rwpppoe how to turn off the automatic connection

1. Error 619: Unable to connect to the specified server, the port used for this connection is closed.

Problem: Due to an error in the last connection and the short interval between redials, the server is too late to respond to your username and password. Workaround: We recommend that you try again after an interval of one to two minutes.

2. Error 678: Unable to connect to a remote computer.

Problem: Attempts to connect to the server failed. Solution: Please check whether the indoor network connection is normal and whether the NIC light is on? If there is no problem, then we are really sorry, there is a problem with our network, and you can only report for repair.

3. Error 691: Access denied due to an invalid username or password on the domain.

Problem: The other computer is unable to create a dial-up network connection, please check the password and try again. Workaround:

The reason for this error is that the username or password is entered incorrectly. Check the username and password, and note that the English letters in the username are always lowercase, and the upper and lower case of the English letters in the password are different. Note:

If the account is deactivated, the same problem will occur due to account deactivation.

4. Error 650: The computer that is dialing in does not respond to the network request; As well as Error 645: The dial-up network is not connected to the server.

Question: Please check the server settings in the connection properties; Please test the configuration and then reconnect. Workaround: Both of these errors are usually caused by a software failure of the dial-up network adapter, and the solution is to reinstall the dial-up network adapter.

5. Error 680: There is no dial tone.

Problem: This error is usually caused by a faulty line connection. Workaround: The workaround is to check the connection to the ** line of the modem.

6. Error 629: You have been disconnected from the other computer. Please double-click on this connection and try again.

Problem: There are generally two possible causes of this error: one is the problem of modem - the compatibility of modem is not good or there is a hardware failure; The other is caused by the poor quality of the line and the unstable connection. Solution: Replace it.

7. Error 769: Unable to connect to the designated target.

Problem: This is when there is a problem with your computer's network equipment. Workaround:

Open "My Computer" "Control Panel" "Network Connection" to see if the local connection is in the "Disabled" state, if so, just double-click the local connection and see the status changes to "Enabled". If you don't even have a local connection, then your network card is 100% wrong - either it doesn't work well or it is broken. Please contact your computer company, or solve it yourself.

There is a connection in the Internet Options section of the IE tool.

There is an rwpppoe connection in the box below. Just delete it.

rwpppoe connection, add a shortcut to this connection on the desktop, put the dial-up option inside (show progress when connecting) (prompt name. Passwords and certificates, certificates, etc.) (including windows login domain) (hint ** number) The hook in front of these four items is removed, and this desktop shortcut is dragged into the startup item! ok!

Create a new one. BAT.

Rasdial ADSL Account Password Save Start Run.

User configuration. Windows settings.

Login Add Script Add the adsl script to it and it will be automatically dialed when you turn on the phone.

Family ADSL?

If it's a home ADSL, you can directly use the dialer program that comes with Windows, you can also set up automatic dialing, and the setup is simple.

Go to the network neighbor and click View Network Connection, right-click Network Connection - Properties - Options - Uncheck "Prompt name, password and certificate, etc." OK, double-click the network connection, enter your ADSL account password, check "Save password for me", OK, connect to the network, and then create a shortcut to the network connection, put this shortcut into the start-program-startup.

The launch menu is here.

C: Documents and Settings Administrator Start Menu Program Launch.

All you have to do is put in the program or shortcut key you want to boot up. Remember, don't copy.

Landlord,Use the "startup item settings" in the super rabbit,After opening, use "New" "Find the program you want to start (that is, find the program you want to boot up,That is, establish a path for your rwpppoe executor),Then restart,OK,So that you boot it will run by itself。 Hope you can give it a try.

Start—> Connect-> Dial Left-click and drag it inside Startup OK.

You removed your broadband link.

Then build a broadband link.

If the PPPoE protocol is corrupted, repair the PPPoE protocol or reinstall the system.

1.from"Get started"->"Control Panel",->"Network connection"

Here open Broadband Dial-up Internet access, and re-enter your account number and password.

2.Open the Internet Properties, in the "Connections" page, dial-up and virtual private network settings are under the following and there is no :rwpppoe to delete.

Are you using broadband? You enter the password and username correctly, click on the connection, don't set the function in the broadband, you can default to it.

In the Internet Options, look at the connections in the IE device, if there is an RWPPPoE connection, delete it.

Or remove the automatic connection at startup, click Run in the start menu - fill in msconfig enter - open the "System Configurator", select the (startup) tab, remove all the checks about the word rwppoe and restart the computer.

Because there is a virus in your computer.

It is recommended that you kill the virus immediately.

1. First of all, we use Netcom's official client "Broadband My World" to log in to Netcom Broadband with username and password.

The client is in Henan Netcom official ** Yes).

2. Obtain Netcom's internal account.

If you want to log in to Henan Netcom Broadband through XP's built-in login program, it is not possible to use your daily username and password, you must obtain an internal account, and this internal account is generated by a certain algorithm from your original public username.

