Which brand of electric constant temperature incubator is better?

Guangdong Huankai drying oven is still good, the drying oven is safe, easy to operate, and the after-sales service is also good.

The electric constant temperature incubator adopts the method of electric heating, and heats the dry zone in the box through the heating tube, which is suitable for ordinary bacterial culture and closed cell culture, and is often used for the pre-heating of equipment and reagents related to cell culture. It is mainly composed of several parts, such as box, heater, blower and temperature controller.

The working principle of an electrically heated incubator.

The electric heating constant temperature incubator controls the power on time of the electric heating tube to keep the temperature constant at a certain value, and when the temperature is lower than this set temperature value, the electric heating tube starts to heat; When the temperature is higher than this set temperature, the electric heating tube stops heating.

In order to ensure that the internal temperature of the electric heating incubator is uniform, according to the size of the box, off-core fans with different powers will be installed near the electric heating tube, so that the temperature of the electric heating tube will be evenly and quickly distributed to the inside of the box. Through the internal air flow circulation of the box, the temperature is constant.

The working principle of an electrically heated incubator. jpg

The purpose of the electrically heated constant temperature incubator.

The electric constant temperature incubator is a small equipment that integrates heating, which is an ideal choice for agriculture and forestry, colleges and universities, and scientific research units. The electric constant temperature incubator is widely used in the seedling, germination, growth test, and plant growth of seeds, and can also be used for the storage and constant temperature test of other substances. The electrically heated incubator can be used as a customized incubator for E. coli culture in a food factory.

Features of the electrically heated incubator.

1. The electric heating constant temperature incubator adopts the structure of natural convection gas type, cold air enters from the bottom air inlet hole, rises from the convection space on the left and right sides after electric heating, and enters the inner chamber from the small holes of the flower plate on the left and right sides of the inner tank, and then escapes from the tuyere of the wind top, and the temperature of the inner chamber is uniform.

2. The shell of the electric constant temperature incubator is generally welded with thin steel plates, and the thermal insulation layer is filled with Hui insulation material to maintain the good thermal insulation performance of the box.

3. The outer door of the electric heating constant temperature incubator is a thin steel plate, and a double-glazed observation window is generally used to facilitate intuitive observation of the test situation, the handle is integrated with the locking device, and the hinge device opens and closes flexibly. The outer door and the box door frame are sealed with silicone rubber to prevent hot gas from escaping. The electrical parts are installed in the space on the left side of the box for easy maintenance and replacement.

4. The temperature control system of the electric constant temperature incubator uses a digital display thermometer, and uses a high-stability thermistor as a sensing reed temperature element, which has the advantages of sensitive temperature, small thermal inertia, high precision, stable performance, etc., and the digital display thermostat is easy to monitor and read due to the intuitive digital display, and it is also clearly visible in dark places.

Model Specification BPH-9052 Temperature Control Range: RT+5 80 Temperature Resolution: Temperature Fluctuation Rate:

Power supply voltage: 220V 50Hz Working Ambient Temperature: +5 40 Input Power:

250W Timing Range: 1 9999min Liner Size(mm)W D H:350 320 350 Carrier Bracket (Standard):

2 pieces BPH-9082 Temperature Control Range: RT+5 80 Temperature Resolution: Temperature Fluctuation Rate:

Power supply voltage: 220V 50Hz Working Ambient Temperature: +5 40 Input Power:

350W Timing Range: 1 9999min Liner Size(mm)W d H:400 400 500 Carrier Bracket (Standard):

2 pieces BPH-9162 Temperature control range: RT+5 80 Temperature resolution: Temperature fluctuation rate:

Power supply voltage: 220V 50Hz Working Ambient Temperature: +5 40 Input Power:

550W Timing Range: 1 9999min Liner Size(mm)W D H:500 370 800 Carrier Bracket (Standard):

2 pieces BPH-9272 Temperature Control Range: RT+5 80 Temperature Resolution: Temperature Fluctuation Rate:

Power supply voltage: 220V 50Hz Working Ambient Temperature: +5 40 Input Power:

750W Timing Range: 1 9999min Liner Size(mm)W D H:520 460 1050 Carrier Bracket (Standard):

2 pieces 1. When the test items are put into the incubator, close the door of the box, and properly unscrew the upper wind top flap on the top of the box. Directions for use.

2. Turn on the power supply and turn on the power switch.

3. Temperature setting: Operate the setting button on the layout of the thermostat and set the required temperature according to the operating instructions on the thermostat manual. Indicator light indication. The incubator is heated or at constant temperature with a green light indicator.

4. When using, it should prevent hard objects from contacting and colliding with the sensor probe to avoid damage.

5. For detailed instructions on the use of the thermostat, please refer to the instructions for the use of the thermostat.

The electrothermal constant temperature incubator is suitable for bacterial culture, fermentation and thermoelectric constant temperature incubator temperature test in scientific research and industrial production departments such as medical and health, pharmaceutical industry, biochemistry and agricultural science.

Product features: 1. The shell is made of high-quality cold-rolled steel plate, and the surface is made of electrostatic spraying process.

2. The studio is made of stainless steel plate or high-quality cold-rolled steel plate, and is treated with anti-rust and anti-corrosion.

3. Optional pointer thermostat or microcomputer intelligent thermostat, intelligent thermostat adopts PID control program, large-screen digital display, touch operation button, with over-temperature alarm function.

4. There is a double-layer tempered glass observation window in the middle of the door, which is convenient for direct observation of the changes of cultures.

5. The magnetic rubber strip is sealed, easy to open and close, and the sealing is good.

A box-shaped appliance used to raise or cultivate organisms or a part of a living organism (cells, etc.) at a certain temperature. In the past, some thermostats were used to incubate eggs by heating them with hot water (water temperature type), but most of them were electrically heated, equipped with an electric heater and a temperature regulator, and were a kind of box or cabinet with thermal insulation on the outer wall.

The principle of the incubator is actually relatively simple, and there are three key control parts:

1.Temperature Probe 2It's a refrigeration compressor.

3.Hot air blowers, some are heated with infrared rays, or directly with resistance wires.

The measuring end of the temperature probe stretches out in the air inside the incubator, can not contact with the object or the box, real-time monitoring of the temperature in the box, on the control panel, you can set the constant temperature range of the incubator, that is, set the upper and lower limits of the allowable temperature, when the probe detects that the temperature is lower than the lower limit, turn on the hot air blower heating. Temperatures are starting to rise. When the probe detects that the temperature is higher than the upper limit, the refrigeration compressor is turned on to cool and the temperature drops.

And so on and so forth.

For example, under normal circumstances, the temperature should start heating when it reaches the lower limit, and the heating is slightly later, because after the heating starts, the temperature may drop for a period of time, and the deviation can be set to heat or cool in advance.

So the two are different.

I recommend the domestic constant temperature incubator.

Suzhou Hisiyuan.

Incubator.

The electric constant temperature incubator is a kind of constant temperature incubator used by Yuheng for medical and health, pharmaceutical industry, biochemistry and agricultural science and other town shooting scientific research and industrial production departments for bacterial culture, fermentation and constant temperature testing.