What to do about scratches on the screen of a computer monitor?

Updated on number 2024-04-08
10 answers
  1. Anonymous users2024-02-07

    Method 1: Pencil Eraser.

    Generally speaking, the surface of the LCD screen is pasted with a layer film, which is called a polarizing film. Small scratches are common on it, so you need to pay attention to some details when dealing with scratches to avoid causing more damage.

    Scratched screen areas need to be cleaned before you get your hands dirty, and it's best not to use tap water and mineral water, as there are impurities in the middle of the platform that will damage the screen during the wiping process later. It is recommended to use filtered distilled water, dip a soft cotton cloth or mirror cloth and gently wipe the screen. If you use an old eraser, it will contain pencil slag, which will cause greater damage to the screen.

    Method 2: Wipe with white vinegar.

    Some friends may think of using alcohol to erase scratches, but the general high alcohol concentration will cause corrosion to the polarizing film, and if it is diluted, it is not easy to grasp the proportion of the solution, so it is recommended not to use alcohol and other cleaning agents.

    The ideal way to do this is to use the white vinegar that is commonly found at home and mix it with distilled water in a 1:1 ratio. Then fold the soft cotton cloth, dip it in the white vinegar solution, and gently wipe it (Figure 2). If the scratch is not easy to remove, you can increase the concentration of white vinegar a little and apply some pressure to wipe it, remembering not to use too much force.

    When the scratches disappear, you must also use another cotton cloth dipped in distilled water to clean the wiping area, clean off the white vinegar solution, and finally blot the remaining liquid dry.

    Method 3: Toothpaste with Vaseline.

    Another way is to use toothpaste to wipe the screen scratches, but the toothpaste on the market will contain an abrasive, which is calcium carbonate, which is a diamond-shaped tiny particle that can smooth out the scratches like sandpaper. If you are worried about damaging the LCD screen for a second time, you can also choose petroleum jelly with oily ingredients. The tool for applying Vaseline, you don't need a cotton cloth, you can apply it to the scratch with your fingers, and you can apply it for a little longer.

    Precautions. It is better not to use tap water and mineral water, if there are impurities that will damage the screen during the subsequent wiping process.

    The tool for applying Vaseline, you don't need a cotton cloth, you can apply it to the scratch with your fingers, and you can apply it for a little longer.

  2. Anonymous users2024-02-06

    For monitors, you can use commercially available laptop screens to clean cotton cloths, and if it's a physical scratch, there's no way to do it.

  3. Anonymous users2024-02-05

    The most practical way is to buy toothpaste, add a soft cloth and rub it vigorously, and it will be no problem to rub it for about ten minutes.

  4. Anonymous users2024-02-04

    Once there are physical traces, it cannot be returned

    Generally, you can use a cloth to wipe your eyes dryly, and some dirt really can't be wiped off, so you can wipe it on it

    Don't use any paper!

  5. Anonymous users2024-02-03

    Your monitor must be an LCD monitor, right?

    This kind of scratch can be fatal, but it is not impossible, go to a professional computer repair station to consult, it should be rewarding.

    As for the protection of the monitor, you can use the laptop screen on the market to clean the cotton cloth, wipe it clean and buy a special LCD screensaver for protection, there should be no problem.

  6. Anonymous users2024-02-02

    There's no way around that.

    The monitor should be wiped with a very soft cloth, and purified water can be used.

  7. Anonymous users2024-02-01

    No way. Take a look below.

    Patch film can be covered.

    It should be right.

  8. Anonymous users2024-01-31

    Patch film can be covered.

  9. Anonymous users2024-01-30

    There are scratches on the computer screen, and the method of dealing with them is as follows:

    1. Use a pencil eraser.

    Usually, a thin film is attached to the surface of the LCD screen, which is known as polarization.

    Membrane. Common small scratches will appear on it, so there are some details that need to be paid attention to when dealing with scratches to avoid causing more damage.

    To find the white eraser, you must use a new soft eraser. If you use an old eraser, which contains graphite slag from the pencil, this will cause more damage to the screen. Use an eraser to wipe in the direction of the scratch, with light force, until the scratch is completely gone.

    2. Wipe with white vinegar.

    Use white vinegar, which is common at home, and mix it with distilled water.

    Mix in a 1:1 ratio, then fold the soft cotton cloth and coat with a white vinegar solution. If the scratch is not easy to remove, you can increase the concentration of white vinegar and apply a little pressure to wipe it, not too much force, so as not to accidentally damage the screen.

  10. Anonymous users2024-01-29

    The repair methods for scratches on the computer screen are as follows:1If it is a slight scratch, use a special LCD screen scratch polishing paste, wipe it to the screen scratch, and gently wipe it with a soft cleaning cloth, the scratch will become lighter after wiping, and the effect of the treatment is good.

    2.There is a special LCD screen cleaning liquid sold on the market, and it may not be there when you clean the scratched surface. 3.

    If the first two methods don't work, you have to replace the display with a new one.

Related questions
5 answers2024-04-08

What to do if the computer monitor has a blurred screen.

13 answers2024-04-08

Lenovo computer boot display power-saving mode,There is a problem with the computer hardware,It is best to use the replacement method to eliminate the problem,Judgment method: >>>More

11 answers2024-04-08

1. Use win+r keys to bring up the run dialog box, enter the regedit command in the run window to open the registry; >>>More

3 answers2024-04-08

1. Problems with the graphics card.

If the graphics card is broken, there will be a blurred screen, and dust will also appear, check the graphics card, open the chassis to remove dust, this reason is the most likely. >>>More

11 answers2024-04-08

Find the button on the display, press the settings key, and adjust it by selecting the option to adjust the brightness depending on what is displayed.