Step 1: After surfing the Internet normally, we see through "Network Connections" in the control panel that a broadband connection called rwpppoe is automatically generated.

Step 2: Then Ctrl+Alt+Del brings up Windows Task Manager and ends the Netcom client process. i.e., click"Broadband My World", and then tap"End the process".

But the rwpppoe in the network connection does not disappear, but the two small computers on the icon do not light up.

Step 3: Right-click RWPPPoE to view its properties, open the "Options" tab, check the box in front of "Prompt name, password, certificate, etc.", and confirm the modification result.

Step 4: Right-click on the icon of rwpppoe and disconnect. (It looks like the connection has been dropped after the process has ended).

Step 5: After turning rwpppoe off (or disconnecting), right-click on rwpppoe, then left-click"Links", and then a login box appears with the account number and password fields. At this time, there is a line of words in the account column (mine is a combination of letters, numbers and punctuation), and this is the real internal account name.

At this time, you can directly enter the password given to you by Netcom to connect directly to the network.

Three key places are coming:

Step 6: Disconnect, connect to the router (I am here D-Link DI-504), enter it in the address bar, press enter the dialog box that may pop up for you to enter the account password of the router, here is the default account is admin, the password is empty, just confirm it (if you have changed it in the router before, that is the new account password of the router you changed, not the Internet account provided by Netcom).

Step 7: Set up the wizard - > the next step (nothing special will always go to the next step) - select PPPoE when the WAN type - > enter the username and password when setting up PPPoE. The username is :

The internal username and password we just obtained is:"Broadband My World"password.

Pasted elsewhere, I used the D-Link 504m, which is how I found the account).

The specific settings are basically the same for all routers, and the instructions are exact. But there is a lot of one feature of dlink, that is, after the host is set up, other computers have no network. The solution is to change the position of those jacks after setting up, especially the first one, if you don't change the position, there is no network.

Take this opportunity to learn how to crack the client first, and find your real account that is not restricted by network energy, and the password is the original. It can be entered directly on the broadband connection. If not, it is recommended that you reinstall the system.

1. First use Netcom's new version of the dial-up pppoe program to dial up and connect to the network, after the dial-up is completed, click on the network neighbor network connection, and there will be a network connection called "rwpppoe" under the broadband, note that this connection will automatically disappear when the Netcom dial-up program is disconnected, and the following process must be executed after completing the dial-up with Netcom's own dial-up program. 2. End the dialer of Netcom in the task manager, and the "rwpppoe" connection will not disappear automatically in the network connection, right-click the "rwpppoe" icon and select "Properties", and in the "rwpppoe" property dialog box, select "Options" In the "Dialing Options" check the "prompt name, password and certificate" and select "Determine the rwpppoe setting method".

3. Right-click "rwpppoe" and select "Disconnect", and then dial with "rwpppoe", then a "connect rwpppoe" dialog box will appear, you will find that the user name in the dialog box is not the same as the user name you entered in the Netcom dialer, write down the user name in the dialog box, save it, this user name is the user name of the standard PPOE dialer we are looking for, so far we can talk to Netcom byebye.

4. It's easy to have a username, use XP's own dialer to create a new PPPOE broadband dial-up connection, the password is the original password of Netcom's dialer, (Netcom dialer is encrypted with the username), and then dial up, see if it's cool, at least save a lot of system expenses, and the dialing speed is particularly fast, and there is no longer a Netcom dialer which is a long suspected crash waiting interface :), Or directly enter the new username and original password into the PPPOE option of the router, I will say more about the steps, read the manual of the router, in short, there is no need to complete the Netcom dedicated router The above cracking process is carried out under the XP system, Vista system, Linux system does not support Netcom dialer system can use this method to obtain the real PPOE dial-up user name in the XP system now, and then use the PPPOE dialer that comes with the system to OK.

If you use a router to access the Internet, then you don't need to dial up, do you set dialing to turn on auto-dialing? If it is, then double-click to open it and remove the checkmark.

After connecting to the router, you don't need to dial up the number Set up dial-up on the router, and after the router dials the number, the computer in the intranet gets the IP address automatically assigned by the router and can access the Internet.

Dear Kingsoft users, hello:

Lenovo computer manager pop-up interception function is more powerful,Own ads are not bounced Lenovo computer manager interface of the "Lenovo customer service" function,You can contact the official customer service with one click,It is indeed very convenient Lenovo computer manager has its own Lenovo driver,Covering all Lenovo machines,So it is still your own software that knows your own hardware best Lenovo computer manager,Industry conscience,Safe and ad-free computer problems,You can find one-to-one remote service,Lenovo computer manager has the "Lenovo customer service" function,Computer Xiaobai's favorite is undoubted; If you have any questions about reinstalling the system, you can also consult the customer service of Lenovo Computer Manager.