U disk boot disk to make software, make the U disk or mobile hard disk into a U disk boot disk, remember to back up the data of the U disk or mobile hard disk before operation, otherwise the data will be cleared, insert the U disk boot disk into the computer, press the hotkey to enter the BIOS to set the U disk boot disk as the first boot when the computer starts, save and restart the computer, and the computer enters the system, press the up and down arrow keys of your keyboard, select Run Windows Login Password Cracking Tool, and press Enter.

2. Press the up and down arrow keys of the keyboard to select Clear Windows Login Password (Change Password), then enter, then enter the number 2, and then enter. After pressing the Enter key, the system will automatically search for the "SAM" file on the disk, press the Enter key to continue, select the serial number of the corresponding administrator user, enter, press the Enter key, and then follow the prompts to select, and then press any key to exit, and restart the computer.

After the computer is installed, the system has set up a security mode, and I don't know how to enter the computer with the password.

Dear, you have set a password and have forgotten it?

Without setting, you can't get in after installing the system.

I don't know the username and I don't know the password.

Dear, the computer has set up the security mode after the system is installed, and I don't know how to enter the computer with the password, the solution is as follows: 1. Prepare the U disk or mobile hard disk, use the computer ** U disk boot disk to make software, make the U disk or mobile hard disk into a U disk boot disk, remember to back up the data of the U disk or mobile hard disk before operation, otherwise the data will be cleared, insert the U disk boot disk into the computer, press the hotkey to enter the BIOS to set the U disk boot disk as the first boot when the computer starts, save and restart the computer, and the computer enters the system, press the up and down arrow keys of your keyboard, select Run Windows Login Password Cracking Tool, and press Enter. 2. Press the up and down arrow keys of the keyboard to select Clear Windows Login Password (Change Password), then enter, then enter the number 2, and then enter.

After pressing the Enter key, the system will automatically search for the "SAM" file on the disk, press the Enter key to continue, select the serial number of the corresponding administrator user, enter, press the Enter key, and then follow the prompts to select, and then press any key to exit, and restart the computer.

Dear, you can try my above method first, and then ask <>me if you don't understand

Summary. Method 1:

1.Enter Safe Mode.

2.to My Computer, Right Click Properties, Advanced, Boot and Fault Management.

3.In the settings, remove the automatic restart check in the system failure.

4.When booting into normal mode, the system will blue screen, look at the blue screen information, see which file is the crash, generally the driver.

5.Remove the driver or delete the drive file as appropriate.

Method 2: 1Close all programs.

Open Run, type msconfig in the Open box, OK.

3.In the System Configuration Utility, "boot.."ini tab. Are you sure.

4.Reboot and you can enter normal mode.

Method 3: It still doesn't work to restore the system or reinstall the system that comes with the system

1.Start Programs Accessories System Tools System Restore.

2.Click on "Restore my computer to an earlier time".

3.Press Next, you will see that the date page has a dark date, that is the restore point, select, click Next to restore.

The computer does not know how to exit the safe mode password.

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Method 1: 1Enter Safe Mode.

2.to My Computer, Right Click Properties, Advanced, Boot and Fault Management. 3.

In the settings, remove the automatic restart check in the system failure. 4.When booting into normal mode, the system will blue screen, look at the blue screen information, see which file is the crash, generally the driver.

5.Remove the driver or delete the drive file as appropriate. Method 2:

1.Close all programs. Open Run, type msconfig in the Open box, OK.

3.In the System Configuration Utility, "boot.."ini tab.

Are you sure. 4.Reboot and you can enter normal mode.

Method 3: It still doesn't work to restore the system or reinstall the system that comes with the system:1

Start Programs Accessories System Tools System Restore. 2.Click on "Restore my computer to an earlier time".

3.Press Next, you will see that the date page has a dark date, that is the restore point, select, click Next to restore.

Summary. Pro, if your computer can't log in normally, you can only log in to safe mode, here are some possible solutions:1

Check your password: Make sure you've entered the correct password for your account, especially in safe mode, where you'll need to enter the correct credentials to log in. 2.

Restart your computer: Try restarting your computer, sometimes a simple restart can fix a temporary sign-in issue. 3.

Perform a system recovery: In safe mode, you can try to perform a system recovery. Open the Control Panel, find the "System & Security" or "System Management" option and select "Restore" or "Restore".

Select an earlier point in time from the available recovery points and follow the on-screen instructions. 4.Disable startup items and services:

The constant pop-up error messages may be caused by a certain startup item or service conflict. In safe mode, you can disable startup items by opening the "Task Manager" (pressing Ctrl + Shift + Esc) and switching to the "Startup" tab. Then select "Hide all Microsoft services" in the "Services" tab to disable the remaining services.

Disable startup items and services one by one, and restart your PC to determine which is causing the sign-in issue. 5.Update System Drivers:

The computer can't log in, you can only log in to safe mode, what should I do?

Pro, if your computer can't log in normally, you can only log in to safe mode, here are some possible solutions:1Check the password:

Make sure that you enter the correct password for your account, especially in safe mode, where you will need to enter the correct credentials to log in. 2.Restart your PC:

Try restarting your computer, sometimes a simple reboot can fix a temporary login issue. 3.Perform a system recovery:

In safe mode, you can try to perform a system recovery. Open the Control Panel, find the "System & Security" or "System Management" option and select "Restore" or "Restore". Select an earlier point in time from the available recovery points and follow the on-screen instructions.

4.Disabling startup items and services: Constant pop-up error messages may be caused by a search for a startup item or service conflict.

In safe mode, you can disable startup items by opening the "Task Manager" (pressing Ctrl + Shift + Esc) and switching to the "Startup" tab. Then select "Hide all Microsoft services" in the "Services" tab to disable the remaining services. Disable startup items and services one by one, and restart your PC to determine which is causing the login issue.

5.Update System Drivers: Try updating your computer's system drivers.

6.Perform System Repair Tool: If the above methods do not solve the problem, you can try to dismantle the rough key and use the repair tool that comes with the operating system, such as the Windows system"System file checking tool"(SFC Scannow) or"Automatic repair tool"(Windows Auto-Repair).